@@ -64,6 +64,7 @@
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-mc.h>
#include <media/v4l2-of.h>
#include "isp.h"
@@ -657,216 +658,6 @@ static irqreturn_t isp_isr(int irq, void *_isp)
}
/* -----------------------------------------------------------------------------
- * Pipeline power management
- *
- * Entities must be powered up when part of a pipeline that contains at least
- * one open video device node.
- *
- * To achieve this use the entity use_count field to track the number of users.
- * For entities corresponding to video device nodes the use_count field stores
- * the users count of the node. For entities corresponding to subdevs the
- * use_count field stores the total number of users of all video device nodes
- * in the pipeline.
- *
- * The omap3isp_pipeline_pm_use() function must be called in the open() and
- * close() handlers of video device nodes. It increments or decrements the use
- * count of all subdev entities in the pipeline.
- *
- * To react to link management on powered pipelines, the link setup notification
- * callback updates the use count of all entities in the source and sink sides
- * of the link.
- */
-
-/*
- * isp_pipeline_pm_use_count - Count the number of users of a pipeline
- * @entity: The entity
- *
- * Return the total number of users of all video device nodes in the pipeline.
- */
-static int isp_pipeline_pm_use_count(struct media_entity *entity,
- struct media_entity_graph *graph)
-{
- int use = 0;
-
- media_entity_graph_walk_start(graph, entity);
-
- while ((entity = media_entity_graph_walk_next(graph))) {
- if (is_media_entity_v4l2_io(entity))
- use += entity->use_count;
- }
-
- return use;
-}
-
-/*
- * isp_pipeline_pm_power_one - Apply power change to an entity
- * @entity: The entity
- * @change: Use count change
- *
- * Change the entity use count by @change. If the entity is a subdev update its
- * power state by calling the core::s_power operation when the use count goes
- * from 0 to != 0 or from != 0 to 0.
- *
- * Return 0 on success or a negative error code on failure.
- */
-static int isp_pipeline_pm_power_one(struct media_entity *entity, int change)
-{
- struct v4l2_subdev *subdev;
- int ret;
-
- subdev = is_media_entity_v4l2_subdev(entity)
- ? media_entity_to_v4l2_subdev(entity) : NULL;
-
- if (entity->use_count == 0 && change > 0 && subdev != NULL) {
- ret = v4l2_subdev_call(subdev, core, s_power, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return ret;
- }
-
- entity->use_count += change;
- WARN_ON(entity->use_count < 0);
-
- if (entity->use_count == 0 && change < 0 && subdev != NULL)
- v4l2_subdev_call(subdev, core, s_power, 0);
-
- return 0;
-}
-
-/*
- * isp_pipeline_pm_power - Apply power change to all entities in a pipeline
- * @entity: The entity
- * @change: Use count change
- *
- * Walk the pipeline to update the use count and the power state of all non-node
- * entities.
- *
- * Return 0 on success or a negative error code on failure.
- */
-static int isp_pipeline_pm_power(struct media_entity *entity, int change,
- struct media_entity_graph *graph)
-{
- struct media_entity *first = entity;
- int ret = 0;
-
- if (!change)
- return 0;
-
- media_entity_graph_walk_start(graph, entity);
-
- while (!ret && (entity = media_entity_graph_walk_next(graph)))
- if (is_media_entity_v4l2_subdev(entity))
- ret = isp_pipeline_pm_power_one(entity, change);
-
- if (!ret)
- return ret;
-
- media_entity_graph_walk_start(graph, first);
-
- while ((first = media_entity_graph_walk_next(graph))
- && first != entity)
- if (is_media_entity_v4l2_subdev(first))
- isp_pipeline_pm_power_one(first, -change);
-
- return ret;
-}
-
-/*
- * omap3isp_pipeline_pm_use - Update the use count of an entity
- * @entity: The entity
- * @use: Use (1) or stop using (0) the entity
- *
- * Update the use count of all entities in the pipeline and power entities on or
- * off accordingly.
- *
- * Return 0 on success or a negative error code on failure. Powering entities
- * off is assumed to never fail. No failure can occur when the use parameter is
- * set to 0.
- */
-int omap3isp_pipeline_pm_use(struct media_entity *entity, int use,
- struct media_entity_graph *graph)
-{
- int change = use ? 1 : -1;
- int ret;
-
- mutex_lock(&entity->graph_obj.mdev->graph_mutex);
-
- /* Apply use count to node. */
- entity->use_count += change;
- WARN_ON(entity->use_count < 0);
-
- /* Apply power change to connected non-nodes. */
- ret = isp_pipeline_pm_power(entity, change, graph);
- if (ret < 0)
- entity->use_count -= change;
-
- mutex_unlock(&entity->graph_obj.mdev->graph_mutex);
-
- return ret;
-}
-
-/*
- * isp_pipeline_link_notify - Link management notification callback
- * @link: The link
- * @flags: New link flags that will be applied
- * @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*)
- *
- * React to link management on powered pipelines by updating the use count of
- * all entities in the source and sink sides of the link. Entities are powered
- * on or off accordingly.
- *
- * Return 0 on success or a negative error code on failure. Powering entities
- * off is assumed to never fail. This function will not fail for disconnection
- * events.
- */
-static int isp_pipeline_link_notify(struct media_link *link, u32 flags,
- unsigned int notification)
-{
- struct media_entity_graph *graph =
- &container_of(link->graph_obj.mdev, struct isp_device,
- media_dev)->pm_count_graph;
- struct media_entity *source = link->source->entity;
- struct media_entity *sink = link->sink->entity;
- int source_use;
- int sink_use;
- int ret = 0;
-
- if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH) {
- ret = media_entity_graph_walk_init(graph,
- link->graph_obj.mdev);
- if (ret)
- return ret;
- }
-
- source_use = isp_pipeline_pm_use_count(source, graph);
- sink_use = isp_pipeline_pm_use_count(sink, graph);
-
- if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH &&
- !(flags & MEDIA_LNK_FL_ENABLED)) {
- /* Powering off entities is assumed to never fail. */
- isp_pipeline_pm_power(source, -sink_use, graph);
- isp_pipeline_pm_power(sink, -source_use, graph);
- return 0;
- }
-
- if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH &&
- (flags & MEDIA_LNK_FL_ENABLED)) {
-
- ret = isp_pipeline_pm_power(source, sink_use, graph);
- if (ret < 0)
- return ret;
-
- ret = isp_pipeline_pm_power(sink, source_use, graph);
- if (ret < 0)
- isp_pipeline_pm_power(source, -sink_use, graph);
- }
-
- if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH)
- media_entity_graph_walk_cleanup(graph);
-
- return ret;
-}
-
-/* -----------------------------------------------------------------------------
* Pipeline stream management
*/
@@ -1889,7 +1680,7 @@ static int isp_register_entities(struct isp_device *isp)
strlcpy(isp->media_dev.model, "TI OMAP3 ISP",
sizeof(isp->media_dev.model));
isp->media_dev.hw_revision = isp->revision;
- isp->media_dev.link_notify = isp_pipeline_link_notify;
+ isp->media_dev.link_notify = v4l2_pipeline_link_notify;
media_device_init(&isp->media_dev);
isp->v4l2_dev.mdev = &isp->media_dev;
@@ -177,7 +177,6 @@ struct isp_device {
struct v4l2_device v4l2_dev;
struct v4l2_async_notifier notifier;
struct media_device media_dev;
- struct media_entity_graph pm_count_graph;
struct device *dev;
u32 revision;
@@ -267,9 +266,6 @@ void omap3isp_subclk_enable(struct isp_device *isp,
void omap3isp_subclk_disable(struct isp_device *isp,
enum isp_subclk_resource res);
-int omap3isp_pipeline_pm_use(struct media_entity *entity, int use,
- struct media_entity_graph *graph);
-
int omap3isp_register_entities(struct platform_device *pdev,
struct v4l2_device *v4l2_dev);
void omap3isp_unregister_entities(struct platform_device *pdev);
@@ -22,8 +22,10 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+
#include <media/v4l2-dev.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
#include <media/videobuf2-dma-contig.h>
#include "ispvideo.h"
@@ -1292,12 +1294,7 @@ static int isp_video_open(struct file *file)
goto done;
}
- ret = media_entity_graph_walk_init(&handle->graph,
- &video->isp->media_dev);
- if (ret)
- goto done;
-
- ret = omap3isp_pipeline_pm_use(&video->video.entity, 1, &handle->graph);
+ ret = v4l2_pipeline_pm_use(&video->video.entity, 1);
if (ret < 0) {
omap3isp_put(video->isp);
goto done;
@@ -1328,7 +1325,6 @@ static int isp_video_open(struct file *file)
done:
if (ret < 0) {
v4l2_fh_del(&handle->vfh);
- media_entity_graph_walk_cleanup(&handle->graph);
kfree(handle);
}
@@ -1348,8 +1344,7 @@ static int isp_video_release(struct file *file)
vb2_queue_release(&handle->queue);
mutex_unlock(&video->queue_lock);
- omap3isp_pipeline_pm_use(&video->video.entity, 0, &handle->graph);
- media_entity_graph_walk_cleanup(&handle->graph);
+ v4l2_pipeline_pm_use(&video->video.entity, 0);
/* Release the file handle. */
v4l2_fh_del(vfh);
@@ -189,7 +189,6 @@ struct isp_video_fh {
struct vb2_queue queue;
struct v4l2_format format;
struct v4l2_fract timeperframe;
- struct media_entity_graph graph;
};
#define to_isp_video_fh(fh) container_of(fh, struct isp_video_fh, vfh)
Power on devices represented by entities in the graph through the pipeline state using V4L2 graph PM operations instead of what was in the omap3isp driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/platform/omap3isp/isp.c | 213 +---------------------------- drivers/media/platform/omap3isp/isp.h | 4 - drivers/media/platform/omap3isp/ispvideo.c | 13 +- drivers/media/platform/omap3isp/ispvideo.h | 1 - 4 files changed, 6 insertions(+), 225 deletions(-)