@@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
-ifeq ($(IGNORE_DOCBOOKS),)
+ifeq ($(IGNORE_DOCBOOKS)$(SPHINXDIRS),)
DOCBOOKS := z8530book.xml device-drivers.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
@@ -5,9 +5,13 @@
# You can set these variables from the command line.
SPHINXBUILD = sphinx-build
SPHINXOPTS =
+SPHINXDIRS = .
+_SPHINXDIRS = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
+SPHINX_CONF = conf.py
PAPER =
BUILDDIR = $(obj)/output
+
# User-friendly check for sphinx-build
HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
@@ -33,35 +37,50 @@ PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
KERNELDOC = $(srctree)/scripts/kernel-doc
KERNELDOC_CONF = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
-ALLSPHINXOPTS = -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) -d $(BUILDDIR)/.doctrees $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) -c $(srctree)/$(src) $(SPHINXOPTS)
+ALLSPHINXOPTS = $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-quiet_cmd_sphinx = SPHINX $@
- cmd_sphinx = BUILDDIR=$(BUILDDIR) $(SPHINXBUILD) -b $2 $(ALLSPHINXOPTS) $(srctree)/$(src)$3 $(BUILDDIR)/$2
-
-# Build only the media docs, in nitpick mode
-mediadocs:
- $(MAKE) BUILDDIR=$(BUILDDIR) SPHINX_CONF=media/conf_nitpick.py -f $(srctree)/Documentation/media/Makefile htmldocs
- $(call cmd,sphinx,html,/media)
+# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
+loop_cmd = $(echo-cmd) $(cmd_$(1))
+
+# $2 sphinx builder e.g. "html"
+# $3 name of the build subfolder / e.g. "media", used as:
+# * dest folder relative to $(BUILDDIR) and
+# * cache folder relative to $(BUILDDIR)/.doctrees
+# $4 dest subfolder e.g. "man" for man pages at media/man
+# $5 reST source folder relative to $(srctree)/$(src),
+# e.g. "media" for the linux-tv book-set at ./Documentation/media
+
+quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4);
+ cmd_sphinx = BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+ $(SPHINXBUILD) \
+ -b $2 \
+ -c $(abspath $(srctree)/$(src)) \
+ -d $(abspath $(BUILDDIR)/.doctrees/$3) \
+ -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
+ $(ALLSPHINXOPTS) \
+ $(abspath $(srctree)/$(src)/$5) \
+ $(abspath $(BUILDDIR)/$3/$4);
htmldocs:
- $(MAKE) BUILDDIR=$(BUILDDIR) -f $(srctree)/Documentation/media/Makefile $@
- $(call cmd,sphinx,html)
+ $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) -f $(srctree)/Documentation/media/Makefile $@
+ @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
+
pdfdocs:
ifeq ($(HAVE_RST2PDF),0)
$(warning The Python 'rst2pdf' module was not found. Make sure you have the module installed to produce PDF output.)
@echo " SKIP Sphinx $@ target."
else # HAVE_RST2PDF
- $(call cmd,sphinx,pdf)
+ @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,pdf,$(var),pdf,$(var)))
endif # HAVE_RST2PDF
epubdocs:
- $(call cmd,sphinx,epub)
+ @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
xmldocs:
- $(call cmd,sphinx,xml)
+ @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
# no-ops for the Sphinx toolchain
sgmldocs:
@@ -75,10 +94,15 @@ cleandocs:
dochelp:
@echo ' Linux kernel internal documentation in different formats (Sphinx):'
@echo ' htmldocs - HTML'
- @echo ' mediadocs - built only media books in HTML on nitpick mode'
@echo ' pdfdocs - PDF'
@echo ' epubdocs - EPUB'
@echo ' xmldocs - XML'
@echo ' cleandocs - clean all generated files'
+ @echo
+ @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+ @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
+ @echo
+ @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
+ @echo ' configuration. This is e.g. useful to build with nit-picking config.'
endif # HAVE_SPHINX
@@ -2,6 +2,7 @@
# pylint: disable=R0903, C0330, R0914, R0912, E0401
import os
+import sys
from sphinx.util.pycompat import execfile_
# ------------------------------------------------------------------------------
@@ -16,10 +17,17 @@ def loadConfig(namespace):
maintain *build themes*. """
config_file = os.environ.get("SPHINX_CONF", None)
- if config_file is not None and os.path.exists(config_file):
+ if (config_file is not None
+ and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
config_file = os.path.abspath(config_file)
- config = namespace.copy()
- config['__file__'] = config_file
- execfile_(config_file, config)
- del config['__file__']
- namespace.update(config)
+
+ if os.path.isfile(config_file):
+ sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
+ config = namespace.copy()
+ config['__file__'] = config_file
+ execfile_(config_file, config)
+ del config['__file__']
+ namespace.update(config)
+ else:
+ sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)
+
@@ -1439,12 +1439,6 @@ $(DOC_TARGETS): scripts_basic FORCE
$(Q)$(MAKE) $(build)=Documentation -f $(srctree)/Documentation/Makefile.sphinx $@
$(Q)$(MAKE) $(build)=Documentation/DocBook $@
-DOC_NITPIC_TARGETS := mediadocs
-PHONY += $(DOC_NITPIC_TARGETS)
-$(DOC_NITPIC_TARGETS): scripts_basic FORCE
- $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
- $(Q)$(MAKE) $(build)=Documentation -f $(srctree)/Documentation/Makefile.sphinx $@
-
else # KBUILD_EXTMOD
###