@@ -488,18 +488,6 @@ static int mn88472_probe(struct i2c_client *client,
goto err_kfree;
}
- /* Check demod answers with correct chip id */
- ret = regmap_read(dev->regmap[0], 0xff, &utmp);
- if (ret)
- goto err_regmap_0_regmap_exit;
-
- dev_dbg(&client->dev, "chip id=%02x\n", utmp);
-
- if (utmp != 0x02) {
- ret = -ENODEV;
- goto err_regmap_0_regmap_exit;
- }
-
/*
* Chip has three I2C addresses for different register banks. Used
* addresses are 0x18, 0x1a and 0x1c. We register two dummy clients,
@@ -536,6 +524,18 @@ static int mn88472_probe(struct i2c_client *client,
}
i2c_set_clientdata(dev->client[2], dev);
+ /* Check demod answers with correct chip id */
+ ret = regmap_read(dev->regmap[2], 0xff, &utmp);
+ if (ret)
+ goto err_regmap_2_regmap_exit;
+
+ dev_dbg(&client->dev, "chip id=%02x\n", utmp);
+
+ if (utmp != 0x02) {
+ ret = -ENODEV;
+ goto err_regmap_2_regmap_exit;
+ }
+
/* Sleep because chip is active by default */
ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
if (ret)
A register used to identify chip during probe was overwritten during firmware download and due to that later probe's for warm chip were failing. Detect chip from the another register, which is located on different register bank 2. Fixes: 94d0eaa41987 ("[media] mn88472: move out of staging to media") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/mn88472.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html