@@ -2,6 +2,7 @@ config VIDEO_VIMC
tristate "Virtual Media Controller Driver (VIMC)"
depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_VMALLOC
+ select VIDEO_V4L2_TPG
default n
---help---
Skeleton driver for Virtual Media Controller
@@ -20,17 +20,20 @@
#include <linux/v4l2-mediabus.h>
#include <linux/vmalloc.h>
#include <media/v4l2-subdev.h>
+#include <media/v4l2-tpg.h>
#include "vimc-sensor.h"
+#define VIMC_SEN_FRAME_MAX_WIDTH 4096
+
struct vimc_sen_device {
struct vimc_ent_device ved;
struct v4l2_subdev sd;
+ struct tpg_data tpg;
struct task_struct *kthread_sen;
u8 *frame;
/* The active format */
struct v4l2_mbus_framefmt mbus_format;
- int frame_size;
};
static int vimc_sen_enum_mbus_code(struct v4l2_subdev *sd,
@@ -84,6 +87,24 @@ static int vimc_sen_get_fmt(struct v4l2_subdev *sd,
return 0;
}
+static void vimc_sen_tpg_s_format(struct vimc_sen_device *vsen)
+{
+ const struct vimc_pix_map *vpix =
+ vimc_pix_map_by_code(vsen->mbus_format.code);
+
+ tpg_reset_source(&vsen->tpg, vsen->mbus_format.width,
+ vsen->mbus_format.height, vsen->mbus_format.field);
+ tpg_s_bytesperline(&vsen->tpg, 0, vsen->mbus_format.width * vpix->bpp);
+ tpg_s_buf_height(&vsen->tpg, vsen->mbus_format.height);
+ tpg_s_fourcc(&vsen->tpg, vpix->pixelformat);
+ /* TODO: add support for V4L2_FIELD_ALTERNATE */
+ tpg_s_field(&vsen->tpg, vsen->mbus_format.field, false);
+ tpg_s_colorspace(&vsen->tpg, vsen->mbus_format.colorspace);
+ tpg_s_ycbcr_enc(&vsen->tpg, vsen->mbus_format.ycbcr_enc);
+ tpg_s_quantization(&vsen->tpg, vsen->mbus_format.quantization);
+ tpg_s_xfer_func(&vsen->tpg, vsen->mbus_format.xfer_func);
+}
+
static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = {
.enum_mbus_code = vimc_sen_enum_mbus_code,
.enum_frame_size = vimc_sen_enum_frame_size,
@@ -97,7 +118,7 @@ static const struct media_entity_operations vimc_sen_mops = {
.link_validate = v4l2_subdev_link_validate,
};
-static int vimc_thread_sen(void *data)
+static int vimc_sen_tpg_thread(void *data)
{
struct vimc_sen_device *vsen = data;
unsigned int i;
@@ -110,7 +131,7 @@ static int vimc_thread_sen(void *data)
if (kthread_should_stop())
break;
- memset(vsen->frame, 100, vsen->frame_size);
+ tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
/* Send the frame to all source pads */
for (i = 0; i < vsen->sd.entity.num_pads; i++)
@@ -132,26 +153,31 @@ static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
if (enable) {
const struct vimc_pix_map *vpix;
+ unsigned int frame_size;
if (vsen->kthread_sen)
- return -EINVAL;
+ /* tpg is already executing */
+ return 0;
/* Calculate the frame size */
vpix = vimc_pix_map_by_code(vsen->mbus_format.code);
- vsen->frame_size = vsen->mbus_format.width * vpix->bpp *
- vsen->mbus_format.height;
+ frame_size = vsen->mbus_format.width * vpix->bpp *
+ vsen->mbus_format.height;
/*
* Allocate the frame buffer. Use vmalloc to be able to
* allocate a large amount of memory
*/
- vsen->frame = vmalloc(vsen->frame_size);
+ vsen->frame = vmalloc(frame_size);
if (!vsen->frame)
return -ENOMEM;
+ /* configure the test pattern generator */
+ vimc_sen_tpg_s_format(vsen);
+
/* Initialize the image generator thread */
- vsen->kthread_sen = kthread_run(vimc_thread_sen, vsen, "%s-sen",
- vsen->sd.v4l2_dev->name);
+ vsen->kthread_sen = kthread_run(vimc_sen_tpg_thread, vsen,
+ "%s-sen", vsen->sd.v4l2_dev->name);
if (IS_ERR(vsen->kthread_sen)) {
dev_err(vsen->sd.v4l2_dev->dev,
"%s: kernel_thread() failed\n", vsen->sd.name);
@@ -161,15 +187,17 @@ static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
}
} else {
if (!vsen->kthread_sen)
- return -EINVAL;
+ return 0;
/* Stop image generator */
ret = kthread_stop(vsen->kthread_sen);
- vsen->kthread_sen = NULL;
+ if (ret)
+ return ret;
+ vsen->kthread_sen = NULL;
vfree(vsen->frame);
vsen->frame = NULL;
- return ret;
+ return 0;
}
return 0;
@@ -189,6 +217,7 @@ static void vimc_sen_destroy(struct vimc_ent_device *ved)
struct vimc_sen_device *vsen =
container_of(ved, struct vimc_sen_device, ved);
+ tpg_free(&vsen->tpg);
v4l2_device_unregister_subdev(&vsen->sd);
media_entity_cleanup(ved->ent);
kfree(vsen);
@@ -254,17 +283,26 @@ struct vimc_ent_device *vimc_sen_create(struct v4l2_device *v4l2_dev,
vsen->mbus_format.quantization = V4L2_QUANTIZATION_FULL_RANGE;
vsen->mbus_format.xfer_func = V4L2_XFER_FUNC_SRGB;
+ /* Initialize the test pattern generator */
+ tpg_init(&vsen->tpg, vsen->mbus_format.width,
+ vsen->mbus_format.height);
+ ret = tpg_alloc(&vsen->tpg, VIMC_SEN_FRAME_MAX_WIDTH);
+ if (ret)
+ goto err_clean_m_ent;
+
/* Register the subdev with the v4l2 and the media framework */
ret = v4l2_device_register_subdev(v4l2_dev, &vsen->sd);
if (ret) {
dev_err(vsen->sd.v4l2_dev->dev,
"%s: subdev register failed (err=%d)\n",
vsen->sd.name, ret);
- goto err_clean_m_ent;
+ goto err_free_tpg;
}
return &vsen->ved;
+err_free_tpg:
+ tpg_free(&vsen->tpg);
err_clean_m_ent:
media_entity_cleanup(&vsen->sd.entity);
err_clean_pads:
Initialize the test pattern generator on the sensor Generate a colored bar image instead of a grey one Signed-off-by: Helen Koike <helen.koike@collabora.com> --- Changes in v4: None Changes in v3: [media] vimc: sen: Integrate the tpg on the sensor - Declare frame_size as a local variable - Set tpg frame format before starting kthread - s_stream(sd, 1): return 0 if stream is already enabled - s_stream(sd, 0): return 0 if stream is already disabled - s_stream: propagate error from kthread_stop - coding style when calling tpg_s_bytesperline - s/vimc_thread_sen/vimc_sen_tpg_thread - fix multiline comment - remove V4L2_FIELD_ALTERNATE from tpg_s_field - remove V4L2_STD_PAL from tpg_fill_plane_buffer Changes in v2: [media] vimc: sen: Integrate the tpg on the sensor - Fix include location - Select V4L2_TPG in Kconfig - configure tpg on streamon only - rm BUG_ON - coding style --- drivers/media/platform/vimc/Kconfig | 1 + drivers/media/platform/vimc/vimc-sensor.c | 64 ++++++++++++++++++++++++------- 2 files changed, 52 insertions(+), 13 deletions(-)