@@ -922,6 +922,45 @@ struct cx231xx_board cx231xx_boards[] = {
.gpio = NULL,
} },
},
+ [CX231XX_BOARD_HAUPPAUGE_935C] = {
+ .name = "Hauppauge WinTV-HVR-935C",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x60,
+ .tuner_gpio = RDE250_XCV_TUNER,
+ .tuner_sif_gpio = 0x05,
+ .tuner_scl_gpio = 0x1a,
+ .tuner_sda_gpio = 0x1b,
+ .decoder = CX231XX_AVDECODER,
+ .output_mode = OUT_MODE_VIP11,
+ .demod_xfer_mode = 0,
+ .ctl_pin_status_mask = 0xFFFFFFC4,
+ .agc_analog_digital_select_gpio = 0x0c,
+ .gpio_pin_status_mask = 0x4001000,
+ .tuner_i2c_master = I2C_1_MUX_3,
+ .demod_i2c_master = I2C_1_MUX_3,
+ .has_dvb = 1,
+ .demod_addr = 0x64, /* 0xc8 >> 1 */
+ .norm = V4L2_STD_PAL,
+
+ .input = {{
+ .type = CX231XX_VMUX_TELEVISION,
+ .vmux = CX231XX_VIN_3_1,
+ .amux = CX231XX_AMUX_VIDEO,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_COMPOSITE1,
+ .vmux = CX231XX_VIN_2_1,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_SVIDEO,
+ .vmux = CX231XX_VIN_1_1 |
+ (CX231XX_VIN_1_2 << 8) |
+ CX25840_SVIDEO_ON,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ } },
+ },
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
@@ -953,6 +992,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
{USB_DEVICE(0x2040, 0xb123),
.driver_info = CX231XX_BOARD_HAUPPAUGE_955Q},
+ {USB_DEVICE(0x2040, 0xb151),
+ .driver_info = CX231XX_BOARD_HAUPPAUGE_935C},
{USB_DEVICE(0x2040, 0xb130),
.driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
{USB_DEVICE(0x2040, 0xb131),
@@ -1211,6 +1252,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
case CX231XX_BOARD_HAUPPAUGE_955Q:
+ case CX231XX_BOARD_HAUPPAUGE_935C:
{
struct eeprom {
struct tveeprom tvee;
@@ -1068,6 +1068,81 @@ static int dvb_init(struct cx231xx *dev)
&astrometa_t2hybrid_r820t_config);
break;
}
+ case CX231XX_BOARD_HAUPPAUGE_935C:
+ {
+ struct i2c_client *client;
+ struct i2c_adapter *adapter;
+ struct i2c_board_info info = {};
+ struct si2157_config si2157_config = {};
+ struct si2168_config si2168_config = {};
+
+ /* attach demodulator chip */
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+ si2168_config.fe = &dev->dvb->frontend;
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.ts_clock_inv = true;
+
+ strlcpy(info.type, "si2168", sizeof(info.type));
+ info.addr = dev->board.demod_addr;
+ info.platform_data = &si2168_config;
+
+ request_module(info.type);
+ client = i2c_new_device(demod_i2c, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dev_err(dev->dev,
+ "Failed to attach %s frontend.\n", info.type);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+ dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
+
+ /* define general-purpose callback pointer */
+ dvb->frontend->callback = cx231xx_tuner_callback;
+
+ /* attach tuner */
+ si2157_config.fe = dev->dvb->frontend;
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ si2157_config.mdev = dev->media_dev;
+#endif
+ si2157_config.if_port = 1;
+ si2157_config.inversion = true;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = dev->board.tuner_addr;
+ info.platform_data = &si2157_config;
+ request_module("si2157");
+
+ client = i2c_new_device(adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ dev_err(dev->dev,
+ "Failed to obtain %s tuner.\n", info.type);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dev->cx231xx_reset_analog_tuner = NULL;
+ dev->dvb->i2c_client_tuner = client;
+ break;
+ }
default:
dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
@@ -81,6 +81,7 @@
#define CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD 23
#define CX231XX_BOARD_ASTROMETA_T2HYBRID 24
#define CX231XX_BOARD_THE_IMAGING_SOURCE_DFG_USB2_PRO 25
+#define CX231XX_BOARD_HAUPPAUGE_935C 26
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
HVR-935C is hybrid PAL, DVB-C/T/T2 usb device. CX23102 + Si2168 + Si2157 and composite/s-video + stereo audio capture via breakout cable Signed-off-by: Brad Love <brad@nextdimension.cc> --- Changes since v1: - add capture properties to message drivers/media/usb/cx231xx/cx231xx-cards.c | 42 +++++++++++++++++ drivers/media/usb/cx231xx/cx231xx-dvb.c | 75 +++++++++++++++++++++++++++++++ drivers/media/usb/cx231xx/cx231xx.h | 1 + 3 files changed, 118 insertions(+)