@@ -771,11 +771,21 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885] = {
+ .name = "Hauppauge WinTV-QuadHD-DVB(885)",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
[CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
.name = "Hauppauge WinTV-QuadHD-ATSC",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885] = {
+ .name = "Hauppauge WinTV-QuadHD-ATSC(885)",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
[CX23885_BOARD_HAUPPAUGE_HVR1265_K4] = {
.name = "Hauppauge WinTV-HVR-1265(161111)",
.porta = CX23885_ANALOG_VIDEO,
@@ -1323,25 +1333,25 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 161111:
/* WinTV-HVR-1265 K4 (PCIe, Analog/ATSC/QAM-B) */
break;
- case 166100:
+ case 166100: /* 888 version, hybrid */
+ case 166200: /* 885 version, DVB only */
/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
- case 166101:
+ case 166101: /* 888 version, hybrid */
+ case 166201: /* 885 version, DVB only */
/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
- case 165100:
- /*
- * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
- * ATSC, ATSC
- */
+ case 165100: /* 888 version, hybrid */
+ case 165200: /* 885 version, digital only */
+ /* WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+ * ATSC/QAM-B, ATSC/QAM-B */
break;
- case 165101:
- /*
- * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
- * ATSC, ATSC
- */
+ case 165101: /* 888 version, hybrid */
+ case 165201: /* 885 version, digital only */
+ /* WinTV-QuadHD (ATSC) Tuner Pair 2 (PCIe, IR, half height,
+ * ATSC/QAM-B, ATSC/QAM-B */
break;
default:
pr_warn("%s: warning: unknown hauppauge model #%d\n",
@@ -1847,6 +1857,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
*/
break;
case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
/*
* GPIO-08 TER1_RESN
* GPIO-09 TER2_RESN
@@ -2106,7 +2118,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
case CX23885_BOARD_HAUPPAUGE_STARBURST2:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -2255,7 +2269,9 @@ void cx23885_card_setup(struct cx23885_dev *dev)
break;
case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
@@ -2313,6 +2329,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
@@ -869,6 +869,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
cx23885_card_list(dev);
}
+ if (dev->pci->device == 0x8852) {
+ /* no DIF on cx23885, so no analog tuner support possible */
+ if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC)
+ dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885;
+ else if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB)
+ dev->board = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885;
+ }
+
/* If the user specific a clk freq override, apply it */
if (cx23885_boards[dev->board].clk_freq > 0)
dev->clk_freq = cx23885_boards[dev->board].clk_freq;
@@ -2333,6 +2333,9 @@ static int dvb_register(struct cx23885_tsport *port)
}
break;
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:
+ pr_info("%s(): board=%d port=%d\n", __func__,
+ dev->board, port->nr);
switch (port->nr) {
/* port b - Terrestrial/cable */
case 1:
@@ -2430,6 +2433,9 @@ static int dvb_register(struct cx23885_tsport *port)
}
break;
case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:
+ pr_info("%s(): board=%d port=%d\n", __func__,
+ dev->board, port->nr);
switch (port->nr) {
/* port b - Terrestrial/cable */
case 1:
@@ -109,6 +109,8 @@
#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC 57
#define CX23885_BOARD_HAUPPAUGE_HVR1265_K4 58
#define CX23885_BOARD_HAUPPAUGE_STARBURST2 59
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885 60
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885 61
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
Add new QuadHD digital only PCIe boards to driver list. Differentiate them from 888 digital/analog QuadHD models. Signed-off-by: Brad Love <brad@nextdimension.cc> --- Changes since v1: - regen for dependency drivers/media/pci/cx23885/cx23885-cards.c | 42 ++++++++++++++++++++++--------- drivers/media/pci/cx23885/cx23885-core.c | 8 ++++++ drivers/media/pci/cx23885/cx23885-dvb.c | 6 +++++ drivers/media/pci/cx23885/cx23885.h | 2 ++ 4 files changed, 46 insertions(+), 12 deletions(-)