diff mbox

[2/4] cx23885: change 887/888 default to 888

Message ID 1518479048-10192-3-git-send-email-brad@nextdimension.cc (mailing list archive)
State New, archived
Headers show

Commit Message

Brad Love Feb. 12, 2018, 11:44 p.m. UTC 
Proper cx2388x chip type is detected in cx25840 probe, the clock
rate is untouched however in probe. The cx25840 only checks for
non default clock values for 888 and provides custom settings for
25MHz 888. This change ensures that cx23888 chips with default 50MHz
crystals will not get configured as if they have 25MHz crystals. A
cx23887 board will continue to be configured for 25Hz crystal as
there is no custom clock support included for it.

Signed-off-by: Brad Love <brad@nextdimension.cc>
---
 drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index 8afddd6..2c76a02 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -839,10 +839,10 @@  static int cx23885_dev_setup(struct cx23885_dev *dev)
 
 	/* Configure the internal memory */
 	if (dev->pci->device == 0x8880) {
-		/* Could be 887 or 888, assume a default */
-		dev->bridge = CX23885_BRIDGE_887;
+		/* Could be 887 or 888, assume an 888 default */
+		dev->bridge = CX23885_BRIDGE_888;
 		/* Apply a sensible clock frequency for the PCIe bridge */
-		dev->clk_freq = 25000000;
+		dev->clk_freq = 50000000;
 		dev->sram_channels = cx23887_sram_channels;
 	} else
 	if (dev->pci->device == 0x8852) {