diff mbox series

[v4,2/5] media: i2c: ov5645: Switch to assigned-clock-rates

Message ID 1584620363-2255-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State New, archived
Headers show
Series ov5645: Deprecate usage of the clock-frequency | expand

Commit Message

Lad Prabhakar March 19, 2020, 12:19 p.m. UTC 
This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate when
assigned-clock-rates is passed.

The driver now sets the clock frequency only if the deprecated property
clock-frequency is defined instead assigned-clock-rates, this is to avoid
breakage with existing DT binaries.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/ov5645.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d15d754..e298acdadeef 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1094,25 +1094,25 @@  static int ov5645_probe(struct i2c_client *client)
 		return PTR_ERR(ov5645->xclk);
 	}
 
-	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
-	if (ret) {
-		dev_err(dev, "could not get xclk frequency\n");
-		return ret;
+	/* check if deprecated property clock-frequency is defined */
+	ret = of_property_read_u32(dev->of_node, "clock-frequency",
+				   &xclk_freq);
+	if (!ret) {
+		ret = clk_set_rate(ov5645->xclk, xclk_freq);
+		if (ret) {
+			dev_err(dev, "could not set xclk frequency\n");
+			return ret;
+		}
 	}
 
 	/* external clock must be 24MHz, allow 1% tolerance */
+	xclk_freq = clk_get_rate(ov5645->xclk);
 	if (xclk_freq < 23760000 || xclk_freq > 24240000) {
 		dev_err(dev, "external clock frequency %u is not supported\n",
 			xclk_freq);
 		return -EINVAL;
 	}
 
-	ret = clk_set_rate(ov5645->xclk, xclk_freq);
-	if (ret) {
-		dev_err(dev, "could not set xclk frequency\n");
-		return ret;
-	}
-
 	for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
 		ov5645->supplies[i].supply = ov5645_supply_name[i];