@@ -368,6 +368,26 @@ static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
return 0;
}
+static int cxusb_read_status(struct dvb_frontend *fe,
+ enum fe_status *status)
+{
+ struct dvb_usb_adapter *adap = (struct dvb_usb_adapter *)fe->dvb->priv;
+ struct cxusb_state *state = (struct cxusb_state *)adap->dev->priv;
+ int ret;
+
+ ret = state->fe_read_status(fe, status);
+
+ /* it need resync slave fifo when signal change from unlock to lock.*/
+ if ((*status & FE_HAS_LOCK) && (!state->last_lock)) {
+ mutex_lock(&state->stream_mutex);
+ cxusb_streaming_ctrl(adap, 1);
+ mutex_unlock(&state->stream_mutex);
+ }
+
+ state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
+ return ret;
+}
+
static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d)
{
int ep = d->props.generic_bulk_ctrl_endpoint;
@@ -1370,6 +1390,12 @@ static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap)
st->i2c_client_demod = client_demod;
st->i2c_client_tuner = client_tuner;
+ /* hook fe: need to resync the slave fifo when signal locks. */
+ mutex_init(&st->stream_mutex);
+ st->last_lock = 0;
+ st->fe_read_status = adap->fe_adap[0].fe->ops.read_status;
+ adap->fe_adap[0].fe->ops.read_status = cxusb_read_status;
+
return 0;
}
@@ -32,6 +32,11 @@ struct cxusb_state {
u8 gpio_write_state[3];
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
+
+ struct mutex stream_mutex;
+ u8 last_lock;
+ int (*fe_read_status)(struct dvb_frontend *fe,
+ enum fe_status *status);
};
#endif
This patch fix streaming issue for Geniatech T230/PT360. Signed-off-by: CrazyCat <crazycat69@narod.ru> --- drivers/media/usb/dvb-usb/cxusb.c | 26 ++++++++++++++++++++++++++ drivers/media/usb/dvb-usb/cxusb.h | 5 +++++ 2 files changed, 31 insertions(+)