@@ -15,9 +15,9 @@
#include <linux/sched.h>
#include <linux/wait.h>
#include <media/lirc.h>
+#include <media/lirc_dev.h>
#include <media/ir-core.h>
#include "ir-core-priv.h"
-#include "lirc_dev.h"
#define LIRCBUF_SIZE 256
@@ -37,7 +37,7 @@
#include <linux/cdev.h>
#include <media/lirc.h>
-#include "lirc_dev.h"
+#include <media/lirc_dev.h>
static int debug;
deleted file mode 100644
@@ -1,225 +0,0 @@
-/*
- * LIRC base driver
- *
- * by Artur Lipowski <alipowski@interia.pl>
- * This code is licensed under GNU GPL
- *
- */
-
-#ifndef _LINUX_LIRC_DEV_H
-#define _LINUX_LIRC_DEV_H
-
-#define MAX_IRCTL_DEVICES 4
-#define BUFLEN 16
-
-#define mod(n, div) ((n) % (div))
-
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/poll.h>
-#include <linux/kfifo.h>
-#include <media/lirc.h>
-
-struct lirc_buffer {
- wait_queue_head_t wait_poll;
- spinlock_t fifo_lock;
- unsigned int chunk_size;
- unsigned int size; /* in chunks */
- /* Using chunks instead of bytes pretends to simplify boundary checking
- * And should allow for some performance fine tunning later */
- struct kfifo fifo;
- u8 fifo_initialized;
-};
-
-static inline void lirc_buffer_clear(struct lirc_buffer *buf)
-{
- unsigned long flags;
-
- if (buf->fifo_initialized) {
- spin_lock_irqsave(&buf->fifo_lock, flags);
- kfifo_reset(&buf->fifo);
- spin_unlock_irqrestore(&buf->fifo_lock, flags);
- } else
- WARN(1, "calling %s on an uninitialized lirc_buffer\n",
- __func__);
-}
-
-static inline int lirc_buffer_init(struct lirc_buffer *buf,
- unsigned int chunk_size,
- unsigned int size)
-{
- int ret;
-
- init_waitqueue_head(&buf->wait_poll);
- spin_lock_init(&buf->fifo_lock);
- buf->chunk_size = chunk_size;
- buf->size = size;
- ret = kfifo_alloc(&buf->fifo, size * chunk_size, GFP_KERNEL);
- if (ret == 0)
- buf->fifo_initialized = 1;
-
- return ret;
-}
-
-static inline void lirc_buffer_free(struct lirc_buffer *buf)
-{
- if (buf->fifo_initialized) {
- kfifo_free(&buf->fifo);
- buf->fifo_initialized = 0;
- } else
- WARN(1, "calling %s on an uninitialized lirc_buffer\n",
- __func__);
-}
-
-static inline int lirc_buffer_len(struct lirc_buffer *buf)
-{
- int len;
- unsigned long flags;
-
- spin_lock_irqsave(&buf->fifo_lock, flags);
- len = kfifo_len(&buf->fifo);
- spin_unlock_irqrestore(&buf->fifo_lock, flags);
-
- return len;
-}
-
-static inline int lirc_buffer_full(struct lirc_buffer *buf)
-{
- return lirc_buffer_len(buf) == buf->size * buf->chunk_size;
-}
-
-static inline int lirc_buffer_empty(struct lirc_buffer *buf)
-{
- return !lirc_buffer_len(buf);
-}
-
-static inline int lirc_buffer_available(struct lirc_buffer *buf)
-{
- return buf->size - (lirc_buffer_len(buf) / buf->chunk_size);
-}
-
-static inline unsigned int lirc_buffer_read(struct lirc_buffer *buf,
- unsigned char *dest)
-{
- unsigned int ret = 0;
-
- if (lirc_buffer_len(buf) >= buf->chunk_size)
- ret = kfifo_out_locked(&buf->fifo, dest, buf->chunk_size,
- &buf->fifo_lock);
- return ret;
-
-}
-
-static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
- unsigned char *orig)
-{
- unsigned int ret;
-
- ret = kfifo_in_locked(&buf->fifo, orig, buf->chunk_size,
- &buf->fifo_lock);
-
- return ret;
-}
-
-struct lirc_driver {
- char name[40];
- int minor;
- unsigned long code_length;
- unsigned int buffer_size; /* in chunks holding one code each */
- int sample_rate;
- unsigned long features;
-
- unsigned int chunk_size;
-
- void *data;
- int min_timeout;
- int max_timeout;
- int (*add_to_buf) (void *data, struct lirc_buffer *buf);
- struct lirc_buffer *rbuf;
- int (*set_use_inc) (void *data);
- void (*set_use_dec) (void *data);
- struct file_operations *fops;
- struct device *dev;
- struct module *owner;
-};
-
-/* name:
- * this string will be used for logs
- *
- * minor:
- * indicates minor device (/dev/lirc) number for registered driver
- * if caller fills it with negative value, then the first free minor
- * number will be used (if available)
- *
- * code_length:
- * length of the remote control key code expressed in bits
- *
- * sample_rate:
- *
- * data:
- * it may point to any driver data and this pointer will be passed to
- * all callback functions
- *
- * add_to_buf:
- * add_to_buf will be called after specified period of the time or
- * triggered by the external event, this behavior depends on value of
- * the sample_rate this function will be called in user context. This
- * routine should return 0 if data was added to the buffer and
- * -ENODATA if none was available. This should add some number of bits
- * evenly divisible by code_length to the buffer
- *
- * rbuf:
- * if not NULL, it will be used as a read buffer, you will have to
- * write to the buffer by other means, like irq's (see also
- * lirc_serial.c).
- *
- * set_use_inc:
- * set_use_inc will be called after device is opened
- *
- * set_use_dec:
- * set_use_dec will be called after device is closed
- *
- * fops:
- * file_operations for drivers which don't fit the current driver model.
- *
- * Some ioctl's can be directly handled by lirc_dev if the driver's
- * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
- * lirc_serial.c).
- *
- * owner:
- * the module owning this struct
- *
- */
-
-
-/* following functions can be called ONLY from user context
- *
- * returns negative value on error or minor number
- * of the registered device if success
- * contents of the structure pointed by p is copied
- */
-extern int lirc_register_driver(struct lirc_driver *d);
-
-/* returns negative value on error or 0 if success
-*/
-extern int lirc_unregister_driver(int minor);
-
-/* Returns the private data stored in the lirc_driver
- * associated with the given device file pointer.
- */
-void *lirc_get_pdata(struct file *file);
-
-/* default file operations
- * used by drivers if they override only some operations
- */
-int lirc_dev_fop_open(struct inode *inode, struct file *file);
-int lirc_dev_fop_close(struct inode *inode, struct file *file);
-unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
-long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
- loff_t *ppos);
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
- loff_t *ppos);
-
-#endif
@@ -1,6 +1,6 @@
/*
* lirc.h - linux infrared remote control header file
- * last modified 2010/06/03 by Jarod Wilson
+ * last modified 2010/07/13 by Jarod Wilson
*/
#ifndef _LINUX_LIRC_H
@@ -33,6 +33,9 @@
#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+/* used heavily by lirc userspace */
+#define lirc_t int
+
/*** lirc compatible hardware features ***/
#define LIRC_MODE2SEND(x) (x)
@@ -95,12 +98,10 @@
#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
-#if 0 /* these ioctls are not used at the moment */
#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32)
#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32)
#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32)
#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32)
-#endif
/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
@@ -121,23 +122,30 @@
*/
#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32)
-#if 0 /* these ioctls are not used at the moment */
+/* 1 enables, 0 disables timeout reports in MODE2 */
+#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
+
/*
* pulses shorter than this are filtered out by hardware (software
* emulation in lirc_dev?)
*/
-#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x00000019, __u32)
+#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32)
/*
* spaces shorter than this are filtered out by hardware (software
* emulation in lirc_dev?)
*/
-#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001a, __u32)
+#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32)
/*
* if filter cannot be set independantly for pulse/space, this should
* be used
*/
-#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001b, __u32)
-#endif
+#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32)
+
+/*
+ * if enabled from the next key press on the driver will send
+ * LIRC_MODE2_FREQUENCY packets
+ */
+#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/*
* to set a range use
@@ -151,13 +159,7 @@
#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020)
-#if 0 /* these ioctls are not used at the moment */
-/*
- * from the next key press on the driver will send
- * LIRC_MODE2_FREQUENCY packets
- */
-#define LIRC_MEASURE_CARRIER_ENABLE _IO('i', 0x00000021)
-#define LIRC_MEASURE_CARRIER_DISABLE _IO('i', 0x00000022)
-#endif
+#define LIRC_SETUP_START _IO('i', 0x00000021)
+#define LIRC_SETUP_END _IO('i', 0x00000022)
#endif
new file mode 100644
@@ -0,0 +1,225 @@
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ * This code is licensed under GNU GPL
+ *
+ */
+
+#ifndef _LINUX_LIRC_DEV_H
+#define _LINUX_LIRC_DEV_H
+
+#define MAX_IRCTL_DEVICES 4
+#define BUFLEN 16
+
+#define mod(n, div) ((n) % (div))
+
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/kfifo.h>
+#include <media/lirc.h>
+
+struct lirc_buffer {
+ wait_queue_head_t wait_poll;
+ spinlock_t fifo_lock;
+ unsigned int chunk_size;
+ unsigned int size; /* in chunks */
+ /* Using chunks instead of bytes pretends to simplify boundary checking
+ * And should allow for some performance fine tunning later */
+ struct kfifo fifo;
+ u8 fifo_initialized;
+};
+
+static inline void lirc_buffer_clear(struct lirc_buffer *buf)
+{
+ unsigned long flags;
+
+ if (buf->fifo_initialized) {
+ spin_lock_irqsave(&buf->fifo_lock, flags);
+ kfifo_reset(&buf->fifo);
+ spin_unlock_irqrestore(&buf->fifo_lock, flags);
+ } else
+ WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+ __func__);
+}
+
+static inline int lirc_buffer_init(struct lirc_buffer *buf,
+ unsigned int chunk_size,
+ unsigned int size)
+{
+ int ret;
+
+ init_waitqueue_head(&buf->wait_poll);
+ spin_lock_init(&buf->fifo_lock);
+ buf->chunk_size = chunk_size;
+ buf->size = size;
+ ret = kfifo_alloc(&buf->fifo, size * chunk_size, GFP_KERNEL);
+ if (ret == 0)
+ buf->fifo_initialized = 1;
+
+ return ret;
+}
+
+static inline void lirc_buffer_free(struct lirc_buffer *buf)
+{
+ if (buf->fifo_initialized) {
+ kfifo_free(&buf->fifo);
+ buf->fifo_initialized = 0;
+ } else
+ WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+ __func__);
+}
+
+static inline int lirc_buffer_len(struct lirc_buffer *buf)
+{
+ int len;
+ unsigned long flags;
+
+ spin_lock_irqsave(&buf->fifo_lock, flags);
+ len = kfifo_len(&buf->fifo);
+ spin_unlock_irqrestore(&buf->fifo_lock, flags);
+
+ return len;
+}
+
+static inline int lirc_buffer_full(struct lirc_buffer *buf)
+{
+ return lirc_buffer_len(buf) == buf->size * buf->chunk_size;
+}
+
+static inline int lirc_buffer_empty(struct lirc_buffer *buf)
+{
+ return !lirc_buffer_len(buf);
+}
+
+static inline int lirc_buffer_available(struct lirc_buffer *buf)
+{
+ return buf->size - (lirc_buffer_len(buf) / buf->chunk_size);
+}
+
+static inline unsigned int lirc_buffer_read(struct lirc_buffer *buf,
+ unsigned char *dest)
+{
+ unsigned int ret = 0;
+
+ if (lirc_buffer_len(buf) >= buf->chunk_size)
+ ret = kfifo_out_locked(&buf->fifo, dest, buf->chunk_size,
+ &buf->fifo_lock);
+ return ret;
+
+}
+
+static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
+ unsigned char *orig)
+{
+ unsigned int ret;
+
+ ret = kfifo_in_locked(&buf->fifo, orig, buf->chunk_size,
+ &buf->fifo_lock);
+
+ return ret;
+}
+
+struct lirc_driver {
+ char name[40];
+ int minor;
+ unsigned long code_length;
+ unsigned int buffer_size; /* in chunks holding one code each */
+ int sample_rate;
+ unsigned long features;
+
+ unsigned int chunk_size;
+
+ void *data;
+ int min_timeout;
+ int max_timeout;
+ int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+ struct lirc_buffer *rbuf;
+ int (*set_use_inc) (void *data);
+ void (*set_use_dec) (void *data);
+ struct file_operations *fops;
+ struct device *dev;
+ struct module *owner;
+};
+
+/* name:
+ * this string will be used for logs
+ *
+ * minor:
+ * indicates minor device (/dev/lirc) number for registered driver
+ * if caller fills it with negative value, then the first free minor
+ * number will be used (if available)
+ *
+ * code_length:
+ * length of the remote control key code expressed in bits
+ *
+ * sample_rate:
+ *
+ * data:
+ * it may point to any driver data and this pointer will be passed to
+ * all callback functions
+ *
+ * add_to_buf:
+ * add_to_buf will be called after specified period of the time or
+ * triggered by the external event, this behavior depends on value of
+ * the sample_rate this function will be called in user context. This
+ * routine should return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ *
+ * rbuf:
+ * if not NULL, it will be used as a read buffer, you will have to
+ * write to the buffer by other means, like irq's (see also
+ * lirc_serial.c).
+ *
+ * set_use_inc:
+ * set_use_inc will be called after device is opened
+ *
+ * set_use_dec:
+ * set_use_dec will be called after device is closed
+ *
+ * fops:
+ * file_operations for drivers which don't fit the current driver model.
+ *
+ * Some ioctl's can be directly handled by lirc_dev if the driver's
+ * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
+ * lirc_serial.c).
+ *
+ * owner:
+ * the module owning this struct
+ *
+ */
+
+
+/* following functions can be called ONLY from user context
+ *
+ * returns negative value on error or minor number
+ * of the registered device if success
+ * contents of the structure pointed by p is copied
+ */
+extern int lirc_register_driver(struct lirc_driver *d);
+
+/* returns negative value on error or 0 if success
+*/
+extern int lirc_unregister_driver(int minor);
+
+/* Returns the private data stored in the lirc_driver
+ * associated with the given device file pointer.
+ */
+void *lirc_get_pdata(struct file *file);
+
+/* default file operations
+ * used by drivers if they override only some operations
+ */
+int lirc_dev_fop_open(struct inode *inode, struct file *file);
+int lirc_dev_fop_close(struct inode *inode, struct file *file);
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
+ loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
+ loff_t *ppos);
+
+#endif