@@ -155,5 +155,7 @@ source "drivers/staging/tidspbridge/Kconfig"
source "drivers/staging/quickstart/Kconfig"
+source "drivers/staging/lirc/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
@@ -58,3 +58,4 @@ obj-$(CONFIG_EASYCAP) += easycap/
obj-$(CONFIG_SOLO6X10) += solo6x10/
obj-$(CONFIG_TIDSPBRIDGE) += tidspbridge/
obj-$(CONFIG_ACPI_QUICKSTART) += quickstart/
+obj-$(CONFIG_LIRC_STAGING) += lirc/
new file mode 100644
@@ -0,0 +1,110 @@
+#
+# LIRC driver(s) configuration
+#
+menuconfig LIRC_STAGING
+ bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
+ help
+ Say Y here, and all supported Linux Infrared Remote Control IR and
+ RF receiver and transmitter drivers will be displayed. When paired
+ with a remote control and the lirc daemon, the receiver drivers
+ allow control of your Linux system via remote control.
+
+if LIRC_STAGING
+
+config LIRC_BT829
+ tristate "BT829 based hardware"
+ depends on LIRC_STAGING
+ help
+ Driver for the IR interface on BT829-based hardware
+
+config LIRC_ENE0100
+ tristate "ENE KB3924/ENE0100 CIR Port Reciever"
+ depends on LIRC_STAGING
+ help
+ This is a driver for CIR port handled by ENE KB3924 embedded
+ controller found on some notebooks.
+ It appears on PNP list as ENE0100.
+
+config LIRC_I2C
+ tristate "I2C Based IR Receivers"
+ depends on LIRC_STAGING
+ help
+ Driver for I2C-based IR receivers, such as those commonly
+ found onboard Hauppauge PVR-150/250/350 video capture cards
+
+config LIRC_IGORPLUGUSB
+ tristate "Igor Cesko's USB IR Receiver"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for Igor Cesko's USB IR Receiver
+
+config LIRC_IMON
+ tristate "Legacy SoundGraph iMON Receiver and Display"
+ depends on LIRC_STAGING
+ help
+ Driver for the original SoundGraph iMON IR Receiver and Display
+
+ Current generation iMON devices use the input layer imon driver.
+
+config LIRC_IT87
+ tristate "ITE IT87XX CIR Port Receiver"
+ depends on LIRC_STAGING
+ help
+ Driver for the ITE IT87xx IR Receiver
+
+config LIRC_ITE8709
+ tristate "ITE8709 CIR Port Receiver"
+ depends on LIRC_STAGING && PNP
+ help
+ Driver for the ITE8709 IR Receiver
+
+config LIRC_PARALLEL
+ tristate "Homebrew Parallel Port Receiver"
+ depends on LIRC_STAGING && !SMP
+ help
+ Driver for Homebrew Parallel Port Receivers
+
+config LIRC_SASEM
+ tristate "Sasem USB IR Remote"
+ depends on LIRC_STAGING
+ help
+ Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
+
+config LIRC_SERIAL
+ tristate "Homebrew Serial Port Receiver"
+ depends on LIRC_STAGING
+ help
+ Driver for Homebrew Serial Port Receivers
+
+config LIRC_SERIAL_TRANSMITTER
+ bool "Serial Port Transmitter"
+ default y
+ depends on LIRC_SERIAL
+ help
+ Serial Port Transmitter support
+
+config LIRC_SIR
+ tristate "Built-in SIR IrDA port"
+ depends on LIRC_STAGING
+ help
+ Driver for the SIR IrDA port
+
+config LIRC_STREAMZAP
+ tristate "Streamzap PC Receiver"
+ depends on LIRC_STAGING
+ help
+ Driver for the Streamzap PC Receiver
+
+config LIRC_TTUSBIR
+ tristate "Technotrend USB IR Receiver"
+ depends on LIRC_STAGING && USB
+ help
+ Driver for the Technotrend USB IR Receiver
+
+config LIRC_ZILOG
+ tristate "Zilog/Hauppauge IR Transmitter"
+ depends on LIRC_STAGING
+ help
+ Driver for the Zilog/Hauppauge IR Transmitter, found on
+ PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
+endif
new file mode 100644
@@ -0,0 +1,19 @@
+# Makefile for the lirc drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
+obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o
+obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o
+obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
+obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
+obj-$(CONFIG_LIRC_IT87) += lirc_it87.o
+obj-$(CONFIG_LIRC_ITE8709) += lirc_ite8709.o
+obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
+obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
+obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o
+obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
+obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o
+obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o
+obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
new file mode 100644
@@ -0,0 +1,8 @@
+- All drivers should either be ported to ir-core, or dropped entirely
+ (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an
+ example of a previously completed port).
+
+Please send patches to:
+Jarod Wilson <jarod@wilsonet.com>
+Greg Kroah-Hartman <greg@kroah.com>
+