diff -uprB v4l-dvb.orig/drivers/media/video/cx18/cx18-cards.c v4l-dvb/drivers/media/video/cx18/cx18-cards.c
--- v4l-dvb.orig/drivers/media/video/cx18/cx18-cards.c	2010-10-28 22:04:11.000000000 +0400
+++ v4l-dvb/drivers/media/video/cx18/cx18-cards.c	2010-10-29 00:31:53.000000000 +0400
@@ -251,6 +251,66 @@ static const struct cx18_card cx18_card_
 
 /* ------------------------------------------------------------------------- */
 
+/* GoTView PCI */
+
+static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_gotview_dvd3 = {
+	.type = CX18_CARD_GOTVIEW_PCI_DVD3,
+	.name = "GoTView PCI DVD3 Hybrid",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+				CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+	
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x2,
+			      .radio  = 0x1 },
+	.xceive_pin = 0,
+	.pci_list = cx18_pci_gotview_dvd3,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
 /* Conexant Raptor PAL/SECAM: note that this card is analog only! */
 
 static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
@@ -463,6 +523,7 @@ static const struct cx18_card *cx18_card
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
 	&cx18_card_leadtek_dvr3100h,
+	&cx18_card_gotview_dvd3
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff -uprB v4l-dvb.orig/drivers/media/video/cx18/cx18-driver.c v4l-dvb/drivers/media/video/cx18/cx18-driver.c
--- v4l-dvb.orig/drivers/media/video/cx18/cx18-driver.c	2010-10-28 22:04:11.000000000 +0400
+++ v4l-dvb/drivers/media/video/cx18/cx18-driver.c	2010-10-28 22:19:09.000000000 +0400
@@ -156,6 +156,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
 		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
 		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
+		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -333,6 +334,7 @@ void cx18_read_eeprom(struct cx18 *cx, s
 		tveeprom_hauppauge_analog(&c, tv, eedata);
 		break;
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 		tv->model = 0x718;
 		cx18_eeprom_dump(cx, eedata, sizeof(eedata));
 		CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
diff -uprB v4l-dvb.orig/drivers/media/video/cx18/cx18-driver.h v4l-dvb/drivers/media/video/cx18/cx18-driver.h
--- v4l-dvb.orig/drivers/media/video/cx18/cx18-driver.h	2010-10-28 22:04:11.000000000 +0400
+++ v4l-dvb/drivers/media/video/cx18/cx18-driver.h	2010-10-28 22:33:49.000000000 +0400
@@ -84,7 +84,8 @@
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
-#define CX18_CARD_LAST 		      7
+#define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
+#define CX18_CARD_LAST 		      8
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
@@ -106,6 +107,7 @@
 #define CX18_PCI_ID_CONEXANT		0x14f1
 #define CX18_PCI_ID_TOSHIBA		0x1179
 #define CX18_PCI_ID_LEADTEK		0x107D
+#define CX18_PCI_ID_GOTVIEW 		0x5854
 
 /* ======================================================================== */
 /* ========================== START USER SETTABLE DMA VARIABLES =========== */
diff -uprB v4l-dvb.orig/drivers/media/video/cx18/cx18-dvb.c v4l-dvb/drivers/media/video/cx18/cx18-dvb.c
--- v4l-dvb.orig/drivers/media/video/cx18/cx18-dvb.c	2010-10-28 22:04:11.000000000 +0400
+++ v4l-dvb/drivers/media/video/cx18/cx18-dvb.c	2010-10-28 22:20:08.000000000 +0400
@@ -203,6 +203,14 @@ static struct zl10353_config yuan_mpc718
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+static struct zl10353_config gotview_dvd3_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -247,6 +255,7 @@ static int cx18_dvb_start_feed(struct dv
 
 	case CX18_CARD_LEADTEK_DVR3100H:
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -495,6 +504,29 @@ static int dvb_register(struct cx18_stre
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &gotview_dvd3_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
