@@ -47,6 +47,7 @@
#define USB_BUFLEN 32 /* USB reception buffer length */
#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
+#define MS_TO_NS(msec) ((msec) * 1000)
/* MCE constants */
#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
@@ -90,6 +91,7 @@
#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
+#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */
#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
@@ -312,7 +314,10 @@ static struct usb_device_id mceusb_dev_table[] = {
struct mceusb_dev {
/* ir-core bits */
struct rc_dev *rc;
- struct ir_raw_event rawir;
+
+ /* optional features we can enable */
+ bool carrier_report_enabled;
+ bool learning_enabled;
/* core device bits */
struct device *dev;
@@ -326,6 +331,8 @@ struct mceusb_dev {
/* buffers and dma */
unsigned char *buf_in;
unsigned int len_in;
+ dma_addr_t dma_in;
+ dma_addr_t dma_out;
enum {
CMD_HEADER = 0,
@@ -333,10 +340,8 @@ struct mceusb_dev {
CMD_DATA,
PARSE_IRDATA,
} parser_state;
- u8 cmd, rem; /* Remaining IR data bytes in packet */
- dma_addr_t dma_in;
- dma_addr_t dma_out;
+ u8 cmd, rem; /* Remaining IR data bytes in packet */
struct {
u32 connected:1;
@@ -417,7 +422,7 @@ static int mceusb_cmdsize(u8 cmd, u8 subcmd)
case MCE_CMD_UNKNOWN:
case MCE_CMD_S_CARRIER:
case MCE_CMD_S_TIMEOUT:
- case MCE_CMD_G_RXSENSOR:
+ case MCE_RSP_PULSE_COUNT:
datasize = 2;
break;
case MCE_CMD_SIG_END:
@@ -538,10 +543,12 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
inout, data1 == 0x02 ? "short" : "long");
break;
case MCE_CMD_G_RXSENSOR:
- if (len == 2)
+ if (out)
dev_info(dev, "Get receive sensor\n");
- else
- dev_info(dev, "Remaining pulse count is %d\n",
+ break;
+ case MCE_RSP_PULSE_COUNT:
+ if (!out && ir->learning_enabled)
+ dev_info(dev, "RX pulse count: %d\n",
((data1 << 8) | data2));
break;
case MCE_RSP_CMD_INVALID:
@@ -795,6 +802,34 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
return carrier;
}
+/*
+ * We don't do anything but print debug spew for many of the command bits
+ * we receive from the hardware, but some of them are useful information
+ * we want to store so that we can use them.
+ */
+static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+{
+ u8 hi = ir->buf_in[index + 1] & 0xff;
+ u8 lo = ir->buf_in[index + 2] & 0xff;
+
+ switch (ir->buf_in[index]) {
+ /* 2-byte return value commands */
+ case MCE_CMD_S_TIMEOUT:
+ ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+ break;
+
+ /* 1-byte return value commands */
+ case MCE_CMD_S_TXMASK:
+ ir->tx_mask = hi;
+ break;
+ case MCE_CMD_S_RXSENSOR:
+ ir->learning_enabled = (hi == 0x02);
+ break;
+ default:
+ break;
+ }
+}
+
static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
{
DEFINE_IR_RAW_EVENT(rawir);
@@ -814,13 +849,14 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
mceusb_dev_printdata(ir, ir->buf_in, i - 1,
ir->rem + 2, false);
+ mceusb_handle_command(ir, i);
ir->parser_state = CMD_DATA;
break;
case PARSE_IRDATA:
ir->rem--;
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
- * MCE_TIME_UNIT * 1000;
+ * MS_TO_NS(MCE_TIME_UNIT);
dev_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
@@ -842,7 +878,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
continue;
}
ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
- mceusb_dev_printdata(ir, ir->buf_in, i, ir->rem + 1, false);
+ mceusb_dev_printdata(ir, ir->buf_in,
+ i, ir->rem + 1, false);
if (ir->rem)
ir->parser_state = PARSE_IRDATA;
break;