@@ -1,4 +1,6 @@
There a few things to do before putting this driver in production:
+ - IR NEC with tm5600/6000 TV cards
+ - IR RC5 with tm5600/6000/6010 TV cards
- CodingStyle;
- Fix audio;
- Fix some panic/OOPS conditions.
@@ -328,6 +328,47 @@ struct usb_device_id tm6000_id_table[] = {
{ },
};
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+ /* Power LED unconfigured */
+ if (!dev->gpio.power_led)
+ return;
+
+ /* ON Power LED */
+ if (state) {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ }
+ }
+ /* OFF Power LED */
+ else {
+ switch (dev->model) {
+ case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+ case TM6010_BOARD_TWINHAN_TU501:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x01);
+ break;
+ case TM6010_BOARD_BEHOLD_WANDER:
+ case TM6010_BOARD_BEHOLD_VOYAGER:
+ tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.power_led, 0x00);
+ break;
+ }
+ }
+}
+
/* Tuner callback to provide the proper gpio changes needed for xc5000 */
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
{
@@ -37,6 +37,10 @@ static unsigned int enable_ir = 1;
module_param(enable_ir, int, 0644);
MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+/* number of 50ms for ON-OFF-ON power led */
+/* show IR activity */
+#define PWLED_OFF 2
+
#undef dprintk
#define dprintk(fmt, arg...) \
@@ -59,6 +63,9 @@ struct tm6000_IR {
struct delayed_work work;
u8 wait:1;
u8 key:1;
+ u8 pwled:1;
+ u8 pwledcnt;
+ u16 key_addr;
struct urb *int_urb;
u8 *urb_data;
@@ -89,26 +96,49 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
u8 buf[10];
int rc;
- /* hack */
- buf[0] = 0xff;
- buf[1] = 0xff;
- buf[2] = 0xf2;
- buf[3] = 0x2b;
- buf[4] = 0x20;
- buf[5] = 0x35;
- buf[6] = 0x60;
- buf[7] = 0x04;
- buf[8] = 0xc0;
- buf[9] = 0x08;
-
- rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
- msleep(100);
-
- if (rc < 0) {
- printk(KERN_INFO "IR configuration failed");
- return rc;
+ switch (ir->rc_type) {
+ case RC_TYPE_NEC:
+ /* Setup IR decoder for NEC standard 12MHz system clock */
+ /* IR_LEADER_CNT = 0.9ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+ /* IR_PULSE_CNT = 0.7ms */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+ /* Remote WAKEUP = enable */
+ tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+ /* IR_WKUP_SEL = Low byte in decoded IR data */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+ /* IR_WKU_ADD code */
+ tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+ tm6000_flash_led(dev, 0);
+ msleep(100);
+ tm6000_flash_led(dev, 1);
+ break;
+ default:
+ /* hack */
+ buf[0] = 0xff;
+ buf[1] = 0xff;
+ buf[2] = 0xf2;
+ buf[3] = 0x2b;
+ buf[4] = 0x20;
+ buf[5] = 0x35;
+ buf[6] = 0x60;
+ buf[7] = 0x04;
+ buf[8] = 0xc0;
+ buf[9] = 0x08;
+
+ rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+ msleep(100);
+
+ if (rc < 0) {
+ printk(KERN_INFO "IR configuration failed");
+ return rc;
+ }
+ break;
}
+
return 0;
}
@@ -143,10 +173,21 @@ static int default_polling_getkey(struct tm6000_IR *ir,
return 0;
if (&dev->int_in) {
- if (ir->rc_type == RC_TYPE_RC5)
+ switch (ir->rc_type) {
+ case RC_TYPE_RC5:
poll_result->rc_data = ir->urb_data[0];
- else
- poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
+ break;
+ case RC_TYPE_NEC:
+ if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ }
+ break;
+ default:
+ poll_result->rc_data = ir->urb_data[0]
+ | ir->urb_data[1] << 8;
+ break;
+ }
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
@@ -186,6 +227,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
static void tm6000_ir_handle_key(struct tm6000_IR *ir)
{
+ struct tm6000_core *dev = ir->dev;
int result;
struct tm6000_ir_poll_result poll_result;
@@ -198,9 +240,21 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
+ if (ir->pwled) {
+ if (ir->pwledcnt >= PWLED_OFF) {
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 1);
+ } else
+ ir->pwledcnt += 1;
+ }
+
if (ir->key) {
rc_keydown(ir->rc, poll_result.rc_data, 0);
ir->key = 0;
+ ir->pwled = 1;
+ ir->pwledcnt = 0;
+ tm6000_flash_led(dev, 0);
}
return;
}
@@ -234,19 +288,80 @@ int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
{
struct tm6000_IR *ir = rc->priv;
+ if (!ir)
+ return 0;
+
+ if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+ ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
ir->get_key = default_polling_getkey;
+ ir->rc_type = rc_type;
tm6000_ir_config(ir);
/* TODO */
return 0;
}
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+ int pipe, size;
+ int err = -ENOMEM;
+
+
+ if (!ir)
+ return -ENODEV;
+
+ ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+ pipe = usb_rcvintpipe(dev->udev,
+ dev->int_in.endp->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+ dprintk("IR max size: %d\n", size);
+
+ ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+ if (ir->int_urb->transfer_buffer == NULL) {
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+ usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+ ir->int_urb->transfer_buffer, size,
+ tm6000_ir_urb_received, dev,
+ dev->int_in.endp->desc.bInterval);
+ err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+ if (err) {
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ return err;
+ }
+ ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+ return 0;
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+ struct tm6000_IR *ir = dev->ir;
+
+ if (!ir)
+ return;
+
+ usb_kill_urb(ir->int_urb);
+ kfree(ir->int_urb->transfer_buffer);
+ usb_free_urb(ir->int_urb);
+ ir->int_urb = NULL;
+ kfree(ir->urb_data);
+ ir->urb_data = NULL;
+}
+
int tm6000_ir_init(struct tm6000_core *dev)
{
struct tm6000_IR *ir;
struct rc_dev *rc;
int err = -ENOMEM;
- int pipe, size;
if (!enable_ir)
return -ENODEV;
@@ -276,6 +391,9 @@ int tm6000_ir_init(struct tm6000_core *dev)
rc->driver_type = RC_DRIVER_SCANCODE;
ir->polling = 50;
+ ir->pwled = 0;
+ ir->pwledcnt = 0;
+
snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
dev->name);
@@ -298,32 +416,10 @@ int tm6000_ir_init(struct tm6000_core *dev)
if (&dev->int_in) {
dprintk("IR over int\n");
- ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-
- pipe = usb_rcvintpipe(dev->udev,
- dev->int_in.endp->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
+ err = tm6000_ir_int_start(dev);
- size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
- dprintk("IR max size: %d\n", size);
-
- ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
- if (ir->int_urb->transfer_buffer == NULL) {
- usb_free_urb(ir->int_urb);
- goto out;
- }
- dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
- usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
- ir->int_urb->transfer_buffer, size,
- tm6000_ir_urb_received, dev,
- dev->int_in.endp->desc.bInterval);
- err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
- if (err) {
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
+ if (err)
goto out;
- }
- ir->urb_data = kzalloc(size, GFP_KERNEL);
}
/* ir register */
@@ -352,12 +448,7 @@ int tm6000_ir_fini(struct tm6000_core *dev)
rc_unregister_device(ir->rc);
if (ir->int_urb) {
- usb_kill_urb(ir->int_urb);
- kfree(ir->int_urb->transfer_buffer);
- usb_free_urb(ir->int_urb);
- ir->int_urb = NULL;
- kfree(ir->urb_data);
- ir->urb_data = NULL;
+ tm6000_ir_int_stop(dev);
}
kfree(ir);
@@ -545,11 +545,16 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
/* De-allocates all pending stuff */
tm6000_uninit_isoc(dev);
+ /* Stop interrupt USB pipe */
+ tm6000_ir_int_stop(dev);
usb_set_interface(dev->udev,
dev->isoc_in.bInterfaceNumber,
dev->isoc_in.bAlternateSetting);
+ /* Start interrupt USB pipe */
+ tm6000_ir_int_start(dev);
+
pipe = usb_rcvisocpipe(dev->udev,
dev->isoc_in.endp->desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK);
@@ -266,6 +266,7 @@ struct tm6000_fh {
int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
/* In tm6000-core.c */
@@ -332,6 +333,8 @@ int tm6000_queue_init(struct tm6000_core *dev);
int tm6000_ir_init(struct tm6000_core *dev);
int tm6000_ir_fini(struct tm6000_core *dev);
void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
/* Debug stuff */
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>