Message ID | 201105182335.25161.linux@rainbow-software.org (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On Wednesday, May 18, 2011 23:35:22 Ondrej Zary wrote: > Convert tea575x-tuner to use the new V4L2 control framework. Also add > ext_init() callback that can be used by a card driver for additional > initialization right before registering the video device (for SF16-FMR2). > > Also embed struct video_device to struct snd_tea575x to simplify the code. > > Signed-off-by: Ondrej Zary <linux@rainbow-software.org> > > --- linux-2.6.39-rc2-/include/sound/tea575x-tuner.h 2011-05-13 19:39:23.000000000 +0200 > +++ linux-2.6.39-rc2/include/sound/tea575x-tuner.h 2011-05-18 23:14:48.000000000 +0200 > @@ -23,8 +23,8 @@ > */ > > #include <linux/videodev2.h> > +#include <media/v4l2-ctrls.h> > #include <media/v4l2-dev.h> > -#include <media/v4l2-ioctl.h> > > #define TEA575X_FMIF 10700 > > @@ -42,7 +42,8 @@ struct snd_tea575x_ops { > }; > > struct snd_tea575x { > - struct video_device *vd; /* video device */ > + struct video_device vd; /* video device */ > + bool initialized; This isn't needed, more about that below. > bool tea5759; /* 5759 chip is present */ > bool mute; /* Device is muted? */ > bool stereo; /* receiving stereo */ > @@ -54,6 +55,8 @@ struct snd_tea575x { > void *private_data; > u8 card[32]; > u8 bus_info[32]; > + struct v4l2_ctrl_handler ctrl_handler; > + void (*ext_init)(struct snd_tea575x *tea); ext_init should return int to pass back errors. > }; > > int snd_tea575x_init(struct snd_tea575x *tea); > --- linux-2.6.39-rc2-/sound/i2c/other/tea575x-tuner.c 2011-05-13 19:39:23.000000000 +0200 > +++ linux-2.6.39-rc2/sound/i2c/other/tea575x-tuner.c 2011-05-18 23:22:44.000000000 +0200 > @@ -22,11 +22,11 @@ > > #include <asm/io.h> > #include <linux/delay.h> > -#include <linux/interrupt.h> > #include <linux/init.h> > #include <linux/slab.h> > #include <linux/version.h> > -#include <sound/core.h> > +#include <media/v4l2-dev.h> > +#include <media/v4l2-ioctl.h> > #include <sound/tea575x-tuner.h> > > MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); > @@ -62,17 +62,6 @@ module_param(radio_nr, int, 0); > #define TEA575X_BIT_DUMMY (1<<15) /* buffer */ > #define TEA575X_BIT_FREQ_MASK 0x7fff > > -static struct v4l2_queryctrl radio_qctrl[] = { > - { > - .id = V4L2_CID_AUDIO_MUTE, > - .name = "Mute", > - .minimum = 0, > - .maximum = 1, > - .default_value = 1, > - .type = V4L2_CTRL_TYPE_BOOLEAN, > - } > -}; > - > /* > * lowlevel part > */ > @@ -266,47 +255,17 @@ static int vidioc_s_audio(struct file *f > return 0; > } > > -static int vidioc_queryctrl(struct file *file, void *priv, > - struct v4l2_queryctrl *qc) > -{ > - int i; > - > - for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { > - if (qc->id && qc->id == radio_qctrl[i].id) { > - memcpy(qc, &(radio_qctrl[i]), > - sizeof(*qc)); > - return 0; > - } > - } > - return -EINVAL; > -} > - > -static int vidioc_g_ctrl(struct file *file, void *priv, > - struct v4l2_control *ctrl) > +static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl) > { > - struct snd_tea575x *tea = video_drvdata(file); > + struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler); > > switch (ctrl->id) { > case V4L2_CID_AUDIO_MUTE: > - ctrl->value = tea->mute; > + tea->mute = ctrl->val; > + snd_tea575x_set_freq(tea); > return 0; > } > - return -EINVAL; > -} > - > -static int vidioc_s_ctrl(struct file *file, void *priv, > - struct v4l2_control *ctrl) > -{ > - struct snd_tea575x *tea = video_drvdata(file); > > - switch (ctrl->id) { > - case V4L2_CID_AUDIO_MUTE: > - if (tea->mute != ctrl->value) { > - tea->mute = ctrl->value; > - snd_tea575x_set_freq(tea); > - } > - return 0; > - } > return -EINVAL; > } > > @@ -355,16 +314,17 @@ static const struct v4l2_ioctl_ops tea57 > .vidioc_s_input = vidioc_s_input, > .vidioc_g_frequency = vidioc_g_frequency, > .vidioc_s_frequency = vidioc_s_frequency, > - .vidioc_queryctrl = vidioc_queryctrl, > - .vidioc_g_ctrl = vidioc_g_ctrl, > - .vidioc_s_ctrl = vidioc_s_ctrl, > }; > > static struct video_device tea575x_radio = { > .name = "tea575x-tuner", > .fops = &tea575x_fops, > .ioctl_ops = &tea575x_ioctl_ops, > - .release = video_device_release, > + .release = video_device_release_empty, > +}; > + > +static const struct v4l2_ctrl_ops tea575x_ctrl_ops = { > + .s_ctrl = tea575x_s_ctrl, > }; > > /* > @@ -373,7 +333,6 @@ static struct video_device tea575x_radio > int snd_tea575x_init(struct snd_tea575x *tea) > { > int retval; > - struct video_device *tea575x_radio_inst; > > tea->mute = 1; > > @@ -384,39 +343,44 @@ int snd_tea575x_init(struct snd_tea575x > tea->in_use = 0; > tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40; > tea->freq = 90500 * 16; /* 90.5Mhz default */ > + snd_tea575x_set_freq(tea); > > - tea575x_radio_inst = video_device_alloc(); > - if (tea575x_radio_inst == NULL) { > - printk(KERN_ERR "tea575x-tuner: not enough memory\n"); > - return -ENOMEM; > - } > + memcpy(&tea->vd, &tea575x_radio, sizeof(tea575x_radio)); You can use tea->vd = tea575x_radio instead of memcpy. > + video_set_drvdata(&tea->vd, tea); > > - memcpy(tea575x_radio_inst, &tea575x_radio, sizeof(tea575x_radio)); > + v4l2_ctrl_handler_init(&tea->ctrl_handler, 1); > + tea->vd.ctrl_handler = &tea->ctrl_handler; > + v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); > + retval = tea->ctrl_handler.error; > + if (retval) { > + printk(KERN_ERR "tea575x-tuner: can't initialize controls\n"); > + v4l2_ctrl_handler_free(&tea->ctrl_handler); > + return retval; > + } > + v4l2_ctrl_handler_setup(&tea->ctrl_handler); It's better to move this after the ext_init call, then the driver implementing ext_init doesn't have to call v4l2_ctrl_handler_setup again. > > - strcpy(tea575x_radio.name, tea->tea5759 ? > - "TEA5759 radio" : "TEA5757 radio"); > + if (tea->ext_init) > + tea->ext_init(tea); ext_init can return an error. In particular, radio-sf16fmr2 should return tea->ctrl_handler.error after adding the two new controls since adding those controls might have failed. > > - video_set_drvdata(tea575x_radio_inst, tea); > + tea->initialized = 1; > > - retval = video_register_device(tea575x_radio_inst, > - VFL_TYPE_RADIO, radio_nr); > + retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, radio_nr); > if (retval) { > printk(KERN_ERR "tea575x-tuner: can't register video device!\n"); > - kfree(tea575x_radio_inst); > + v4l2_ctrl_handler_free(&tea->ctrl_handler); > + tea->initialized = 0; > return retval; > } > > - snd_tea575x_set_freq(tea); > - tea->vd = tea575x_radio_inst; > - > return 0; > } > > void snd_tea575x_exit(struct snd_tea575x *tea) > { > - if (tea->vd) { > - video_unregister_device(tea->vd); > - tea->vd = NULL; > + if (tea->initialized) { > + video_unregister_device(&tea->vd); video_unregister_device is smart enough to detect a failed video_register_device call, so there is no need to use this 'initialized' field. > + v4l2_ctrl_handler_free(&tea->ctrl_handler); > + tea->initialized = 0; > } > } > > > > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- linux-2.6.39-rc2-/include/sound/tea575x-tuner.h 2011-05-13 19:39:23.000000000 +0200 +++ linux-2.6.39-rc2/include/sound/tea575x-tuner.h 2011-05-18 23:14:48.000000000 +0200 @@ -23,8 +23,8 @@ */ #include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> -#include <media/v4l2-ioctl.h> #define TEA575X_FMIF 10700 @@ -42,7 +42,8 @@ struct snd_tea575x_ops { }; struct snd_tea575x { - struct video_device *vd; /* video device */ + struct video_device vd; /* video device */ + bool initialized; bool tea5759; /* 5759 chip is present */ bool mute; /* Device is muted? */ bool stereo; /* receiving stereo */ @@ -54,6 +55,8 @@ struct snd_tea575x { void *private_data; u8 card[32]; u8 bus_info[32]; + struct v4l2_ctrl_handler ctrl_handler; + void (*ext_init)(struct snd_tea575x *tea); }; int snd_tea575x_init(struct snd_tea575x *tea); --- linux-2.6.39-rc2-/sound/i2c/other/tea575x-tuner.c 2011-05-13 19:39:23.000000000 +0200 +++ linux-2.6.39-rc2/sound/i2c/other/tea575x-tuner.c 2011-05-18 23:22:44.000000000 +0200 @@ -22,11 +22,11 @@ #include <asm/io.h> #include <linux/delay.h> -#include <linux/interrupt.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/version.h> -#include <sound/core.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> #include <sound/tea575x-tuner.h> MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>"); @@ -62,17 +62,6 @@ module_param(radio_nr, int, 0); #define TEA575X_BIT_DUMMY (1<<15) /* buffer */ #define TEA575X_BIT_FREQ_MASK 0x7fff -static struct v4l2_queryctrl radio_qctrl[] = { - { - .id = V4L2_CID_AUDIO_MUTE, - .name = "Mute", - .minimum = 0, - .maximum = 1, - .default_value = 1, - .type = V4L2_CTRL_TYPE_BOOLEAN, - } -}; - /* * lowlevel part */ @@ -266,47 +255,17 @@ static int vidioc_s_audio(struct file *f return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { - if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), - sizeof(*qc)); - return 0; - } - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl) { - struct snd_tea575x *tea = video_drvdata(file); + struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: - ctrl->value = tea->mute; + tea->mute = ctrl->val; + snd_tea575x_set_freq(tea); return 0; } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct snd_tea575x *tea = video_drvdata(file); - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (tea->mute != ctrl->value) { - tea->mute = ctrl->value; - snd_tea575x_set_freq(tea); - } - return 0; - } return -EINVAL; } @@ -355,16 +314,17 @@ static const struct v4l2_ioctl_ops tea57 .vidioc_s_input = vidioc_s_input, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, }; static struct video_device tea575x_radio = { .name = "tea575x-tuner", .fops = &tea575x_fops, .ioctl_ops = &tea575x_ioctl_ops, - .release = video_device_release, + .release = video_device_release_empty, +}; + +static const struct v4l2_ctrl_ops tea575x_ctrl_ops = { + .s_ctrl = tea575x_s_ctrl, }; /* @@ -373,7 +333,6 @@ static struct video_device tea575x_radio int snd_tea575x_init(struct snd_tea575x *tea) { int retval; - struct video_device *tea575x_radio_inst; tea->mute = 1; @@ -384,39 +343,44 @@ int snd_tea575x_init(struct snd_tea575x tea->in_use = 0; tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40; tea->freq = 90500 * 16; /* 90.5Mhz default */ + snd_tea575x_set_freq(tea); - tea575x_radio_inst = video_device_alloc(); - if (tea575x_radio_inst == NULL) { - printk(KERN_ERR "tea575x-tuner: not enough memory\n"); - return -ENOMEM; - } + memcpy(&tea->vd, &tea575x_radio, sizeof(tea575x_radio)); + video_set_drvdata(&tea->vd, tea); - memcpy(tea575x_radio_inst, &tea575x_radio, sizeof(tea575x_radio)); + v4l2_ctrl_handler_init(&tea->ctrl_handler, 1); + tea->vd.ctrl_handler = &tea->ctrl_handler; + v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + retval = tea->ctrl_handler.error; + if (retval) { + printk(KERN_ERR "tea575x-tuner: can't initialize controls\n"); + v4l2_ctrl_handler_free(&tea->ctrl_handler); + return retval; + } + v4l2_ctrl_handler_setup(&tea->ctrl_handler); - strcpy(tea575x_radio.name, tea->tea5759 ? - "TEA5759 radio" : "TEA5757 radio"); + if (tea->ext_init) + tea->ext_init(tea); - video_set_drvdata(tea575x_radio_inst, tea); + tea->initialized = 1; - retval = video_register_device(tea575x_radio_inst, - VFL_TYPE_RADIO, radio_nr); + retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, radio_nr); if (retval) { printk(KERN_ERR "tea575x-tuner: can't register video device!\n"); - kfree(tea575x_radio_inst); + v4l2_ctrl_handler_free(&tea->ctrl_handler); + tea->initialized = 0; return retval; } - snd_tea575x_set_freq(tea); - tea->vd = tea575x_radio_inst; - return 0; } void snd_tea575x_exit(struct snd_tea575x *tea) { - if (tea->vd) { - video_unregister_device(tea->vd); - tea->vd = NULL; + if (tea->initialized) { + video_unregister_device(&tea->vd); + v4l2_ctrl_handler_free(&tea->ctrl_handler); + tea->initialized = 0; } }
Convert tea575x-tuner to use the new V4L2 control framework. Also add ext_init() callback that can be used by a card driver for additional initialization right before registering the video device (for SF16-FMR2). Also embed struct video_device to struct snd_tea575x to simplify the code. Signed-off-by: Ondrej Zary <linux@rainbow-software.org>