@@ -1113,17 +1113,19 @@ EXPORT_SYMBOL_GPL(em28xx_init_isoc);
int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
{
unsigned int chip_cfg2;
- unsigned int packet_size = 564;
+ unsigned int packet_size;
- if (dev->chip_id == CHIP_ID_EM2874) {
- /* FIXME - for now assume 564 like it was before, but the
- em2874 code should be added to return the proper value... */
- packet_size = 564;
- } else if (dev->chip_id == CHIP_ID_EM28174 || dev->chip_id == CHIP_ID_EM2884) {
- /* FIXME same as em2874. 564 was enough for 22 Mbit DVB-T
- but too much for 44 Mbit DVB-C. */
- packet_size = 752;
- } else {
+ switch (dev->chip_id) {
+ case CHIP_ID_EM2710:
+ case CHIP_ID_EM2750:
+ case CHIP_ID_EM2800:
+ case CHIP_ID_EM2820:
+ case CHIP_ID_EM2840:
+ case CHIP_ID_EM2860:
+ /* No DVB support */
+ return -EINVAL;
+ case CHIP_ID_EM2870:
+ case CHIP_ID_EM2883:
/* TS max packet size stored in bits 1-0 of R01 */
chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
@@ -1140,9 +1142,24 @@ int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
packet_size = 752;
break;
}
+ break;
+ case CHIP_ID_EM2874:
+ /*
+ * FIXME: for now assumes 564 like it was before, but the
+ * em2874 code should be added to return the proper value
+ */
+ packet_size = 564;
+ break;
+ case CHIP_ID_EM2884:
+ case CHIP_ID_EM28174:
+ default:
+ /*
+ * FIXME: same as em2874. 564 was enough for 22 Mbit DVB-T
+ * but not enough for 44 Mbit DVB-C.
+ */
+ packet_size = 752;
}
- em28xx_coredbg("dvb max packet size=%d\n", packet_size);
return packet_size;
}
EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
@@ -167,6 +167,11 @@ static int start_streaming(struct em28xx_dvb *dvb)
return rc;
max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev);
+ if (max_dvb_packet_size < 0)
+ return max_dvb_packet_size;
+ dprintk(1, "Using %d buffers each with %d bytes\n",
+ EM28XX_DVB_NUM_BUFS,
+ max_dvb_packet_size);
return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
The logic at em28xx_isoc_dvb_max_packetsize() sucks, at least for newer chips: it just returns a magic number. There's no code there to guess the needed packet size. Yet, it is better than nothing. Rewrite the code in order to change the default to 752 for em2884 and newer chips and provide a better way to handle per-chipset specifics. For em2874, the current default should be enough, as the only em2874 board is currently a 1-seg ISDB-T board, so, it needs only a limited amount of bandwidth. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>