@@ -30,6 +30,7 @@
#include "tda826x.h"
#include "tda10086.h"
#include "tda1002x.h"
+#include "tda10048.h"
#include "tda827x.h"
#include "lnbp21.h"
@@ -82,7 +83,7 @@
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
static u8 obuf[60], ibuf[60];
- int i,read;
+ int i, write_read, read;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
@@ -91,28 +92,35 @@
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) {
- read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+ write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+ read = msg[i].flags & I2C_M_RD;
- obuf[0] = (msg[i].addr << 1) | read;
- obuf[1] = msg[i].len;
+ obuf[0] = (msg[i].addr << 1) | (write_read | read);
+ if (read)
+ obuf[1] = 0;
+ else
+ obuf[1] = msg[i].len;
/* read request */
- if (read)
+ if (write_read)
obuf[2] = msg[i+1].len;
+ else if (read)
+ obuf[2] = msg[i].len;
else
obuf[2] = 0;
- memcpy(&obuf[3],msg[i].buf,msg[i].len);
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
err("i2c transfer failed.");
break;
}
- if (read) {
- memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
+ if (write_read) {
+ memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len);
i++;
- }
+ } else if (read)
+ memcpy(msg[i].buf, &ibuf[3], msg[i].len);
}
mutex_unlock(&d->i2c_mutex);
@@ -190,6 +198,25 @@
.deltaf = 0xa511,
};
+static struct tda10048_config tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_4000,
+ .dtv7_if_freq_khz = TDA10048_IF_4500,
+ .dtv8_if_freq_khz = TDA10048_IF_5000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .no_firmware = 1,
+ .set_pll = true ,
+ .pll_m = 5,
+ .pll_n = 3,
+ .pll_p = 0,
+};
+
+static struct tda827x_config tda827x_config = {
+ .config = 3,
+};
+
static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev,0,3) < 0)
@@ -203,20 +230,71 @@
return 0;
}
+static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+ return adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], enable);
+}
+
+static int ttusb2_tuner_callback(void *priv, int component, int cmd, int enable)
+{
+ struct dvb_usb_device *d = priv;
+ u8 b[2];
+
+
+ b[0] = 0x02;
+ b[1] = enable ? 0 : 1;
+
+ return ttusb2_msg(d, 0x03, b, 2, NULL, 0);
+}
+
static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
err("set interface to alts=3 failed");
- if ((adap->fe[0] = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
- deb_info("TDA10023 attach failed\n");
- return -ENODEV;
+
+ if (adap->fe[0] == NULL) {
+ /* FE 0 DVB-C */
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &tda10023_config, &adap->dev->i2c_adap, 0x48);
+
+ if (adap->fe[0] == NULL) {
+ deb_info("TDA10023 attach failed\n");
+ return -ENODEV;
+ }
+ adap->dev->i2c_adap.algo_data = adap->dev;
+ adap->fe[0]->callback = ttusb2_tuner_callback;
+ } else {
+ adap->fe[1] = dvb_attach(tda10048_attach,
+ &tda10048_config, &adap->dev->i2c_adap);
+
+ if (adap->fe[1] == NULL) {
+ deb_info("TDA10048 attach failed\n");
+ return -ENODEV;
+ }
+
+ /* tuner is behind TDA10023 I2C-gate */
+ adap->fe[1]->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl;
+ adap->fe[1]->callback = ttusb2_tuner_callback;
+
}
+
return 0;
}
static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
{
- if (dvb_attach(tda827x_attach, adap->fe[0], 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
+ struct dvb_frontend *fe;
+
+ /* MFE: select correct FE to attach tuner since that's called twice */
+ if (adap->fe[1] == NULL)
+ fe = adap->fe[0];
+ else
+ fe = adap->fe[1];
+
+ /* attach tuner */
+ if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
printk(KERN_ERR "%s: No tda827x found!\n", __func__);
return -ENODEV;
}
@@ -385,6 +463,7 @@
{
.streaming_ctrl = NULL,
+ .num_frontends = 2,
.frontend_attach = ttusb2_frontend_tda10023_attach,
.tuner_attach = ttusb2_tuner_tda827x_attach,
@@ -206,15 +206,16 @@
static struct pll_tab {
u32 clk_freq_khz;
u32 if_freq_khz;
- u8 m, n, p;
} pll_tab[] = {
- { TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 },
- { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
+ { TDA10048_CLK_4000, TDA10048_IF_36130 },
+ { TDA10048_CLK_16000, TDA10048_IF_3300 },
+ { TDA10048_CLK_16000, TDA10048_IF_3500 },
+ { TDA10048_CLK_16000, TDA10048_IF_3800 },
+ { TDA10048_CLK_16000, TDA10048_IF_4000 },
+ { TDA10048_CLK_16000, TDA10048_IF_4300 },
+ { TDA10048_CLK_16000, TDA10048_IF_4500 },
+ { TDA10048_CLK_16000, TDA10048_IF_5000 },
+ { TDA10048_CLK_16000, TDA10048_IF_36130 },
};
static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
@@ -460,9 +461,6 @@
state->freq_if_hz = pll_tab[i].if_freq_khz * 1000;
state->xtal_hz = pll_tab[i].clk_freq_khz * 1000;
- state->pll_mfactor = pll_tab[i].m;
- state->pll_nfactor = pll_tab[i].n;
- state->pll_pfactor = pll_tab[i].p;
break;
}
}
@@ -781,6 +779,10 @@
dprintk(1, "%s()\n", __func__);
+ /* PLL */
+ init_tab[4].data = (u8)(state->pll_mfactor);
+ init_tab[5].data = (u8)(state->pll_nfactor) | 0x40;
+
/* Apply register defaults */
for (i = 0; i < ARRAY_SIZE(init_tab); i++)
tda10048_writereg(state, init_tab[i].reg, init_tab[i].data);
@@ -1123,7 +1125,7 @@
/* setup the state and clone the config */
memcpy(&state->config, config, sizeof(*config));
state->i2c = i2c;
- state->fwloaded = 0;
+ state->fwloaded = config->no_firmware;
state->bandwidth = BANDWIDTH_8_MHZ;
/* check if the demod is present */
@@ -1135,6 +1137,17 @@
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+ /* set pll */
+ if (config->set_pll) {
+ state->pll_mfactor = config->pll_m;
+ state->pll_nfactor = config->pll_n;
+ state->pll_pfactor = config->pll_p;
+ } else {
+ state->pll_mfactor = 10;
+ state->pll_nfactor = 3;
+ state->pll_pfactor = 0;
+ }
+
/* Establish any defaults the the user didn't pass */
tda10048_establish_defaults(&state->frontend);
@@ -51,6 +51,7 @@
#define TDA10048_IF_4300 4300
#define TDA10048_IF_4500 4500
#define TDA10048_IF_4750 4750
+#define TDA10048_IF_5000 5000
#define TDA10048_IF_36130 36130
u16 dtv6_if_freq_khz;
u16 dtv7_if_freq_khz;
@@ -62,6 +63,13 @@
/* Disable I2C gate access */
u8 disable_gate_access;
+
+ bool no_firmware;
+
+ bool set_pll;
+ u8 pll_m;
+ u8 pll_p;
+ u8 pll_n;
};
#if defined(CONFIG_DVB_TDA10048) || \