From patchwork Mon Aug 8 10:35:35 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jose Alberto Reguero X-Patchwork-Id: 1043662 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.4) with ESMTP id p78AZqYs023372 for ; Mon, 8 Aug 2011 10:35:52 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752243Ab1HHKft (ORCPT ); Mon, 8 Aug 2011 06:35:49 -0400 Received: from impaqm1.telefonica.net ([213.4.138.17]:61590 "EHLO telefonica.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751725Ab1HHKfs (ORCPT ); Mon, 8 Aug 2011 06:35:48 -0400 Received: from IMPmailhost1.adm.correo ([10.20.102.38]) by IMPaqm1.telefonica.net with bizsmtp id HliZ1h00V0piX6q01mbjpA; Mon, 08 Aug 2011 12:35:43 +0200 Received: from jar7.dominio ([77.209.217.56]) by IMPmailhost1.adm.correo with BIZ IMP id Hmbf1h00B1Dbk9p1hmbf9Z; Mon, 08 Aug 2011 12:35:42 +0200 X-Brightmail-Tracker: AAAAAA== X-original-sender: jareguero@telefonica.net From: Jose Alberto Reguero To: Antti Palosaari Subject: Re: [PATCH] add support for the dvb-t part of CT-3650 v3 Date: Mon, 8 Aug 2011 12:35:35 +0200 User-Agent: KMail/1.13.7 (Linux/2.6.38.8-32.fc15.x86_64; KDE/4.6.5; x86_64; ; ) Cc: Mauro Carvalho Chehab , linux-media@vger.kernel.org, Michael Krufky , Guy Martin References: <201106070205.08118.jareguero@telefonica.net> <201107282125.02695.jareguero@telefonica.net> <201108022121.14355.jareguero@telefonica.net> In-Reply-To: <201108022121.14355.jareguero@telefonica.net> MIME-Version: 1.0 Message-Id: <201108081235.35950.jareguero@telefonica.net> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Mon, 08 Aug 2011 10:35:54 +0000 (UTC) On Martes, 2 de Agosto de 2011 21:21:13 Jose Alberto Reguero escribió: > On Jueves, 28 de Julio de 2011 21:25:01 Jose Alberto Reguero escribió: > > On Miércoles, 27 de Julio de 2011 21:22:26 Antti Palosaari escribió: > > > On 07/24/2011 12:45 AM, Jose Alberto Reguero wrote: > > > > Read without write work as with write. Attached updated patch. > > > > > > > > ttusb2-6.diff > > > > > > > > - read = i+1< num&& (msg[i+1].flags& I2C_M_RD); > > > > + write_read = i+1< num&& (msg[i+1].flags& I2C_M_RD); > > > > + read = msg[i].flags& I2C_M_RD; > > > > > > ttusb2 I2C-adapter seems to be fine for my eyes now. No more writing > > > any random bytes in case of single read. Good! > > > > > > > + .dtv6_if_freq_khz = TDA10048_IF_4000, > > > > + .dtv7_if_freq_khz = TDA10048_IF_4500, > > > > + .dtv8_if_freq_khz = TDA10048_IF_5000, > > > > + .clk_freq_khz = TDA10048_CLK_16000, > > > > > > > > > > > > +static int ct3650_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) > > > > > > cosmetic issue rename to ttusb2_ct3650_i2c_gate_ctrl > > > > > > > { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 }, > > > > > > > > + { TDA10048_CLK_16000, TDA10048_IF_4500, 5, 3, 0 }, > > > > + { TDA10048_CLK_16000, TDA10048_IF_5000, 5, 3, 0 }, > > > > > > > > + /* Set the pll registers */ > > > > + tda10048_writereg(state, TDA10048_CONF_PLL1, 0x0f); > > > > + tda10048_writereg(state, TDA10048_CONF_PLL2, (u8)(state- > > > > > >pll_mfactor)); > > > > > > > + tda10048_writereg(state, TDA10048_CONF_PLL3, > > > > tda10048_readreg(state, TDA10048_CONF_PLL3) | > > > > ((u8)(state->pll_nfactor) | 0x40)); > > > > > > This if only issue can have effect to functionality and I want double > > > check. I see few things. > > > > > > 1) clock (and PLL) settings should be done generally only once at > > > .init() and probably .sleep() in case of needed for sleep. Something > > > like start clock in init, stop clock in sleep. It is usually very first > > > thing to set before other. Now it is in wrong place - .set_frontend(). > > > > > > 2) Those clock settings seem somehow weird. As you set different PLL M > > > divider for 6 MHz bandwidth than others. Have you looked those are > > > really correct? I suspect there could be some other Xtal than 16MHz and > > > thus those are wrong. Which Xtals there is inside device used? There is > > > most likely 3 Xtals, one for each chip. It is metal box nearest to > > > chip. > > > > I left 6MHz like it was before in the driver. I try to do other way, > > allowing to put different PLL in config that the default ones of the > > driver and initialize it in init. > > > > Jose Alberto > > Attached new version of the patch. Adding tda827x lna and doing tda10048 > pll in other way. > > Jose Alberto Another version, without tda827x lna. It don't improve anything. Jose Alberto > > > > Ran checkpatch.pl also to find out style issues before send patch. > > > > > > I have send new version, hopefully final, of MFE. It changes array name > > > from adap->mfe to adap-fe. You should also update that. > > > > > > > > > regards > > > Antti > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html Reviewed-by: Antti Palosaari Signed-off-by: Jose Alberto Reguero diff -ur linux/drivers/media/dvb/dvb-usb/ttusb2.c linux.new/drivers/media/dvb/dvb-usb/ttusb2.c --- linux/drivers/media/dvb/dvb-usb/ttusb2.c 2011-08-01 05:45:24.000000000 +0200 +++ linux.new/drivers/media/dvb/dvb-usb/ttusb2.c 2011-08-08 12:22:59.624061045 +0200 @@ -30,6 +30,7 @@ #include "tda826x.h" #include "tda10086.h" #include "tda1002x.h" +#include "tda10048.h" #include "tda827x.h" #include "lnbp21.h" @@ -82,7 +83,7 @@ { struct dvb_usb_device *d = i2c_get_adapdata(adap); static u8 obuf[60], ibuf[60]; - int i,read; + int i, write_read, read; if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; @@ -91,28 +92,35 @@ warn("more than 2 i2c messages at a time is not handled yet. TODO."); for (i = 0; i < num; i++) { - read = i+1 < num && (msg[i+1].flags & I2C_M_RD); + write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); + read = msg[i].flags & I2C_M_RD; - obuf[0] = (msg[i].addr << 1) | read; - obuf[1] = msg[i].len; + obuf[0] = (msg[i].addr << 1) | (write_read | read); + if (read) + obuf[1] = 0; + else + obuf[1] = msg[i].len; /* read request */ - if (read) + if (write_read) obuf[2] = msg[i+1].len; + else if (read) + obuf[2] = msg[i].len; else obuf[2] = 0; - memcpy(&obuf[3],msg[i].buf,msg[i].len); + memcpy(&obuf[3], msg[i].buf, msg[i].len); if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) { err("i2c transfer failed."); break; } - if (read) { - memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len); + if (write_read) { + memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len); i++; - } + } else if (read) + memcpy(msg[i].buf, &ibuf[3], msg[i].len); } mutex_unlock(&d->i2c_mutex); @@ -190,6 +198,25 @@ .deltaf = 0xa511, }; +static struct tda10048_config tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_4000, + .dtv7_if_freq_khz = TDA10048_IF_4500, + .dtv8_if_freq_khz = TDA10048_IF_5000, + .clk_freq_khz = TDA10048_CLK_16000, + .no_firmware = 1, + .set_pll = true , + .pll_m = 5, + .pll_n = 3, + .pll_p = 0, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev,0,3) < 0) @@ -203,20 +230,56 @@ return 0; } +static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + return adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], enable); +} + static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) { if (usb_set_interface(adap->dev->udev, 0, 3) < 0) err("set interface to alts=3 failed"); - if ((adap->fe[0] = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) { - deb_info("TDA10023 attach failed\n"); - return -ENODEV; + + if (adap->fe[0] == NULL) { + /* FE 0 DVB-C */ + adap->fe[0] = dvb_attach(tda10023_attach, + &tda10023_config, &adap->dev->i2c_adap, 0x48); + + if (adap->fe[0] == NULL) { + deb_info("TDA10023 attach failed\n"); + return -ENODEV; + } + } else { + adap->fe[1] = dvb_attach(tda10048_attach, + &tda10048_config, &adap->dev->i2c_adap); + + if (adap->fe[1] == NULL) { + deb_info("TDA10048 attach failed\n"); + return -ENODEV; + } + + /* tuner is behind TDA10023 I2C-gate */ + adap->fe[1]->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl; + } + return 0; } static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) { - if (dvb_attach(tda827x_attach, adap->fe[0], 0x61, &adap->dev->i2c_adap, NULL) == NULL) { + struct dvb_frontend *fe; + + /* MFE: select correct FE to attach tuner since that's called twice */ + if (adap->fe[1] == NULL) + fe = adap->fe[0]; + else + fe = adap->fe[1]; + + /* attach tuner */ + if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) { printk(KERN_ERR "%s: No tda827x found!\n", __func__); return -ENODEV; } @@ -385,6 +448,7 @@ { .streaming_ctrl = NULL, + .num_frontends = 2, .frontend_attach = ttusb2_frontend_tda10023_attach, .tuner_attach = ttusb2_tuner_tda827x_attach, diff -ur linux/drivers/media/dvb/frontends/tda10048.c linux.new/drivers/media/dvb/frontends/tda10048.c --- linux/drivers/media/dvb/frontends/tda10048.c 2010-10-25 01:34:58.000000000 +0200 +++ linux.new/drivers/media/dvb/frontends/tda10048.c 2011-08-07 22:23:01.574897364 +0200 @@ -206,15 +206,16 @@ static struct pll_tab { u32 clk_freq_khz; u32 if_freq_khz; - u8 m, n, p; } pll_tab[] = { - { TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 }, - { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 }, + { TDA10048_CLK_4000, TDA10048_IF_36130 }, + { TDA10048_CLK_16000, TDA10048_IF_3300 }, + { TDA10048_CLK_16000, TDA10048_IF_3500 }, + { TDA10048_CLK_16000, TDA10048_IF_3800 }, + { TDA10048_CLK_16000, TDA10048_IF_4000 }, + { TDA10048_CLK_16000, TDA10048_IF_4300 }, + { TDA10048_CLK_16000, TDA10048_IF_4500 }, + { TDA10048_CLK_16000, TDA10048_IF_5000 }, + { TDA10048_CLK_16000, TDA10048_IF_36130 }, }; static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) @@ -460,9 +461,6 @@ state->freq_if_hz = pll_tab[i].if_freq_khz * 1000; state->xtal_hz = pll_tab[i].clk_freq_khz * 1000; - state->pll_mfactor = pll_tab[i].m; - state->pll_nfactor = pll_tab[i].n; - state->pll_pfactor = pll_tab[i].p; break; } } @@ -781,6 +779,10 @@ dprintk(1, "%s()\n", __func__); + /* PLL */ + init_tab[4].data = (u8)(state->pll_mfactor); + init_tab[5].data = (u8)(state->pll_nfactor) | 0x40; + /* Apply register defaults */ for (i = 0; i < ARRAY_SIZE(init_tab); i++) tda10048_writereg(state, init_tab[i].reg, init_tab[i].data); @@ -1123,7 +1125,7 @@ /* setup the state and clone the config */ memcpy(&state->config, config, sizeof(*config)); state->i2c = i2c; - state->fwloaded = 0; + state->fwloaded = config->no_firmware; state->bandwidth = BANDWIDTH_8_MHZ; /* check if the demod is present */ @@ -1135,6 +1137,17 @@ sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + /* set pll */ + if (config->set_pll) { + state->pll_mfactor = config->pll_m; + state->pll_nfactor = config->pll_n; + state->pll_pfactor = config->pll_p; + } else { + state->pll_mfactor = 10; + state->pll_nfactor = 3; + state->pll_pfactor = 0; + } + /* Establish any defaults the the user didn't pass */ tda10048_establish_defaults(&state->frontend); diff -ur linux/drivers/media/dvb/frontends/tda10048.h linux.new/drivers/media/dvb/frontends/tda10048.h --- linux/drivers/media/dvb/frontends/tda10048.h 2010-07-03 23:22:08.000000000 +0200 +++ linux.new/drivers/media/dvb/frontends/tda10048.h 2011-08-01 12:11:16.091956357 +0200 @@ -51,6 +51,7 @@ #define TDA10048_IF_4300 4300 #define TDA10048_IF_4500 4500 #define TDA10048_IF_4750 4750 +#define TDA10048_IF_5000 5000 #define TDA10048_IF_36130 36130 u16 dtv6_if_freq_khz; u16 dtv7_if_freq_khz; @@ -62,6 +63,13 @@ /* Disable I2C gate access */ u8 disable_gate_access; + + bool no_firmware; + + bool set_pll; + u8 pll_m; + u8 pll_p; + u8 pll_n; }; #if defined(CONFIG_DVB_TDA10048) || \