| Message ID | 201304210016.33720.sergei.shtylyov@cogentembedded.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 04/20/2013 10:16 PM, Sergei Shtylyov wrote: > From: Vladimir Barinov<vladimir.barinov@cogentembedded.com> > > Add OKI Semiconductor ML86V7667 video decoder driver. > > Signed-off-by: Vladimir Barinov<vladimir.barinov@cogentembedded.com> > [Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of > ml86v7667_probe(); some cleanup.] > Signed-off-by: Sergei Shtylyov<sergei.shtylyov@cogentembedded.com> > > --- > drivers/media/i2c/Kconfig | 9 > drivers/media/i2c/Makefile | 1 > drivers/media/i2c/ml86v7667.c | 504 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 514 insertions(+) > +static int ml86v7667_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + ml86v7667_querystd(sd,&priv->std); > + > + a->bounds.left = 0; > + a->bounds.top = 0; > + a->bounds.width = 720; > + a->bounds.height = priv->std& V4L2_STD_525_60 ? 480 : 576; > + a->defrect = a->bounds; > + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + a->pixelaspect.numerator = 1; > + a->pixelaspect.denominator = 1; > + > + return 0; > +} > +static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { > + .querystd = ml86v7667_querystd, > + .g_input_status = ml86v7667_g_input_status, > + .enum_mbus_fmt = ml86v7667_enum_mbus_fmt, > + .try_mbus_fmt = ml86v7667_try_mbus_fmt, > + .g_mbus_fmt = ml86v7667_g_mbus_fmt, > + .s_mbus_fmt = ml86v7667_s_mbus_fmt, > + .cropcap = ml86v7667_cropcap, > + .g_mbus_config = ml86v7667_g_mbus_config, > +}; Why do you need .cropcap when there is no s_crop/g_crop ops ? Is it only for pixel aspect ratio ? Also, new drivers are supposed to use the selections API instead (set/get_selection ops). However this requires pad level ops support in your host driver, hence might be a bigger issue. Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Here's a quick review: On Sat April 20 2013 22:16:33 Sergei Shtylyov wrote: > From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > > Add OKI Semiconductor ML86V7667 video decoder driver. > > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > [Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of > ml86v7667_probe(); some cleanup.] > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > > --- > drivers/media/i2c/Kconfig | 9 > drivers/media/i2c/Makefile | 1 > drivers/media/i2c/ml86v7667.c | 504 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 514 insertions(+) > > Index: renesas/drivers/media/i2c/Kconfig > =================================================================== > --- renesas.orig/drivers/media/i2c/Kconfig > +++ renesas/drivers/media/i2c/Kconfig > @@ -227,6 +227,15 @@ config VIDEO_KS0127 > To compile this driver as a module, choose M here: the > module will be called ks0127. > > +config VIDEO_ML86V7667 > + tristate "OKI ML86V7667 video decoder" > + depends on VIDEO_V4L2 && I2C > + ---help--- > + Support for the OKI Semiconductor ML86V7667 video decoder. > + > + To compile this driver as a module, choose M here: the > + module will be called ml86v7667. > + > config VIDEO_SAA7110 > tristate "Philips SAA7110 video decoder" > depends on VIDEO_V4L2 && I2C > Index: renesas/drivers/media/i2c/Makefile > =================================================================== > --- renesas.orig/drivers/media/i2c/Makefile > +++ renesas/drivers/media/i2c/Makefile > @@ -64,3 +64,4 @@ obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o > obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o > obj-$(CONFIG_VIDEO_AK881X) += ak881x.o > obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o > +obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o > Index: renesas/drivers/media/i2c/ml86v7667.c > =================================================================== > --- /dev/null > +++ renesas/drivers/media/i2c/ml86v7667.c > @@ -0,0 +1,504 @@ > +/* > + * OKI Semiconductor ML86V7667 video decoder driver > + * > + * Author: Vladimir Barinov <source@cogentembedded.com> > + * Copyright (C) 2013 Cogent Embedded, Inc. > + * Copyright (C) 2013 Renesas Solutions Corp. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/slab.h> > +#include <linux/videodev2.h> > +#include <media/v4l2-chip-ident.h> > +#include <media/v4l2-subdev.h> > +#include <media/v4l2-device.h> > +#include <media/v4l2-ioctl.h> > +#include <media/v4l2-ctrls.h> > + > +#define DRV_NAME "ml86v7667" > + > +/* Subaddresses */ > +#define MRA_REG 0x00 /* Mode Register A */ > +#define MRC_REG 0x02 /* Mode Register C */ > +#define LUMC_REG 0x0C /* Luminance Control */ > +#define CLC_REG 0x10 /* Contrast level control */ > +#define SSEPL_REG 0x11 /* Sync separation level */ > +#define CHRCA_REG 0x12 /* Chrominance Control A */ > +#define ACCC_REG 0x14 /* ACC Loop filter & Chrominance control */ > +#define ACCRC_REG 0x15 /* ACC Reference level control */ > +#define HUE_REG 0x16 /* Hue control */ > +#define ADC2_REG 0x1F /* ADC Register 2 */ > +#define PLLR1_REG 0x20 /* PLL Register 1 */ > +#define STATUS_REG 0x2C /* STATUS Register */ > + > +/* Mode Register A register bits */ > +#define MRA_OUTPUT_MODE_MASK (3 << 6) > +#define MRA_ITUR_BT601 (1 << 6) > +#define MRA_ITUR_BT656 (0 << 6) > +#define MRA_INPUT_MODE_MASK (7 << 3) > +#define MRA_PAL_BT601 (4 << 3) > +#define MRA_NTSC_BT601 (0 << 3) > +#define MRA_REGISTER_MODE (1 << 0) > + > +/* Mode Register C register bits */ > +#define MRC_AUTOSELECT (1 << 7) > + > +/* Luminance Control register bits */ > +#define LUMC_ONOFF_SHIFT 7 > +#define LUMC_ONOFF_MASK (1 << 7) > + > +/* Contrast level control register bits */ > +#define CLC_CONTRAST_ONOFF (1 << 7) > +#define CLC_CONTRAST_MASK 0x0F > + > +/* Sync separation level register bits */ > +#define SSEPL_LUMINANCE_ONOFF (1 << 7) > +#define SSEPL_LUMINANCE_MASK 0x7F > + > +/* Chrominance Control A register bits */ > +#define CHRCA_MODE_SHIFT 6 > +#define CHRCA_MODE_MASK (1 << 6) > + > +/* ACC Loop filter & Chrominance control register bits */ > +#define ACCC_CHROMA_CR_SHIFT 3 > +#define ACCC_CHROMA_CR_MASK (7 << 3) > +#define ACCC_CHROMA_CB_SHIFT 0 > +#define ACCC_CHROMA_CB_MASK (7 << 3) > + > +/* ACC Reference level control register bits */ > +#define ACCRC_CHROMA_MASK 0xfc > +#define ACCRC_CHROMA_SHIFT 2 > + > +/* ADC Register 2 register bits */ > +#define ADC2_CLAMP_VOLTAGE_MASK (7 << 1) > +#define ADC2_CLAMP_VOLTAGE(n) ((n & 7) << 1) > + > +/* PLL Register 1 register bits */ > +#define PLLR1_FIXED_CLOCK (1 << 7) > + > +/* STATUS Register register bits */ > +#define STATUS_HLOCK_DETECT (1 << 3) > +#define STATUS_NTSCPAL (1 << 2) > + > +struct ml86v7667_priv { > + struct v4l2_subdev sd; > + struct v4l2_ctrl_handler hdl; > + struct v4l2_mbus_framefmt fmt; > + v4l2_std_id std; > + bool autodetect; Generally autodetect is a bad idea: changing from pal to ntsc on the fly can cause problems further down the pipeline since the it might affect the amount of data being DMA-ed. It's also non-standard behavior. I recommend dropping autodetect support. > +}; > + > +static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev) > +{ > + return container_of(subdev, struct ml86v7667_priv, sd); > +} > + > +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) > +{ > + return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd; > +} > + > +static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg, > + const u8 mask, const u8 data) > +{ > + int val = i2c_smbus_read_byte_data(client, reg); > + if (val < 0) > + return val; > + > + val = (val & ~mask) | (data & mask); > + return i2c_smbus_write_byte_data(client, reg, val); > +} > + > +static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct v4l2_subdev *sd = to_sd(ctrl); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + int ret = 0; > + > + switch (ctrl->id) { > + case V4L2_CID_BRIGHTNESS: > + ret = ml86v7667_mask_set(client, SSEPL_REG, > + SSEPL_LUMINANCE_MASK, ctrl->val); > + break; > + case V4L2_CID_CONTRAST: > + ret = ml86v7667_mask_set(client, CLC_REG, > + CLC_CONTRAST_MASK, ctrl->val); > + break; > + case V4L2_CID_CHROMA_GAIN: > + ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK, > + ctrl->val << ACCRC_CHROMA_SHIFT); > + break; > + case V4L2_CID_HUE: > + ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val); > + break; > + case V4L2_CID_RED_BALANCE: > + ret = ml86v7667_mask_set(client, ACCC_REG, > + ACCC_CHROMA_CR_MASK, > + ctrl->val << ACCC_CHROMA_CR_SHIFT); > + break; > + case V4L2_CID_BLUE_BALANCE: > + ret = ml86v7667_mask_set(client, ACCC_REG, > + ACCC_CHROMA_CB_MASK, > + ctrl->val << ACCC_CHROMA_CB_SHIFT); > + break; > + case V4L2_CID_SHARPNESS: > + ret = ml86v7667_mask_set(client, LUMC_REG, > + LUMC_ONOFF_MASK, > + ctrl->val << LUMC_ONOFF_SHIFT); > + break; > + case V4L2_CID_COLOR_KILLER: > + ret = ml86v7667_mask_set(client, CHRCA_REG, > + CHRCA_MODE_MASK, > + ctrl->val << CHRCA_MODE_SHIFT); > + break; > + } > + > + return 0; > +} > + > +static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + int status_reg; > + > + if (!priv->autodetect) { > + *std = priv->std; > + return 0; > + } > + > + status_reg = i2c_smbus_read_byte_data(client, STATUS_REG); > + if (status_reg < 0) > + return status_reg; > + > + if (status_reg & STATUS_HLOCK_DETECT) > + *std = status_reg & STATUS_NTSCPAL ? V4L2_STD_PAL : > + V4L2_STD_NTSC; > + else > + *std = V4L2_STD_UNKNOWN; > + > + return 0; > +} > + > +static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + int status_reg; > + > + status_reg = i2c_smbus_read_byte_data(client, STATUS_REG); > + if (status_reg < 0) > + return status_reg; > + > + *status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL; > + > + return 0; > +} > + > +static int ml86v7667_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, > + enum v4l2_mbus_pixelcode *code) > +{ > + if (index > 0) > + return -EINVAL; > + > + *code = V4L2_MBUS_FMT_YUYV8_2X8; > + > + return 0; > +} > + > +static int ml86v7667_try_mbus_fmt(struct v4l2_subdev *sd, > + struct v4l2_mbus_framefmt *fmt) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + ml86v7667_querystd(sd, &priv->std); > + > + fmt->code = V4L2_MBUS_FMT_YUYV8_2X8; > + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; > + fmt->field = V4L2_FIELD_INTERLACED; > + fmt->width = 720; > + fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576; > + > + return 0; > +} > + > +static int ml86v7667_g_mbus_fmt(struct v4l2_subdev *sd, > + struct v4l2_mbus_framefmt *fmt) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + *fmt = priv->fmt; > + > + return 0; > +} > + > +static int ml86v7667_s_mbus_fmt(struct v4l2_subdev *sd, > + struct v4l2_mbus_framefmt *fmt) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + ml86v7667_try_mbus_fmt(sd, fmt); > + priv->fmt = *fmt; > + > + return 0; > +} > + > +static int ml86v7667_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + ml86v7667_querystd(sd, &priv->std); Always use the current standard, never query the standard inside functions like this. It's up to userspace to call QUERYSTD and then S_STD. > + > + a->bounds.left = 0; > + a->bounds.top = 0; > + a->bounds.width = 720; > + a->bounds.height = priv->std & V4L2_STD_525_60 ? 480 : 576; > + a->defrect = a->bounds; > + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; > + a->pixelaspect.numerator = 1; > + a->pixelaspect.denominator = 1; > + > + return 0; > +} > + > +static int ml86v7667_g_mbus_config(struct v4l2_subdev *sd, > + struct v4l2_mbus_config *cfg) > +{ > + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | > + V4L2_MBUS_DATA_ACTIVE_HIGH; > + cfg->type = V4L2_MBUS_BT656; > + > + return 0; > +} > + > +static int ml86v7667_g_chip_ident(struct v4l2_subdev *sd, > + struct v4l2_dbg_chip_ident *id) > +{ > + id->ident = V4L2_IDENT_UNKNOWN; > + id->revision = 0; > + > + return 0; > +} Just drop this function, it's no longer needed and this op will be removed in 3.11. > + > +static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std) > +{ > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); > + int ret; > + u8 mode; > + > + if (std == V4L2_STD_ALL) { > + /* enable PAL/NTSC autodetection */ > + ret = ml86v7667_mask_set(client, MRC_REG, > + MRC_AUTOSELECT, MRC_AUTOSELECT); > + priv->autodetect = true; > + } else { > + /* PAL/NTSC ITU-R BT.601 input mode */ > + mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601; > + ret = ml86v7667_mask_set(client, MRA_REG, > + MRA_INPUT_MODE_MASK, mode); > + if (ret < 0) > + return ret; > + > + /* disable PAL/NTSC autodetection */ > + ret = ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0); > + if (ret < 0) > + return ret; > + > + priv->std = std; > + priv->autodetect = false; > + } > + > + return 0; > +} > + > +#ifdef CONFIG_VIDEO_ADV_DEBUG > +static int ml86v7667_g_register(struct v4l2_subdev *sd, > + struct v4l2_dbg_register *reg) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + int ret; > + > + if (!v4l2_chip_match_i2c_client(client, ®->match)) > + return -EINVAL; > + if (!capable(CAP_SYS_ADMIN)) > + return -EPERM; > + > + ret = i2c_smbus_read_byte_data(client, (u8)reg->reg); > + if (ret < 0) > + return ret; > + > + reg->val = ret; > + reg->size = sizeof(u8); > + > + return 0; > +} > + > +static int ml86v7667_s_register(struct v4l2_subdev *sd, > + struct v4l2_dbg_register *reg) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + > + if (!v4l2_chip_match_i2c_client(client, ®->match)) > + return -EINVAL; > + if (!capable(CAP_SYS_ADMIN)) > + return -EPERM; > + > + return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val); > +} > +#endif > + > +static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = { > + .s_ctrl = ml86v7667_s_ctrl, > +}; > + > +static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { > + .querystd = ml86v7667_querystd, > + .g_input_status = ml86v7667_g_input_status, > + .enum_mbus_fmt = ml86v7667_enum_mbus_fmt, > + .try_mbus_fmt = ml86v7667_try_mbus_fmt, > + .g_mbus_fmt = ml86v7667_g_mbus_fmt, > + .s_mbus_fmt = ml86v7667_s_mbus_fmt, > + .cropcap = ml86v7667_cropcap, > + .g_mbus_config = ml86v7667_g_mbus_config, > +}; > + > +static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { > + .g_chip_ident = ml86v7667_g_chip_ident, > + .s_std = ml86v7667_s_std, > +#ifdef CONFIG_VIDEO_ADV_DEBUG > + .g_register = ml86v7667_g_register, > + .s_register = ml86v7667_s_register, > +#endif > +}; > + > +static struct v4l2_subdev_ops ml86v7667_subdev_ops = { > + .core = &ml86v7667_subdev_core_ops, > + .video = &ml86v7667_subdev_video_ops, > +}; > + > +static int ml86v7667_init(struct ml86v7667_priv *priv) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); > + int ret; > + > + /* BT.656-4 output mode, register mode */ > + ret = ml86v7667_mask_set(client, MRA_REG, > + MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE, > + MRA_ITUR_BT656 | MRA_REGISTER_MODE); > + > + /* PLL circuit fixed clock, 32MHz */ > + ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK, > + PLLR1_FIXED_CLOCK); > + > + /* ADC2 clamping voltage maximum */ > + ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK, > + ADC2_CLAMP_VOLTAGE(7)); > + > + /* enable luminance function */ > + ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF, > + SSEPL_LUMINANCE_ONOFF); > + > + /* enable contrast function */ > + ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0); > + > + /* NTS/PAL autodetection enabled by default */ > + priv->autodetect = true; > + > + return ret; > +} > + > +static int ml86v7667_probe(struct i2c_client *client, > + const struct i2c_device_id *did) > +{ > + struct ml86v7667_priv *priv; > + int ret; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > + return -EIO; > + > + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops); > + > + v4l2_ctrl_handler_init(&priv->hdl, 8); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_BRIGHTNESS, -64, 63, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_CONTRAST, -8, 7, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_HUE, -128, 127, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_RED_BALANCE, -4, 3, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_SHARPNESS, 0, 1, 1, 0); > + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, > + V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); > + priv->sd.ctrl_handler = &priv->hdl; > + > + ret = priv->hdl.error; > + if (ret) > + goto cleanup; > + > + v4l2_ctrl_handler_setup(&priv->hdl); > + > + ret = ml86v7667_init(priv); > + if (ret) > + goto cleanup; > + > + v4l_info(client, "chip found @ 0x%02x (%s)\n", > + client->addr, client->adapter->name); > + return 0; > + > +cleanup: > + v4l2_ctrl_handler_free(&priv->hdl); > + v4l2_device_unregister_subdev(&priv->sd); > + v4l_err(client, "failed to probe @ 0x%02x (%s)\n", > + client->addr, client->adapter->name); > + return ret; > +} > + > +static int ml86v7667_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct ml86v7667_priv *priv = to_ml86v7667(sd); > + > + v4l2_ctrl_handler_free(&priv->hdl); > + v4l2_device_unregister_subdev(&priv->sd); > + > + return 0; > +} > + > +static const struct i2c_device_id ml86v7667_id[] = { > + {DRV_NAME, 0}, > + {}, > +}; > +MODULE_DEVICE_TABLE(i2c, ml86v7667_id); > + > +static struct i2c_driver ml86v7667_i2c_driver = { > + .driver = { > + .name = DRV_NAME, > + .owner = THIS_MODULE, > + }, > + .probe = ml86v7667_probe, > + .remove = ml86v7667_remove, > + .id_table = ml86v7667_id, > +}; > + > +module_i2c_driver(ml86v7667_i2c_driver); > + > +MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver"); > +MODULE_AUTHOR("Vladimir Barinov"); > +MODULE_LICENSE("GPL"); > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello. On 04/21/2013 12:16 AM, Sergei Shtylyov wrote: > From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > > Add OKI Semiconductor ML86V7667 video decoder driver. > > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > [Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of > ml86v7667_probe(); some cleanup.] > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [...] > Index: renesas/drivers/media/i2c/ml86v7667.c > =================================================================== > --- /dev/null > +++ renesas/drivers/media/i2c/ml86v7667.c > @@ -0,0 +1,504 @@ [...] > +/* ACC Loop filter & Chrominance control register bits */ > +#define ACCC_CHROMA_CR_SHIFT 3 > +#define ACCC_CHROMA_CR_MASK (7 << 3) > +#define ACCC_CHROMA_CB_SHIFT 0 > +#define ACCC_CHROMA_CB_MASK (7 << 3) Should be (7 << 0), of course. My fault. :-( WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sylwester, Thank you for the review. Sylwester Nawrocki wrote > >> +static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { >> + .querystd = ml86v7667_querystd, >> + .g_input_status = ml86v7667_g_input_status, >> + .enum_mbus_fmt = ml86v7667_enum_mbus_fmt, >> + .try_mbus_fmt = ml86v7667_try_mbus_fmt, >> + .g_mbus_fmt = ml86v7667_g_mbus_fmt, >> + .s_mbus_fmt = ml86v7667_s_mbus_fmt, >> + .cropcap = ml86v7667_cropcap, >> + .g_mbus_config = ml86v7667_g_mbus_config, >> +}; > > Why do you need .cropcap when there is no s_crop/g_crop ops ? Is it > only for pixel aspect ratio ? Yes it is. > > Also, new drivers are supposed to use the selections API instead > (set/get_selection ops). However this requires pad level ops support > in your host driver, hence might be a bigger issue. Yes, since the host driver (rcar_vin is already send for review) is designed for soc-camera layer that does not use the pad level ops but needs at least cropcap to get the pixel aspect ratio. The soc-camera has it's own set/get_selection in soc_camera_host_ops and it is possible to use it like all i2c/soc_camera sensors can/do. But we would not like to design the ml86v7667 as soc-camera device since it will not be available for all non soc-camera v4l2 hosts. Regards, Vladimir -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: renesas/drivers/media/i2c/Kconfig =================================================================== --- renesas.orig/drivers/media/i2c/Kconfig +++ renesas/drivers/media/i2c/Kconfig @@ -227,6 +227,15 @@ config VIDEO_KS0127 To compile this driver as a module, choose M here: the module will be called ks0127. +config VIDEO_ML86V7667 + tristate "OKI ML86V7667 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the OKI Semiconductor ML86V7667 video decoder. + + To compile this driver as a module, choose M here: the + module will be called ml86v7667. + config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L2 && I2C Index: renesas/drivers/media/i2c/Makefile =================================================================== --- renesas.orig/drivers/media/i2c/Makefile +++ renesas/drivers/media/i2c/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o obj-$(CONFIG_VIDEO_AK881X) += ak881x.o obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o +obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o Index: renesas/drivers/media/i2c/ml86v7667.c =================================================================== --- /dev/null +++ renesas/drivers/media/i2c/ml86v7667.c @@ -0,0 +1,504 @@ +/* + * OKI Semiconductor ML86V7667 video decoder driver + * + * Author: Vladimir Barinov <source@cogentembedded.com> + * Copyright (C) 2013 Cogent Embedded, Inc. + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> + +#define DRV_NAME "ml86v7667" + +/* Subaddresses */ +#define MRA_REG 0x00 /* Mode Register A */ +#define MRC_REG 0x02 /* Mode Register C */ +#define LUMC_REG 0x0C /* Luminance Control */ +#define CLC_REG 0x10 /* Contrast level control */ +#define SSEPL_REG 0x11 /* Sync separation level */ +#define CHRCA_REG 0x12 /* Chrominance Control A */ +#define ACCC_REG 0x14 /* ACC Loop filter & Chrominance control */ +#define ACCRC_REG 0x15 /* ACC Reference level control */ +#define HUE_REG 0x16 /* Hue control */ +#define ADC2_REG 0x1F /* ADC Register 2 */ +#define PLLR1_REG 0x20 /* PLL Register 1 */ +#define STATUS_REG 0x2C /* STATUS Register */ + +/* Mode Register A register bits */ +#define MRA_OUTPUT_MODE_MASK (3 << 6) +#define MRA_ITUR_BT601 (1 << 6) +#define MRA_ITUR_BT656 (0 << 6) +#define MRA_INPUT_MODE_MASK (7 << 3) +#define MRA_PAL_BT601 (4 << 3) +#define MRA_NTSC_BT601 (0 << 3) +#define MRA_REGISTER_MODE (1 << 0) + +/* Mode Register C register bits */ +#define MRC_AUTOSELECT (1 << 7) + +/* Luminance Control register bits */ +#define LUMC_ONOFF_SHIFT 7 +#define LUMC_ONOFF_MASK (1 << 7) + +/* Contrast level control register bits */ +#define CLC_CONTRAST_ONOFF (1 << 7) +#define CLC_CONTRAST_MASK 0x0F + +/* Sync separation level register bits */ +#define SSEPL_LUMINANCE_ONOFF (1 << 7) +#define SSEPL_LUMINANCE_MASK 0x7F + +/* Chrominance Control A register bits */ +#define CHRCA_MODE_SHIFT 6 +#define CHRCA_MODE_MASK (1 << 6) + +/* ACC Loop filter & Chrominance control register bits */ +#define ACCC_CHROMA_CR_SHIFT 3 +#define ACCC_CHROMA_CR_MASK (7 << 3) +#define ACCC_CHROMA_CB_SHIFT 0 +#define ACCC_CHROMA_CB_MASK (7 << 3) + +/* ACC Reference level control register bits */ +#define ACCRC_CHROMA_MASK 0xfc +#define ACCRC_CHROMA_SHIFT 2 + +/* ADC Register 2 register bits */ +#define ADC2_CLAMP_VOLTAGE_MASK (7 << 1) +#define ADC2_CLAMP_VOLTAGE(n) ((n & 7) << 1) + +/* PLL Register 1 register bits */ +#define PLLR1_FIXED_CLOCK (1 << 7) + +/* STATUS Register register bits */ +#define STATUS_HLOCK_DETECT (1 << 3) +#define STATUS_NTSCPAL (1 << 2) + +struct ml86v7667_priv { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_mbus_framefmt fmt; + v4l2_std_id std; + bool autodetect; +}; + +static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct ml86v7667_priv, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd; +} + +static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg, + const u8 mask, const u8 data) +{ + int val = i2c_smbus_read_byte_data(client, reg); + if (val < 0) + return val; + + val = (val & ~mask) | (data & mask); + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ret = ml86v7667_mask_set(client, SSEPL_REG, + SSEPL_LUMINANCE_MASK, ctrl->val); + break; + case V4L2_CID_CONTRAST: + ret = ml86v7667_mask_set(client, CLC_REG, + CLC_CONTRAST_MASK, ctrl->val); + break; + case V4L2_CID_CHROMA_GAIN: + ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK, + ctrl->val << ACCRC_CHROMA_SHIFT); + break; + case V4L2_CID_HUE: + ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val); + break; + case V4L2_CID_RED_BALANCE: + ret = ml86v7667_mask_set(client, ACCC_REG, + ACCC_CHROMA_CR_MASK, + ctrl->val << ACCC_CHROMA_CR_SHIFT); + break; + case V4L2_CID_BLUE_BALANCE: + ret = ml86v7667_mask_set(client, ACCC_REG, + ACCC_CHROMA_CB_MASK, + ctrl->val << ACCC_CHROMA_CB_SHIFT); + break; + case V4L2_CID_SHARPNESS: + ret = ml86v7667_mask_set(client, LUMC_REG, + LUMC_ONOFF_MASK, + ctrl->val << LUMC_ONOFF_SHIFT); + break; + case V4L2_CID_COLOR_KILLER: + ret = ml86v7667_mask_set(client, CHRCA_REG, + CHRCA_MODE_MASK, + ctrl->val << CHRCA_MODE_SHIFT); + break; + } + + return 0; +} + +static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int status_reg; + + if (!priv->autodetect) { + *std = priv->std; + return 0; + } + + status_reg = i2c_smbus_read_byte_data(client, STATUS_REG); + if (status_reg < 0) + return status_reg; + + if (status_reg & STATUS_HLOCK_DETECT) + *std = status_reg & STATUS_NTSCPAL ? V4L2_STD_PAL : + V4L2_STD_NTSC; + else + *std = V4L2_STD_UNKNOWN; + + return 0; +} + +static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int status_reg; + + status_reg = i2c_smbus_read_byte_data(client, STATUS_REG); + if (status_reg < 0) + return status_reg; + + *status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int ml86v7667_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_YUYV8_2X8; + + return 0; +} + +static int ml86v7667_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + ml86v7667_querystd(sd, &priv->std); + + fmt->code = V4L2_MBUS_FMT_YUYV8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + fmt->field = V4L2_FIELD_INTERLACED; + fmt->width = 720; + fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576; + + return 0; +} + +static int ml86v7667_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + *fmt = priv->fmt; + + return 0; +} + +static int ml86v7667_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + ml86v7667_try_mbus_fmt(sd, fmt); + priv->fmt = *fmt; + + return 0; +} + +static int ml86v7667_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + ml86v7667_querystd(sd, &priv->std); + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = 720; + a->bounds.height = priv->std & V4L2_STD_525_60 ? 480 : 576; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ml86v7667_g_mbus_config(struct v4l2_subdev *sd, + struct v4l2_mbus_config *cfg) +{ + cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_DATA_ACTIVE_HIGH; + cfg->type = V4L2_MBUS_BT656; + + return 0; +} + +static int ml86v7667_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + id->ident = V4L2_IDENT_UNKNOWN; + id->revision = 0; + + return 0; +} + +static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + u8 mode; + + if (std == V4L2_STD_ALL) { + /* enable PAL/NTSC autodetection */ + ret = ml86v7667_mask_set(client, MRC_REG, + MRC_AUTOSELECT, MRC_AUTOSELECT); + priv->autodetect = true; + } else { + /* PAL/NTSC ITU-R BT.601 input mode */ + mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601; + ret = ml86v7667_mask_set(client, MRA_REG, + MRA_INPUT_MODE_MASK, mode); + if (ret < 0) + return ret; + + /* disable PAL/NTSC autodetection */ + ret = ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0); + if (ret < 0) + return ret; + + priv->std = std; + priv->autodetect = false; + } + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ml86v7667_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + ret = i2c_smbus_read_byte_data(client, (u8)reg->reg); + if (ret < 0) + return ret; + + reg->val = ret; + reg->size = sizeof(u8); + + return 0; +} + +static int ml86v7667_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val); +} +#endif + +static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = { + .s_ctrl = ml86v7667_s_ctrl, +}; + +static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { + .querystd = ml86v7667_querystd, + .g_input_status = ml86v7667_g_input_status, + .enum_mbus_fmt = ml86v7667_enum_mbus_fmt, + .try_mbus_fmt = ml86v7667_try_mbus_fmt, + .g_mbus_fmt = ml86v7667_g_mbus_fmt, + .s_mbus_fmt = ml86v7667_s_mbus_fmt, + .cropcap = ml86v7667_cropcap, + .g_mbus_config = ml86v7667_g_mbus_config, +}; + +static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { + .g_chip_ident = ml86v7667_g_chip_ident, + .s_std = ml86v7667_s_std, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ml86v7667_g_register, + .s_register = ml86v7667_s_register, +#endif +}; + +static struct v4l2_subdev_ops ml86v7667_subdev_ops = { + .core = &ml86v7667_subdev_core_ops, + .video = &ml86v7667_subdev_video_ops, +}; + +static int ml86v7667_init(struct ml86v7667_priv *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + + /* BT.656-4 output mode, register mode */ + ret = ml86v7667_mask_set(client, MRA_REG, + MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE, + MRA_ITUR_BT656 | MRA_REGISTER_MODE); + + /* PLL circuit fixed clock, 32MHz */ + ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK, + PLLR1_FIXED_CLOCK); + + /* ADC2 clamping voltage maximum */ + ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK, + ADC2_CLAMP_VOLTAGE(7)); + + /* enable luminance function */ + ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF, + SSEPL_LUMINANCE_ONOFF); + + /* enable contrast function */ + ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0); + + /* NTS/PAL autodetection enabled by default */ + priv->autodetect = true; + + return ret; +} + +static int ml86v7667_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ml86v7667_priv *priv; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops); + + v4l2_ctrl_handler_init(&priv->hdl, 8); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_BRIGHTNESS, -64, 63, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_CONTRAST, -8, 7, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_RED_BALANCE, -4, 3, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_SHARPNESS, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); + priv->sd.ctrl_handler = &priv->hdl; + + ret = priv->hdl.error; + if (ret) + goto cleanup; + + v4l2_ctrl_handler_setup(&priv->hdl); + + ret = ml86v7667_init(priv); + if (ret) + goto cleanup; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + return 0; + +cleanup: + v4l2_ctrl_handler_free(&priv->hdl); + v4l2_device_unregister_subdev(&priv->sd); + v4l_err(client, "failed to probe @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + return ret; +} + +static int ml86v7667_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + v4l2_ctrl_handler_free(&priv->hdl); + v4l2_device_unregister_subdev(&priv->sd); + + return 0; +} + +static const struct i2c_device_id ml86v7667_id[] = { + {DRV_NAME, 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ml86v7667_id); + +static struct i2c_driver ml86v7667_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ml86v7667_probe, + .remove = ml86v7667_remove, + .id_table = ml86v7667_id, +}; + +module_i2c_driver(ml86v7667_i2c_driver); + +MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL");