diff mbox

[RESEND] gspca-stk1135: Add delay after configuring clock

Message ID 201311112331.37052.linux@rainbow-software.org (mailing list archive)
State New, archived
Headers show

Commit Message

Ondrej Zary Nov. 11, 2013, 10:31 p.m. UTC
Add a small delay at the end of configure_clock() to allow sensor to initialize.
This is needed by Asus VX2S laptop webcam to detect sensor type properly (the already-supported MT9M112).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
 drivers/media/usb/gspca/stk1135.c |    3 +++
 1 file changed, 3 insertions(+)

Comments

Sylwester Nawrocki Nov. 11, 2013, 10:46 p.m. UTC | #1
Hi Ondrej,

On 11/11/2013 11:31 PM, Ondrej Zary wrote:
> Add a small delay at the end of configure_clock() to allow sensor to initialize.
> This is needed by Asus VX2S laptop webcam to detect sensor type properly (the already-supported MT9M112).
>
> Signed-off-by: Ondrej Zary<linux@rainbow-software.org>
> ---
>   drivers/media/usb/gspca/stk1135.c |    3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c
> index 8add2f7..d8a813c 100644
> --- a/drivers/media/usb/gspca/stk1135.c
> +++ b/drivers/media/usb/gspca/stk1135.c
> @@ -361,6 +361,9 @@ static void stk1135_configure_clock(struct gspca_dev *gspca_dev)
>
>   	/* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */
>   	reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f);
> +
> +	/* wait a while for sensor to catch up */
> +	udelay(1000);

Instead of this 1 ms busy loop waiting it might be more optimal to use 
usleep_range(),
e.g. usleep_range(1000, 1100);

>   }
>
>   static void stk1135_camera_disable(struct gspca_dev *gspca_dev)

--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c
index 8add2f7..d8a813c 100644
--- a/drivers/media/usb/gspca/stk1135.c
+++ b/drivers/media/usb/gspca/stk1135.c
@@ -361,6 +361,9 @@  static void stk1135_configure_clock(struct gspca_dev *gspca_dev)
 
 	/* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */
 	reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f);
+
+	/* wait a while for sensor to catch up */
+	udelay(1000);
 }
 
 static void stk1135_camera_disable(struct gspca_dev *gspca_dev)