regression: (repost) firmware loading for dvico dual digital 4

Commit Message

Mauro Carvalho Chehab June 30, 2014, 2:56 p.m. UTC

Em Mon, 30 Jun 2014 23:19:46 +1000
Vincent McIntyre <[e-mail]> escreveu:

> Hi,
> 
> I am reposting this since it got ignored/missed last time around...
> 
> On 5/14/14, Vincent McIntyre <[e-mail]> wrote:
> > Hi,
> >
> > Antti asked me to report this.
> >
> > I built the latest media_build git on Ubuntu 12.04, with 3.8.0 kernel,
> > using './build --main-git'.
> > The attached tarball has the relvant info.
> >
> > Without the media_build modules, firmware loads fine (file dmesg.1)
> > Once I build and install the media_build modules, the firmware no
> > longer loads. (dmesg.2)
> >
> > The firmware loading issue appears to have been reported to ubuntu (a
> > later kernel, 3.11)  with a possible fix proposed, see
> > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291459
> >
> > I can post lspci etc details if people want.
> >
> 
> An updated version of the tar file is attached.
> 
> dmesg.1 is from 3.8.0-38 plus media-build modules and shows the
> firmware loading issue.
> The media-build HEAD revision was
>   commit e4a8d40f63afa8b0276ea7758d9b4d32e64a964d
>   Author: Hans Verkuil <[e-mail]>
>   Date:   Wed Jun 18 10:27:51 2014 +0200
> 
> dmesg.2 is from 3.8.0-42 with the ubuntu-provided modules and does not
> show the issue.
> 
> The issue occurs in later ubuntu kernels, 3.11 as noted previously
> and 3.13.0-30.
> 
> The OS is ubuntu 12.04 LTS, amd64.
> 
> I looked into bisecting this but could not figure out a procedure
> since the 'build' script tries really hard to use the latest
> media-build and kernel sources. It looks like one has to run the
> media-build 'make' against a checkout of the vanilla kernel that
> roughly corresponds in time (or at least is not from a time later than
> the current media-build revision that is checked out).

> 
> 
> Please respond this time

Next time, please add the logs directly at the email, as this makes
clearer about what's the problem and what driver has the issues.

Anyway, based on this:

[   16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   16.344378] cxusb: i2c wr: len=64 is too big!

I suspect that the enclosed patch should fix your issue. Please test. If it
works, please reply to this email with:
	Tested-by: your name <your@email>

Cheers,
Mauro

-

cxusb: increase buffer lenght to 80 bytes

As reported by Vincent:
	[   16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
	[   16.344378] cxusb: i2c wr: len=64 is too big!

64 bytes is too short for firmware load on this device. So, increase it
to 80 bytes.

Reported-by: Vincent McIntyre <[e-mail]>
Signed-off-by: Mauro Carvalho Chehab <[e-mail]>


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Vincent McIntyre July 3, 2014, 2 p.m. UTC | #1

Hi Mauro,
thanks for taking the time to look at this.

On Mon, Jun 30, 2014 at 11:56:33AM -0300, Mauro Carvalho Chehab wrote:
> Em Mon, 30 Jun 2014 23:19:46 +1000
> Vincent McIntyre <[e-mail]> escreveu:
> 
> > Hi,
> > 
> > I am reposting this since it got ignored/missed last time around...
> > 
> > On 5/14/14, Vincent McIntyre <[e-mail]> wrote:
> > > Hi,
> > >
> > > Antti asked me to report this.
> > >
> > > I built the latest media_build git on Ubuntu 12.04, with 3.8.0 kernel,
> > > using './build --main-git'.
> > > The attached tarball has the relvant info.
> > >
> > > Without the media_build modules, firmware loads fine (file dmesg.1)
> > > Once I build and install the media_build modules, the firmware no
> > > longer loads. (dmesg.2)
> > >
> > > The firmware loading issue appears to have been reported to ubuntu (a
> > > later kernel, 3.11)  with a possible fix proposed, see
> > > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1291459
> > >
> > > I can post lspci etc details if people want.
> > >
> > 
> > An updated version of the tar file is attached.
> > 
> > dmesg.1 is from 3.8.0-38 plus media-build modules and shows the
> > firmware loading issue.
> > The media-build HEAD revision was
> >   commit e4a8d40f63afa8b0276ea7758d9b4d32e64a964d
> >   Author: Hans Verkuil <[e-mail]>
> >   Date:   Wed Jun 18 10:27:51 2014 +0200
> > 
> > dmesg.2 is from 3.8.0-42 with the ubuntu-provided modules and does not
> > show the issue.
> > 
> > The issue occurs in later ubuntu kernels, 3.11 as noted previously
> > and 3.13.0-30.
> > 
> > The OS is ubuntu 12.04 LTS, amd64.
> > 
> > I looked into bisecting this but could not figure out a procedure
> > since the 'build' script tries really hard to use the latest
> > media-build and kernel sources. It looks like one has to run the
> > media-build 'make' against a checkout of the vanilla kernel that
> > roughly corresponds in time (or at least is not from a time later than
> > the current media-build revision that is checked out).
> 
> > 
> > 
> > Please respond this time
> 
> Next time, please add the logs directly at the email, as this makes
> clearer about what's the problem and what driver has the issues.
> 

Ok. I wanted to ensure it did not get mangled into unreadability
by the journey through various email systems.

> Anyway, based on this:
> 
> [   16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
> [   16.344378] cxusb: i2c wr: len=64 is too big!
> 
> I suspect that the enclosed patch should fix your issue. Please test. If it
> works, please reply to this email with:
> 	Tested-by: your name <your@email>
> 

The patch is working for me. My tested-by is inline below.
Test procedure:
- git checkout git://linuxtv.org/media_build.git
- cd media_build
- ./build --main-git
- grep "define MAX_XFER_SIZE" media/drivers/media/usb/dvb-usb/cxusb.c
#define MAX_XFER_SIZE  64
- vi media/drivers/media/usb/dvb-usb/cxusb.c
- grep "define MAX_XFER_SIZE" media/drivers/media/usb/dvb-usb/cxusb.c
#define MAX_XFER_SIZE  80
- cd media; make -C ../v4l; cd ..
- sudo make install
- sudo halt
- (after boot) dmesg
- try to tune one of the receivers - works ok
- dmesg

The final dmesg output is inline below.

> Cheers,
> Mauro
> 
> -
> 
> cxusb: increase buffer lenght to 80 bytes
> 
> As reported by Vincent:
> 	[   16.332247] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
> 	[   16.344378] cxusb: i2c wr: len=64 is too big!
> 
> 64 bytes is too short for firmware load on this device. So, increase it
> to 80 bytes.
> 
> Reported-by: Vincent McIntyre <[e-mail]>
> Signed-off-by: Mauro Carvalho Chehab <[e-mail]>

Tested-by: Vincent McIntyre <[e-mail]>

> 
> diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
> index 6acde5ee4324..a22726ccca64 100644
> --- a/drivers/media/usb/dvb-usb/cxusb.c
> +++ b/drivers/media/usb/dvb-usb/cxusb.c
> @@ -44,7 +44,7 @@
>  #include "atbm8830.h"
>  
>  /* Max transfer size done by I2C transfer functions */
> -#define MAX_XFER_SIZE  64
> +#define MAX_XFER_SIZE  80
>  
>  /* debug */
>  static int dvb_usb_cxusb_debug;
> 

Final dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-38-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #56~precise1-Ubuntu SMP Thu Mar 13 16:22:48 UTC 2014 (Ubuntu 3.8.0-38.56~precise1-generic 3.8.13.19)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-38-generic root=UUID=00d24ba0-1c1a-420b-a0de-e811e8a8b90c ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ed12fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ed13000-0x000000007ed14fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ed15000-0x000000007ee2dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ee2e000-0x000000007eee4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eee5000-0x000000007eee8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007eee9000-0x000000007eef2fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007eef3000-0x000000007eef3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007eef4000-0x000000007eefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007eeff000-0x000000007eefffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ef00000-0x000000007effffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI:                  /DG33BU, BIOS DPP3510J.86A.0293.2007.1002.1519 10/02/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ef00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F000000 mask FFF000000 uncachable
[    0.000000]   2 base 07EF00000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2032MB, range: 16MB, type UC
[    0.000000] reg 2, base: 2031MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2031M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2031MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2032MB, range: 16MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x7eefffff]
[    0.000000]  [mem 0x00000000-0x7edfffff] page 2M
[    0.000000]  [mem 0x7ee00000-0x7eefffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x7eefffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x35f4c000-0x36f9dfff]
[    0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[    0.000000] ACPI: RSDT 000000007eefd038 00060 (v01 INTEL  DG33BU   00000125      01000013)
[    0.000000] ACPI: FACP 000000007eefc000 00074 (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: DSDT 000000007eef8000 03D05 (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: FACS 000000007ee99000 00040
[    0.000000] ACPI: APIC 000000007eef7000 00078 (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: WDDT 000000007eef6000 00040 (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: MCFG 000000007eef5000 0003C (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: ASF! 000000007eef4000 000A6 (v32 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: DMAR 000000007eef2000 00128 (v01 INTEL  DG33BU   00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eef1000 00204 (v01 INTEL     CpuPm 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eef0000 00175 (v01 INTEL   Cpu0Ist 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeef000 00175 (v01 INTEL   Cpu1Ist 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeee000 00175 (v01 INTEL   Cpu2Ist 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeed000 00175 (v01 INTEL   Cpu3Ist 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeec000 000DD (v01 INTEL   Cpu0Cst 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeeb000 000DD (v01 INTEL   Cpu1Cst 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eeea000 000DD (v01 INTEL   Cpu2Cst 00000125 MSFT 01000013)
[    0.000000] ACPI: SSDT 000000007eee9000 000DD (v01 INTEL   Cpu3Cst 00000125 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007eefffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7eefffff]
[    0.000000]   NODE_DATA [mem 0x7ee29000-0x7ee2dfff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c400000-ffff88007e3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x7ed12fff]
[    0.000000]   node   0: [mem 0x7ed15000-0x7ee2dfff]
[    0.000000]   node   0: [mem 0x7eee5000-0x7eee8fff]
[    0.000000]   node   0: [mem 0x7eef3000-0x7eef3fff]
[    0.000000]   node   0: [mem 0x7eeff000-0x7eefffff]
[    0.000000] On node 0 totalpages: 519616
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8060 pages used for memmap
[    0.000000]   DMA32 zone: 507574 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000007ed13000 - 000000007ed15000
[    0.000000] PM: Registered nosave memory: 000000007ee2e000 - 000000007eee5000
[    0.000000] PM: Registered nosave memory: 000000007eee9000 - 000000007eef3000
[    0.000000] PM: Registered nosave memory: 000000007eef4000 - 000000007eeff000
[    0.000000] e820: [mem 0x7f000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ea00000 s84928 r8192 d21568 u524288
[    0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511486
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-38-generic root=UUID=00d24ba0-1c1a-420b-a0de-e811e8a8b90c ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at /build/buildd/linux-lts-raring-3.8.0/drivers/iommu/dmar.c:481 warn_invalid_dmar+0x8f/0xa0()
[    0.000000] Hardware name:         
[    0.000000] Your BIOS is broken; DMAR reported at address feb00000 returns all ones!
[    0.000000] BIOS vendor: Intel Corp.; Ver: DPP3510J.86A.0293.2007.1002.1519; Product Version:         
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 3.8.0-38-generic #56~precise1-Ubuntu
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81059bef>] warn_slowpath_common+0x7f/0xc0
[    0.000000]  [<ffffffff81059c8f>] warn_slowpath_fmt_taint+0x3f/0x50
[    0.000000]  [<ffffffff81d1de43>] ? __early_set_fixmap+0x96/0x9d
[    0.000000]  [<ffffffff815bbf1f>] warn_invalid_dmar+0x8f/0xa0
[    0.000000]  [<ffffffff81d1e2ac>] ? early_iounmap+0xe4/0x12e
[    0.000000]  [<ffffffff81d46c08>] check_zero_address+0xc8/0xf7
[    0.000000]  [<ffffffff817033b1>] ? bad_to_user+0x7bb/0x7bb
[    0.000000]  [<ffffffff81d46c4e>] detect_intel_iommu+0x17/0xb8
[    0.000000]  [<ffffffff81d0f6c9>] pci_iommu_alloc+0x44/0x6e
[    0.000000]  [<ffffffff81d1dc06>] mem_init+0x19/0xec
[    0.000000]  [<ffffffff816db6fb>] ? set_nmi_gate+0x48/0x4a
[    0.000000]  [<ffffffff81d06a61>] start_kernel+0x1e3/0x3de
[    0.000000]  [<ffffffff81d067ff>] ? pass_bootoption.constprop.3+0xd3/0xd3
[    0.000000]  [<ffffffff81d06397>] x86_64_start_reservations+0x131/0x135
[    0.000000]  [<ffffffff81d06120>] ? early_idt_handlers+0x120/0x120
[    0.000000]  [<ffffffff81d06468>] x86_64_start_kernel+0xcd/0xdc
[    0.000000] ---[ end trace eed57aae45f200ef ]---
[    0.000000] Memory: 2012692k/2079744k available (7180k kernel code, 1280k absent, 65772k reserved, 6063k data, 1016k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2332.895 MHz processor
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4665.79 BogoMIPS (lpj=9331580)
[    0.004112] pid_max: default: 32768 minimum: 301
[    0.004192] Security Framework initialized
[    0.004260] AppArmor: AppArmor initialized
[    0.004311] Yama: becoming mindful.
[    0.008049] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009069] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.009599] Mount-cache hash table entries: 256
[    0.009872] Initializing cgroup subsys cpuacct
[    0.009927] Initializing cgroup subsys memory
[    0.009987] Initializing cgroup subsys devices
[    0.010040] Initializing cgroup subsys freezer
[    0.010093] Initializing cgroup subsys blkio
[    0.010145] Initializing cgroup subsys perf_event
[    0.010200] Initializing cgroup subsys hugetlb
[    0.010280] CPU: Physical Processor ID: 0
[    0.010331] CPU: Processor Core ID: 0
[    0.010383] mce: CPU supports 6 MCE banks
[    0.010442] CPU0: Thermal monitoring enabled (TM2)
[    0.010498] process: using mwait in idle threads
[    0.010554] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.010554] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.010554] tlb_flushall_shift: -1
[    0.010760] Freeing SMP alternatives: 24k freed
[    0.013429] ACPI: Core revision 20121018
[    0.019044] ftrace: allocating 29410 entries in 115 pages
[    0.028112] dmar: Host address width 36
[    0.028168] dmar: DRHD base: 0x000000feb00000 flags: 0x0
[    0.028230] dmar: IOMMU: failed to map dmar0
[    0.028282] dmar: parse DMAR table failure.
[    0.028682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070135] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (fam: 06, model: 0f, stepping: 0b)
[    0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] perf_event_intel: PEBS disabled due to CPU errata
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] smpboot: Booting Node   0, Processors  #1
[    0.082915] Brought up 2 CPUs
[    0.083016] smpboot: Total of 2 processors activated (9331.58 BogoMIPS)
[    0.083168] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084100] devtmpfs: initialized
[    0.085025] EVM: security.selinux
[    0.085076] EVM: security.SMACK64
[    0.085127] EVM: security.capability
[    0.085189] PM: Registering ACPI NVS region [mem 0x7ee2e000-0x7eee4fff] (749568 bytes)
[    0.085189] regulator-dummy: no parameters
[    0.085274] NET: Registered protocol family 16
[    0.085464] ACPI: bus type pci registered
[    0.088057] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.088132] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.102851] PCI: Using configuration type 1 for base access
[    0.103798] bio: create slab <bio-0> at 0
[    0.103798] ACPI: Added _OSI(Module Device)
[    0.103798] ACPI: Added _OSI(Processor Device)
[    0.103798] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.103798] ACPI: Added _OSI(Processor Aggregator Device)
[    0.103798] ACPI: EC: Look up EC in DSDT
[    0.103798] ACPI: Interpreter enabled
[    0.103798] ACPI: (supports S0 S1 S3 S4 S5)
[    0.104186] ACPI: Using IOAPIC for interrupt routing
[    0.107398] ACPI: No dock devices found.
[    0.107452] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.108119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.108176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.109368] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.109371] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.109374] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.109376] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
[    0.109379] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored)
[    0.109381] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
[    0.109383] PCI: root bus 00: using default resources
[    0.109386] pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.109487] PCI host bridge to bus 0000:00
[    0.109540] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.109595] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.109651] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.109716] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.109756] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.109793] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.109810] pci 0000:00:03.0: [8086:29c4] type 00 class 0x078000
[    0.109824] pci 0000:00:03.0: reg 10: [mem 0x93326100-0x9332610f 64bit]
[    0.109865] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.109906] pci 0000:00:19.0: [8086:294c] type 00 class 0x020000
[    0.109923] pci 0000:00:19.0: reg 10: [mem 0x93300000-0x9331ffff]
[    0.109931] pci 0000:00:19.0: reg 14: [mem 0x93324000-0x93324fff]
[    0.109939] pci 0000:00:19.0: reg 18: [io  0x4400-0x441f]
[    0.109996] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.110015] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.110054] pci 0000:00:1a.0: reg 20: [io  0x40e0-0x40ff]
[    0.110101] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.110140] pci 0000:00:1a.1: reg 20: [io  0x40c0-0x40df]
[    0.110187] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.110226] pci 0000:00:1a.2: reg 20: [io  0x40a0-0x40bf]
[    0.110283] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.110303] pci 0000:00:1a.7: reg 10: [mem 0x93325c00-0x93325fff]
[    0.110386] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.110410] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.110424] pci 0000:00:1b.0: reg 10: [mem 0x93320000-0x93323fff 64bit]
[    0.110485] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.110505] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.110567] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.110589] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.110651] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.110672] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.110734] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.110755] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.110817] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.110839] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.110901] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.110925] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.110963] pci 0000:00:1d.0: reg 20: [io  0x4080-0x409f]
[    0.111012] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.111051] pci 0000:00:1d.1: reg 20: [io  0x4060-0x407f]
[    0.111099] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.111137] pci 0000:00:1d.2: reg 20: [io  0x4040-0x405f]
[    0.111193] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.111213] pci 0000:00:1d.7: reg 10: [mem 0x93325800-0x93325bff]
[    0.111295] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.111316] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.111373] pci 0000:00:1f.0: [8086:2912] type 00 class 0x060100
[    0.111448] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.111521] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[    0.111636] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.111653] pci 0000:00:1f.2: reg 10: [io  0x4428-0x442f]
[    0.111661] pci 0000:00:1f.2: reg 14: [io  0x4434-0x4437]
[    0.111668] pci 0000:00:1f.2: reg 18: [io  0x4420-0x4427]
[    0.111676] pci 0000:00:1f.2: reg 1c: [io  0x4430-0x4433]
[    0.111683] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.111691] pci 0000:00:1f.2: reg 24: [mem 0x93325000-0x933257ff]
[    0.111733] pci 0000:00:1f.2: PME# supported from D3hot
[    0.111750] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.111764] pci 0000:00:1f.3: reg 10: [mem 0x93326000-0x933260ff 64bit]
[    0.111783] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.111840] pci 0000:01:00.0: [10de:0f00] type 00 class 0x030000
[    0.111850] pci 0000:01:00.0: reg 10: [mem 0x92000000-0x92ffffff]
[    0.111860] pci 0000:01:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.111870] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref]
[    0.111878] pci 0000:01:00.0: reg 24: [io  0x3000-0x307f]
[    0.111885] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.111939] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.111949] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x93003fff]
[    0.112047] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.112102] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.112105] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.112110] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.112145] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.112202] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x934fffff]
[    0.112258] pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f
[    0.112273] pci 0000:03:00.0: reg 10: [io  0x2018-0x201f]
[    0.112285] pci 0000:03:00.0: reg 14: [io  0x2024-0x2027]
[    0.112297] pci 0000:03:00.0: reg 18: [io  0x2010-0x2017]
[    0.112308] pci 0000:03:00.0: reg 1c: [io  0x2020-0x2023]
[    0.112320] pci 0000:03:00.0: reg 20: [io  0x2000-0x200f]
[    0.112332] pci 0000:03:00.0: reg 24: [mem 0x93200000-0x932001ff]
[    0.112394] pci 0000:03:00.0: supports D1
[    0.112396] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.112416] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.112497] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.112552] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.112556] pci 0000:00:1c.1:   bridge window [mem 0x93200000-0x932fffff]
[    0.112595] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.112652] pci 0000:00:1c.2:   bridge window [mem 0x93500000-0x935fffff]
[    0.112691] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.112748] pci 0000:00:1c.3:   bridge window [mem 0x93600000-0x936fffff]
[    0.112786] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.112843] pci 0000:00:1c.4:   bridge window [mem 0x93700000-0x937fffff]
[    0.112875] pci 0000:07:00.0: [1106:3038] type 00 class 0x0c0300
[    0.112919] pci 0000:07:00.0: reg 20: [io  0x1040-0x105f]
[    0.112960] pci 0000:07:00.0: supports D1 D2
[    0.112962] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
[    0.112981] pci 0000:07:00.2: [1106:3104] type 00 class 0x0c0320
[    0.112997] pci 0000:07:00.2: reg 10: [mem 0x93104900-0x931049ff]
[    0.113066] pci 0000:07:00.2: supports D1 D2
[    0.113068] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[    0.113091] pci 0000:07:01.0: [1106:3038] type 00 class 0x0c0300
[    0.113135] pci 0000:07:01.0: reg 20: [io  0x1020-0x103f]
[    0.113175] pci 0000:07:01.0: supports D1 D2
[    0.113178] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113195] pci 0000:07:01.1: [1106:3038] type 00 class 0x0c0300
[    0.113239] pci 0000:07:01.1: reg 20: [io  0x1000-0x101f]
[    0.113279] pci 0000:07:01.1: supports D1 D2
[    0.113282] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113299] pci 0000:07:01.2: [1106:3104] type 00 class 0x0c0320
[    0.113315] pci 0000:07:01.2: reg 10: [mem 0x93104800-0x931048ff]
[    0.113383] pci 0000:07:01.2: supports D1 D2
[    0.113386] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.113410] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
[    0.113427] pci 0000:07:03.0: reg 10: [mem 0x93104000-0x931047ff]
[    0.113437] pci 0000:07:03.0: reg 14: [mem 0x93100000-0x93103fff]
[    0.113502] pci 0000:07:03.0: supports D1 D2
[    0.113504] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[    0.113545] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.113604] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.113608] pci 0000:00:1e.0:   bridge window [mem 0x93100000-0x931fffff]
[    0.113613] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.113616] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.113646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.113745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.113780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.113813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.113847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.113883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.113950]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.114022]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.115348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.115763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[    0.116185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.116596] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.117006] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[    0.117420] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
[    0.117830] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[    0.118241] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.120017] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.120090] vgaarb: loaded
[    0.120140] vgaarb: bridge control possible 0000:01:00.0
[    0.120393] SCSI subsystem initialized
[    0.120445] ACPI: bus type scsi registered
[    0.120505] libata version 3.00 loaded.
[    0.120505] ACPI: bus type usb registered
[    0.120505] usbcore: registered new interface driver usbfs
[    0.120505] usbcore: registered new interface driver hub
[    0.120505] usbcore: registered new device driver usb
[    0.120505] PCI: Using ACPI for IRQ routing
[    0.122208] PCI: pci_cache_line_size set to 64 bytes
[    0.122290] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.122295] e820: reserve RAM buffer [mem 0x7ed13000-0x7fffffff]
[    0.122297] e820: reserve RAM buffer [mem 0x7ee2e000-0x7fffffff]
[    0.122299] e820: reserve RAM buffer [mem 0x7eee9000-0x7fffffff]
[    0.122301] e820: reserve RAM buffer [mem 0x7eef4000-0x7fffffff]
[    0.122303] e820: reserve RAM buffer [mem 0x7ef00000-0x7fffffff]
[    0.122390] NetLabel: Initializing
[    0.122440] NetLabel:  domain hash size = 128
[    0.122492] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.122555] NetLabel:  unlabeled traffic allowed by default
[    0.124033] Switching to clocksource refined-jiffies
[    0.129247] AppArmor: AppArmor Filesystem Enabled
[    0.129331] pnp: PnP ACPI init
[    0.129395] ACPI: bus type pnp registered
[    0.129535] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.129593] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
[    0.129650] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.129707] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.129764] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.129821] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.129878] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.129935] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.129992] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
[    0.130049] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.130107] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.130164] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.130223] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130350] pnp 00:01: [dma 4]
[    0.130371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.130406] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.130437] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.130463] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.130511] system 00:05: [io  0x0500-0x053f] has been reserved
[    0.130567] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.130623] system 00:05: [io  0x0680-0x06ff] has been reserved
[    0.130680] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130755] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131091] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.131142] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.131188] pnp: PnP ACPI: found 9 devices
[    0.131240] ACPI: ACPI bus type pnp unregistered
[    0.137231] Switching to clocksource acpi_pm
[    0.140001] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.140001] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.140001] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.140001] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.140001] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.140001] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.140001] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.140001] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[    0.140001] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.140001] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[    0.140001] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140001] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140001] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140001] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140001] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140001] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.140001] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.140001] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.140001] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.140001] pci 0000:00:1c.0: BAR 15: assigned [mem 0x93800000-0x939fffff 64bit pref]
[    0.140001] pci 0000:00:1c.1: BAR 15: assigned [mem 0x93a00000-0x93bfffff 64bit pref]
[    0.140001] pci 0000:00:1c.2: BAR 15: assigned [mem 0x93c00000-0x93dfffff 64bit pref]
[    0.140001] pci 0000:00:1c.3: BAR 15: assigned [mem 0x93e00000-0x93ffffff 64bit pref]
[    0.140001] pci 0000:00:1c.4: BAR 15: assigned [mem 0x94000000-0x941fffff 64bit pref]
[    0.140001] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.140001] pci 0000:00:1c.2: BAR 13: assigned [io  0x6000-0x6fff]
[    0.140001] pci 0000:00:1c.3: BAR 13: assigned [io  0x7000-0x7fff]
[    0.140001] pci 0000:00:1c.4: BAR 13: assigned [io  0x8000-0x8fff]
[    0.140001] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref]
[    0.140001] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.140001] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.140001] pci 0000:00:01.0:   bridge window [mem 0x92000000-0x930fffff]
[    0.140001] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[    0.140001] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.140001] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.140001] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x934fffff]
[    0.140001] pci 0000:00:1c.0:   bridge window [mem 0x93800000-0x939fffff 64bit pref]
[    0.140001] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.140001] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.140001] pci 0000:00:1c.1:   bridge window [mem 0x93200000-0x932fffff]
[    0.140001] pci 0000:00:1c.1:   bridge window [mem 0x93a00000-0x93bfffff 64bit pref]
[    0.140001] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.140001] pci 0000:00:1c.2:   bridge window [io  0x6000-0x6fff]
[    0.140001] pci 0000:00:1c.2:   bridge window [mem 0x93500000-0x935fffff]
[    0.140001] pci 0000:00:1c.2:   bridge window [mem 0x93c00000-0x93dfffff 64bit pref]
[    0.140001] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.140001] pci 0000:00:1c.3:   bridge window [io  0x7000-0x7fff]
[    0.140001] pci 0000:00:1c.3:   bridge window [mem 0x93600000-0x936fffff]
[    0.140001] pci 0000:00:1c.3:   bridge window [mem 0x93e00000-0x93ffffff 64bit pref]
[    0.140001] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.140001] pci 0000:00:1c.4:   bridge window [io  0x8000-0x8fff]
[    0.140001] pci 0000:00:1c.4:   bridge window [mem 0x93700000-0x937fffff]
[    0.140001] pci 0000:00:1c.4:   bridge window [mem 0x94000000-0x941fffff 64bit pref]
[    0.140001] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.140001] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.140001] pci 0000:00:1e.0:   bridge window [mem 0x93100000-0x931fffff]
[    0.140001] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.140001] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.140001] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.142722] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[    0.142784] pci 0000:00:1e.0: setting latency timer to 64
[    0.142788] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.142790] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.142793] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.142795] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff]
[    0.142798] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[    0.142800] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.142802] pci_bus 0000:02: resource 1 [mem 0x93400000-0x934fffff]
[    0.142805] pci_bus 0000:02: resource 2 [mem 0x93800000-0x939fffff 64bit pref]
[    0.142807] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.142809] pci_bus 0000:03: resource 1 [mem 0x93200000-0x932fffff]
[    0.142812] pci_bus 0000:03: resource 2 [mem 0x93a00000-0x93bfffff 64bit pref]
[    0.142814] pci_bus 0000:04: resource 0 [io  0x6000-0x6fff]
[    0.142816] pci_bus 0000:04: resource 1 [mem 0x93500000-0x935fffff]
[    0.142819] pci_bus 0000:04: resource 2 [mem 0x93c00000-0x93dfffff 64bit pref]
[    0.142821] pci_bus 0000:05: resource 0 [io  0x7000-0x7fff]
[    0.142823] pci_bus 0000:05: resource 1 [mem 0x93600000-0x936fffff]
[    0.142826] pci_bus 0000:05: resource 2 [mem 0x93e00000-0x93ffffff 64bit pref]
[    0.142828] pci_bus 0000:06: resource 0 [io  0x8000-0x8fff]
[    0.142830] pci_bus 0000:06: resource 1 [mem 0x93700000-0x937fffff]
[    0.142833] pci_bus 0000:06: resource 2 [mem 0x94000000-0x941fffff 64bit pref]
[    0.142835] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.142837] pci_bus 0000:07: resource 1 [mem 0x93100000-0x931fffff]
[    0.142840] pci_bus 0000:07: resource 4 [io  0x0000-0xffff]
[    0.142842] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
[    0.142877] NET: Registered protocol family 2
[    0.143084] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.143269] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.143420] TCP: Hash tables configured (established 16384 bind 16384)
[    0.143513] TCP: reno registered
[    0.143568] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.143640] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.143752] NET: Registered protocol family 1
[    0.144217] pci 0000:01:00.0: Boot video device
[    0.144323] PCI: CLS 64 bytes, default 64
[    0.144366] Trying to unpack rootfs image as initramfs...
[    0.443923] Freeing initrd memory: 16712k freed
[    0.450346] Initialise module verification
[    0.450452] audit: initializing netlink socket (disabled)
[    0.450519] type=2000 audit(1404393012.447:1): initialized
[    0.480880] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.482565] VFS: Disk quotas dquot_6.5.2
[    0.483767] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.484367] fuse init (API version 7.20)
[    0.484499] msgmni has been set to 3963
[    0.484985] Key type asymmetric registered
[    0.485039] Asymmetric key parser 'x509' registered
[    0.485124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.485225] io scheduler noop registered
[    0.485279] io scheduler deadline registered (default)
[    0.485336] io scheduler cfq registered
[    0.485528] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.485599] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.485681] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.485760] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.485839] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.485916] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.485985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.486053] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.486157] intel_idle: does not run on family 6 model 15
[    0.486233] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.486309] ACPI: Sleep Button [SLPB]
[    0.486407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.486478] ACPI: Power Button [PWRF]
[    0.486608] ACPI: Requesting acpi_cpufreq
[    0.486869] Monitor-Mwait will be used to enter C-1 state
[    0.488984] GHES: HEST is not enabled!
[    0.489117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.509526] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.510880] Linux agpgart interface v0.103
[    0.512307] brd: module loaded
[    0.513049] loop: module loaded
[    0.513460] libphy: Fixed MDIO Bus: probed
[    0.513579] tun: Universal TUN/TAP device driver, 1.6
[    0.513633] tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
[    0.513727] PPP generic driver version 2.4.2
[    0.513833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.513889] ehci-pci: EHCI PCI platform driver
[    0.513974] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.513978] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.514038] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.514119] ehci-pci 0000:00:1a.7: debug port 1
[    0.518064] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.518081] ehci-pci 0000:00:1a.7: irq 17, io mem 0x93325c00
[    0.528026] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.528104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.528162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.528234] usb usb1: Product: EHCI Host Controller
[    0.528293] usb usb1: Manufacturer: Linux 3.8.0-38-generic ehci_hcd
[    0.528349] usb usb1: SerialNumber: 0000:00:1a.7
[    0.528492] hub 1-0:1.0: USB hub found
[    0.528547] hub 1-0:1.0: 6 ports detected
[    0.528714] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.528718] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.528775] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.528855] ehci-pci 0000:00:1d.7: debug port 1
[    0.532807] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.532820] ehci-pci 0000:00:1d.7: irq 23, io mem 0x93325800
[    0.544030] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.544117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.544176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.544253] usb usb2: Product: EHCI Host Controller
[    0.544306] usb usb2: Manufacturer: Linux 3.8.0-38-generic ehci_hcd
[    0.544362] usb usb2: SerialNumber: 0000:00:1d.7
[    0.544497] hub 2-0:1.0: USB hub found
[    0.544551] hub 2-0:1.0: 6 ports detected
[    0.544714] ehci-pci 0000:07:00.2: EHCI Host Controller
[    0.544772] ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 3
[    0.544869] ehci-pci 0000:07:00.2: irq 23, io mem 0x93104900
[    0.556031] ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00
[    0.556105] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.556163] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.556240] usb usb3: Product: EHCI Host Controller
[    0.556294] usb usb3: Manufacturer: Linux 3.8.0-38-generic ehci_hcd
[    0.556350] usb usb3: SerialNumber: 0000:07:00.2
[    0.556485] hub 3-0:1.0: USB hub found
[    0.556539] hub 3-0:1.0: 2 ports detected
[    0.556663] ehci-pci 0000:07:01.2: EHCI Host Controller
[    0.556721] ehci-pci 0000:07:01.2: new USB bus registered, assigned bus number 4
[    0.556824] ehci-pci 0000:07:01.2: irq 20, io mem 0x93104800
[    0.568031] ehci-pci 0000:07:01.2: USB 2.0 started, EHCI 1.00
[    0.568113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.568172] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.568249] usb usb4: Product: EHCI Host Controller
[    0.568302] usb usb4: Manufacturer: Linux 3.8.0-38-generic ehci_hcd
[    0.568358] usb usb4: SerialNumber: 0000:07:01.2
[    0.568493] hub 4-0:1.0: USB hub found
[    0.568547] hub 4-0:1.0: 4 ports detected
[    0.568678] ehci-platform: EHCI generic platform driver
[    0.568739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.568809] uhci_hcd: USB Universal Host Controller Interface driver
[    0.568881] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.568884] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.568942] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    0.569039] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040e0
[    0.569120] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.569178] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.569248] usb usb5: Product: UHCI Host Controller
[    0.569302] usb usb5: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.569358] usb usb5: SerialNumber: 0000:00:1a.0
[    0.569493] hub 5-0:1.0: USB hub found
[    0.569547] hub 5-0:1.0: 2 ports detected
[    0.569668] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.569671] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.569728] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    0.569825] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[    0.569908] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.569965] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.570036] usb usb6: Product: UHCI Host Controller
[    0.570089] usb usb6: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.570145] usb usb6: SerialNumber: 0000:00:1a.1
[    0.570276] hub 6-0:1.0: USB hub found
[    0.570330] hub 6-0:1.0: 2 ports detected
[    0.570454] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.570458] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.570515] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    0.570604] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000040a0
[    0.570687] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.570745] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.570815] usb usb7: Product: UHCI Host Controller
[    0.570869] usb usb7: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.570925] usb usb7: SerialNumber: 0000:00:1a.2
[    0.571062] hub 7-0:1.0: USB hub found
[    0.571116] hub 7-0:1.0: 2 ports detected
[    0.571235] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.571238] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.571295] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    0.571384] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    0.571466] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.571524] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.571594] usb usb8: Product: UHCI Host Controller
[    0.571648] usb usb8: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.571704] usb usb8: SerialNumber: 0000:00:1d.0
[    0.571832] hub 8-0:1.0: USB hub found
[    0.571886] hub 8-0:1.0: 2 ports detected
[    0.572017] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.572020] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.572088] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    0.572185] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    0.572266] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    0.572323] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.572394] usb usb9: Product: UHCI Host Controller
[    0.572447] usb usb9: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.572503] usb usb9: SerialNumber: 0000:00:1d.1
[    0.572637] hub 9-0:1.0: USB hub found
[    0.572691] hub 9-0:1.0: 2 ports detected
[    0.572813] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.572816] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.572873] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    0.572962] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    0.573043] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    0.573101] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.573171] usb usb10: Product: UHCI Host Controller
[    0.573225] usb usb10: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.573281] usb usb10: SerialNumber: 0000:00:1d.2
[    0.573412] hub 10-0:1.0: USB hub found
[    0.573466] hub 10-0:1.0: 2 ports detected
[    0.573587] uhci_hcd 0000:07:00.0: UHCI Host Controller
[    0.573644] uhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11
[    0.573735] uhci_hcd 0000:07:00.0: irq 21, io base 0x00001040
[    0.573817] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[    0.573874] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.573945] usb usb11: Product: UHCI Host Controller
[    0.573999] usb usb11: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.574055] usb usb11: SerialNumber: 0000:07:00.0
[    0.574185] hub 11-0:1.0: USB hub found
[    0.574239] hub 11-0:1.0: 2 ports detected
[    0.574361] uhci_hcd 0000:07:01.0: UHCI Host Controller
[    0.574420] uhci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 12
[    0.574519] uhci_hcd 0000:07:01.0: irq 22, io base 0x00001020
[    0.574601] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001
[    0.574658] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.574729] usb usb12: Product: UHCI Host Controller
[    0.575893] usb usb12: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.575949] usb usb12: SerialNumber: 0000:07:01.0
[    0.576093] hub 12-0:1.0: USB hub found
[    0.576147] hub 12-0:1.0: 2 ports detected
[    0.576266] uhci_hcd 0000:07:01.1: UHCI Host Controller
[    0.576324] uhci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 13
[    0.576413] uhci_hcd 0000:07:01.1: irq 21, io base 0x00001000
[    0.576495] usb usb13: New USB device found, idVendor=1d6b, idProduct=0001
[    0.576553] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.576623] usb usb13: Product: UHCI Host Controller
[    0.576677] usb usb13: Manufacturer: Linux 3.8.0-38-generic uhci_hcd
[    0.576733] usb usb13: SerialNumber: 0000:07:01.1
[    0.576868] hub 13-0:1.0: USB hub found
[    0.576922] hub 13-0:1.0: 2 ports detected
[    0.577093] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.580293] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.580353] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.580514] mousedev: PS/2 mouse device common for all mice
[    0.580688] rtc_cmos 00:02: RTC can wake from S4
[    0.580844] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.580918] rtc0: alarms up to one month, 114 bytes nvram
[    0.581060] device-mapper: uevent: version 1.0.3
[    0.581171] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [e-mail]
[    0.581249] cpuidle: using governor ladder
[    0.581301] cpuidle: using governor menu
[    0.581354] ledtrig-cpu: registered to indicate activity on CPUs
[    0.581409] EFI Variables Facility v0.08 2004-May-17
[    0.581649] ashmem: initialized
[    0.581811] TCP: cubic registered
[    0.581963] NET: Registered protocol family 10
[    0.582186] NET: Registered protocol family 17
[    0.582249] Key type dns_resolver registered
[    0.582492] Loading module verification certificates
[    0.583614] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a3011e4e8f874734b1f26672fda04dadcdf86f9b'
[    0.583700] registered taskstats version 1
[    0.585890] Key type trusted registered
[    0.587739] Key type encrypted registered
[    0.590005] rtc_cmos 00:02: setting system clock to 2014-07-03 13:10:12 UTC (1404393012)
[    0.590296] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.590352] EDD information not available.
[    0.592187] Freeing unused kernel memory: 1016k freed
[    0.592488] Write protecting the kernel read-only data: 12288k
[    0.595758] Freeing unused kernel memory: 1000k freed
[    0.599067] Freeing unused kernel memory: 952k freed
[    0.614187] udevd[95]: starting version 175
[    0.665256] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[    0.665317] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    0.665410] e1000e 0000:00:19.0: setting latency timer to 64
[    0.665484] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.665591] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[    0.674630] scsi0 : pata_marvell
[    0.679201] scsi1 : pata_marvell
[    0.679308] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
[    0.679366] ata2: DUMMY
[    0.764071] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    0.900049] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    0.969975] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:22:1d:46
[    0.970049] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.970126] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF
[    0.970207] ahci 0000:00:1f.2: version 3.0
[    0.970266] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.970344] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.970421] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems 
[    0.970505] ahci 0000:00:1f.2: setting latency timer to 64
[    1.008545] scsi2 : ahci
[    1.008674] scsi3 : ahci
[    1.008790] scsi4 : ahci
[    1.008906] scsi5 : ahci
[    1.009021] scsi6 : ahci
[    1.009131] scsi7 : ahci
[    1.009250] ata3: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325100 irq 47
[    1.009321] ata4: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325180 irq 47
[    1.009392] ata5: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325200 irq 47
[    1.009463] ata6: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325280 irq 47
[    1.009533] ata7: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325300 irq 47
[    1.009604] ata8: SATA max UDMA/133 abar m2048@0x93325000 port 0x93325380 irq 47
[    1.032438] usb 1-2: New USB device found, idVendor=0424, idProduct=2514
[    1.032497] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.032710] hub 1-2:1.0: USB hub found
[    1.032807] hub 1-2:1.0: 4 ports detected
[    1.264102] firewire_core 0000:07:03.0: created device fw0: GUID 0090270001fd63fb, S400
[    1.328056] ata5: SATA link down (SStatus 0 SControl 300)
[    1.328125] ata6: SATA link down (SStatus 0 SControl 300)
[    1.448056] tsc: Refined TSC clocksource calibration: 2333.067 MHz
[    1.448116] Switching to clocksource tsc
[    1.500023] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.500091] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.500156] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.500660] ata7.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133
[    1.500720] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.500837] ata3.00: ATA-9: WDC WD30EURS-73TLHY0, 80.00A80, max UDMA/133
[    1.500895] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.501319] ata7.00: configured for UDMA/133
[    1.501486] ata3.00: configured for UDMA/133
[    1.501646] scsi 2:0:0:0: Direct-Access     ATA      WDC WD30EURS-73T 80.0 PQ: 0 ANSI: 5
[    1.501856] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    1.501881] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.501990] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.502086] sd 2:0:0:0: [sda] Write Protect is off
[    1.502140] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.502159] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.511315] ata8.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
[    1.511373] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.512036] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.521701] ata8.00: configured for UDMA/133
[    1.586356]  sda: sda1
[    1.586615] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.654195] usb 3-1: New USB device found, idVendor=0413, idProduct=6f12
[    1.654255] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.654315] usb 3-1: Product: WinFast DTV2000 DS Plus
[    1.654371] usb 3-1: Manufacturer: Realtek
[    1.668028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.669485] ata4.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.13, max UDMA/66
[    1.671002] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
[    1.695129] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215  1.13 PQ: 0 ANSI: 5
[    1.713124] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.713197] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.713361] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.713420] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.713609] scsi 6:0:0:0: Direct-Access     ATA      WDC WD30EURS-73T 80.0 PQ: 0 ANSI: 5
[    1.713786] sd 6:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    1.713860] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    1.713940] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    1.713966] sd 6:0:0:0: [sdb] Write Protect is off
[    1.713968] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.713988] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.714218] scsi 7:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
[    1.714405] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    1.714495] sd 7:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.714644] sd 7:0:0:0: [sdc] Write Protect is off
[    1.714700] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.714724] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.716464]  sdc: sdc1 sdc2
[    1.716788] sd 7:0:0:0: [sdc] Attached SCSI disk
[    1.768030] usb 3-2: new high-speed USB device number 3 using ehci-pci
[    1.796618]  sdb: sdb1
[    1.796900] sd 6:0:0:0: [sdb] Attached SCSI disk
[    1.956154] bio: create slab <bio-1> at 1
[    1.990243] usb 3-2: New USB device found, idVendor=0413, idProduct=6f12
[    1.990306] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.990367] usb 3-2: Product: WinFast DTV2000 DS Plus
[    1.990434] usb 3-2: Manufacturer: Realtek
[    2.104084] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.237868] usb 4-1: New USB device found, idVendor=0fe9, idProduct=db78
[    2.237933] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    2.238007] usb 4-1: Product: Bluebird
[    2.238061] usb 4-1: Manufacturer: Dvico
[    2.238115] usb 4-1: SerialNumber: 0000827b
[    2.348033] usb 4-2: new high-speed USB device number 3 using ehci-pci
[    2.522028] usb 4-2: New USB device found, idVendor=0fe9, idProduct=db78
[    2.522090] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    2.522152] usb 4-2: Product: Bluebird
[    2.522206] usb 4-2: Manufacturer: Dvico
[    2.522266] usb 4-2: SerialNumber: 0000027b
[    2.760025] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    2.936126] usb 5-1: New USB device found, idVendor=413c, idProduct=2107
[    2.937303] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.937361] usb 5-1: Product: Dell USB Entry Keyboard
[    2.937417] usb 5-1: Manufacturer: Dell
[    2.961178] usbcore: registered new interface driver usbhid
[    2.961240] usbhid: USB HID core driver
[    2.964344] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/input/input2
[    2.964853] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1a.0-1/input0
[    3.180036] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    3.361915] usb 6-2: New USB device found, idVendor=045e, idProduct=0040
[    3.361976] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.362035] usb 6-2: Product: Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae
[    3.362092] usb 6-2: Manufacturer: Microsoft
[    3.380238] input: Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:1a.1/usb6/6-2/6-2:1.0/input/input3
[    3.380410] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:1a.1-2/input0
[    3.824028] usb 10-1: new low-speed USB device number 2 using uhci_hcd
[    3.979052] usb 10-1: New USB device found, idVendor=15c2, idProduct=ffdc
[    3.979113] usb 10-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.839872] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    6.943823] init: ureadahead main process (347) terminated with status 5
[    7.039423] Adding 3903484k swap on /dev/mapper/welly-swap.  Priority:-1 extents:1 across:3903484k SS
[    7.046386] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.055036] udevd[480]: starting version 175
[    7.091836] lp: driver loaded but no devices found
[    7.143105] mei 0000:00:03.0: setting latency timer to 64
[    7.143150] mei 0000:00:03.0: irq 48 for MSI/MSI-X
[    7.213541] Disabling lock debugging due to kernel taint
[    7.213910] WARNING: You are using an experimental version of the media stack.
[    7.213910] 	As the driver is backported to an older kernel, it doesn't offer
[    7.213910] 	enough quality for its usage in production.
[    7.213910] 	Use it with care.
[    7.213910] Latest git patches (needed if you report a bug to [e-mail]):
[    7.213910] 	b5b620584b9c4644b85e932895a742e0c192d66c [media] technisat-sub2: Fix stream curruption on high bitrate
[    7.213910] 	1fe3a8fe494463cfe2556a25ae41a1499725c178 [media] au0828: don't hardcode height/width
[    7.213910] 	64ea37bbd8a5815522706f0099ad3f11c7537e15 [media] au0828: Only alt setting logic when needed
[    7.216664] input: iMON Panel, Knob and Mouse(15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input4
[    7.240022] imon 10-1:1.0: 0xffdc iMON LCD, MCE IR
[    7.240026]  (id 0x9f)
[    7.264168] nvidia: module license 'NVIDIA' taints kernel.
[    7.283068] Registered IR keymap rc-imon-mce
[    7.283251] input: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/rc/rc0/input5
[    7.283303] rc0: iMON Remote (15c2:ffdc) as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/rc/rc0
[    7.283732] type=1400 audit(1404393019.186:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=583 comm="apparmor_parser"
[    7.284167] type=1400 audit(1404393019.190:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
[    7.284398] type=1400 audit(1404393019.190:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
[    7.293733] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.294067] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.116  Mon Oct 28 20:39:03 PDT 2013
[    7.294708] type=1400 audit(1404393019.198:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=594 comm="apparmor_parser"
[    7.296981] imon 10-1:1.0: iMON device (15c2:ffdc, intf0) on usb<10:2> initialized
[    7.297028] usbcore: registered new interface driver imon
[    7.312794] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20121018/utaddress-251)
[    7.312802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.342291] WARNING: You are using an experimental version of the media stack.
[    7.342291] 	As the driver is backported to an older kernel, it doesn't offer
[    7.342291] 	enough quality for its usage in production.
[    7.342291] 	Use it with care.
[    7.342291] Latest git patches (needed if you report a bug to [e-mail]):
[    7.342291] 	b5b620584b9c4644b85e932895a742e0c192d66c [media] technisat-sub2: Fix stream curruption on high bitrate
[    7.342291] 	1fe3a8fe494463cfe2556a25ae41a1499725c178 [media] au0828: don't hardcode height/width
[    7.342291] 	64ea37bbd8a5815522706f0099ad3f11c7537e15 [media] au0828: Only alt setting logic when needed
[    7.346769] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state.
[    7.347003] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.378165] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4)
[    7.428051] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3
[    7.430814] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[    7.456089] hda_codec: ALC888: SKU not ready 0x411111f0
[    7.486670] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.487458] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.487961] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.488542] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.489237] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.491758] hda_intel: Disabling MSI
[    7.491770] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    7.593377] usb 4-1: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[    7.607952] xc2028 0-0061: creating new instance
[    7.607956] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[    7.608725] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[    7.608796] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:07:01.2/usb4/4-1/input/input11
[    7.609438] dvb-usb: schedule remote query interval to 100 msecs.
[    7.609577] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected.
[    7.609601] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4' in warm state.
[    7.610117] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.639237] gpio_ich: GPIO from 195 to 255 on gpio_ich
[    7.640862] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4)
[    7.653863] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3
[    7.666506] microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
[    7.688469] cxusb: No IR receiver detected on this device.
[    7.688477] usb 4-2: DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)...
[    7.688617] xc2028 1-0061: creating new instance
[    7.688620] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[    7.688700] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[    7.692793] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 successfully initialized and connected.
[    7.692837] usbcore: registered new interface driver dvb_usb_cxusb
[    7.696187] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[    7.701327] coretemp coretemp.0: Using relative temperature scale!
[    7.701356] coretemp coretemp.0: Using relative temperature scale!
[    7.800160] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[    7.800256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.924426] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[    7.961503] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    7.975619] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    7.986499] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[    7.995089] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    8.093133] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    8.131774] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[    8.236994] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    8.297467] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.302241] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[    8.308146] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    8.308360] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    8.308511] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    8.308657] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    8.396608] init: udev-fallback-graphics main process (995) terminated with status 1
[    9.044891] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.044898] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[    9.044927] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.964606] init: failsafe main process (1020) killed by TERM signal
[   11.019602] type=1400 audit(1404393022.922:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1333 comm="apparmor_parser"
[   11.020227] type=1400 audit(1404393022.926:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1333 comm="apparmor_parser"
[   11.020457] type=1400 audit(1404393022.926:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1333 comm="apparmor_parser"
[   11.024597] type=1400 audit(1404393022.930:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1335 comm="apparmor_parser"
[   11.025150] type=1400 audit(1404393022.930:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1332 comm="apparmor_parser"
[   11.029241] type=1400 audit(1404393022.934:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1336 comm="apparmor_parser"
[   11.177388] imon 10-1:1.0: Looks like you're trying to use an IR protocol this device does not support
[   11.177392] imon 10-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[   11.370636] Bridge firewalling registered
[   11.430063] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.520881] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   11.563754] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   12.227377] Ebtables v2.0 registered
[   12.249522] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.276404] cgroup: libvirtd (1539) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   12.276407] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[   12.276452] cgroup: libvirtd (1539) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   12.276507] cgroup: libvirtd (1539) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   13.844421] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   15.374285] init: plymouth-stop pre-start process (2749) terminated with status 1
[   15.604159] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[   15.631529] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[   15.824328] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   17.535571] xc2028 1-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[   17.562332] xc2028 1-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[  260.268408] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[  261.988655] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
[  262.015032] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index 6acde5ee4324..a22726ccca64 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -44,7 +44,7 @@ 
 #include "atbm8830.h"
 
 /* Max transfer size done by I2C transfer functions */
-#define MAX_XFER_SIZE  64
+#define MAX_XFER_SIZE  80
 
 /* debug */
 static int dvb_usb_cxusb_debug;