@@ -72,7 +72,8 @@ static void rpf_configure(struct vsp1_entity *entity,
}
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
- unsigned int offsets[2];
+ struct vsp1_device *vsp1 = rpf->entity.vsp1;
+ struct vsp1_rwpf_memory mem = rpf->mem;
struct v4l2_rect crop;
/*
@@ -120,22 +121,30 @@ static void rpf_configure(struct vsp1_entity *entity,
(crop.width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
- offsets[0] = crop.top * format->plane_fmt[0].bytesperline
- + crop.left * fmtinfo->bpp[0] / 8;
-
- if (format->num_planes > 1)
- offsets[1] = crop.top * format->plane_fmt[1].bytesperline
- + crop.left / fmtinfo->hsub
- * fmtinfo->bpp[1] / 8;
- else
- offsets[1] = 0;
-
- vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_Y,
- rpf->mem.addr[0] + offsets[0]);
- vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C0,
- rpf->mem.addr[1] + offsets[1]);
- vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C1,
- rpf->mem.addr[2] + offsets[1]);
+ mem.addr[0] += crop.top * format->plane_fmt[0].bytesperline
+ + crop.left * fmtinfo->bpp[0] / 8;
+
+ if (format->num_planes > 1) {
+ unsigned int offset;
+
+ offset = crop.top * format->plane_fmt[1].bytesperline
+ + crop.left / fmtinfo->hsub
+ * fmtinfo->bpp[1] / 8;
+ mem.addr[1] += offset;
+ mem.addr[2] += offset;
+ }
+
+ /*
+ * On Gen3 hardware the SPUVS bit has no effect on 3-planar
+ * formats. Swap the U and V planes manually in that case.
+ */
+ if (vsp1->info->gen == 3 && format->num_planes == 3 &&
+ fmtinfo->swap_uv)
+ swap(mem.addr[1], mem.addr[2]);
+
+ vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
+ vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
+ vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
return;
}
@@ -216,6 +216,7 @@ static void wpf_configure(struct vsp1_entity *entity,
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
+ const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
struct vsp1_rwpf_memory mem = wpf->mem;
unsigned int flip = wpf->flip.active;
unsigned int width = source_format->width;
@@ -281,6 +282,14 @@ static void wpf_configure(struct vsp1_entity *entity,
}
}
+ /*
+ * On Gen3 hardware the SPUVS bit has no effect on 3-planar
+ * formats. Swap the U and V planes manually in that case.
+ */
+ if (vsp1->info->gen == 3 && format->num_planes == 3 &&
+ fmtinfo->swap_uv)
+ swap(mem.addr[1], mem.addr[2]);
+
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]);
The RPF and WPF U/V order bits have no effect for 3-planar formats on Gen3 hardware. Swap the U and V planes addresses manually instead in that case. Fixes: b915bd24a034 ("[media] v4l: vsp1: Add tri-planar memory formats support") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_rpf.c | 43 ++++++++++++++++++++-------------- drivers/media/platform/vsp1/vsp1_wpf.c | 9 +++++++ 2 files changed, 35 insertions(+), 17 deletions(-) Changes since v1: - Fix the U/V order issue on RPF in addition to WPF