@@ -251,7 +251,8 @@ static int bru_set_selection(struct v4l2_subdev *subdev,
sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
- /* Scaling isn't supported, the compose rectangle size must be identical
+ /*
+ * Scaling isn't supported, the compose rectangle size must be identical
* to the sink format size.
*/
format = vsp1_entity_get_pad_format(&bru->entity, config, sel->pad);
@@ -300,13 +301,15 @@ static void bru_configure(struct vsp1_entity *entity,
format = vsp1_entity_get_pad_format(&bru->entity, bru->entity.config,
bru->entity.source_pad);
- /* The hardware is extremely flexible but we have no userspace API to
+ /*
+ * The hardware is extremely flexible but we have no userspace API to
* expose all the parameters, nor is it clear whether we would have use
* cases for all the supported modes. Let's just harcode the parameters
* to sane default values for now.
*/
- /* Disable dithering and enable color data normalization unless the
+ /*
+ * Disable dithering and enable color data normalization unless the
* format at the pipeline output is premultiplied.
*/
flags = pipe->output ? pipe->output->format.flags : 0;
@@ -314,7 +317,8 @@ static void bru_configure(struct vsp1_entity *entity,
flags & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA ?
0 : VI6_BRU_INCTRL_NRM);
- /* Set the background position to cover the whole output image and
+ /*
+ * Set the background position to cover the whole output image and
* configure its color.
*/
vsp1_bru_write(bru, dl, VI6_BRU_VIRRPF_SIZE,
@@ -325,7 +329,8 @@ static void bru_configure(struct vsp1_entity *entity,
vsp1_bru_write(bru, dl, VI6_BRU_VIRRPF_COL, bru->bgcolor |
(0xff << VI6_BRU_VIRRPF_COL_A_SHIFT));
- /* Route BRU input 1 as SRC input to the ROP unit and configure the ROP
+ /*
+ * Route BRU input 1 as SRC input to the ROP unit and configure the ROP
* unit with a NOP operation to make BRU input 1 available as the
* Blend/ROP unit B SRC input.
*/
@@ -337,7 +342,8 @@ static void bru_configure(struct vsp1_entity *entity,
bool premultiplied = false;
u32 ctrl = 0;
- /* Configure all Blend/ROP units corresponding to an enabled BRU
+ /*
+ * Configure all Blend/ROP units corresponding to an enabled BRU
* input for alpha blending. Blend/ROP units corresponding to
* disabled BRU inputs are used in ROP NOP mode to ignore the
* SRC input.
@@ -352,13 +358,15 @@ static void bru_configure(struct vsp1_entity *entity,
| VI6_BRU_CTRL_AROP(VI6_ROP_NOP);
}
- /* Select the virtual RPF as the Blend/ROP unit A DST input to
+ /*
+ * Select the virtual RPF as the Blend/ROP unit A DST input to
* serve as a background color.
*/
if (i == 0)
ctrl |= VI6_BRU_CTRL_DSTSEL_VRPF;
- /* Route BRU inputs 0 to 3 as SRC inputs to Blend/ROP units A to
+ /*
+ * Route BRU inputs 0 to 3 as SRC inputs to Blend/ROP units A to
* D in that order. The Blend/ROP unit B SRC is hardwired to the
* ROP unit output, the corresponding register bits must be set
* to 0.
@@ -368,7 +376,8 @@ static void bru_configure(struct vsp1_entity *entity,
vsp1_bru_write(bru, dl, VI6_BRU_CTRL(i), ctrl);
- /* Harcode the blending formula to
+ /*
+ * Harcode the blending formula to
*
* DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
* DSTa = DSTa * (1 - SRCa) + SRCa
@@ -240,7 +240,8 @@ static struct vsp1_dl_list *vsp1_dl_list_alloc(struct vsp1_dl_manager *dlm)
INIT_LIST_HEAD(&dl->fragments);
dl->dlm = dlm;
- /* Initialize the display list body and allocate DMA memory for the body
+ /*
+ * Initialize the display list body and allocate DMA memory for the body
* and the optional header. Both are allocated together to avoid memory
* fragmentation, with the header located right after the body in
* memory.
@@ -511,7 +512,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl)
goto done;
}
- /* Once the UPD bit has been set the hardware can start processing the
+ /*
+ * Once the UPD bit has been set the hardware can start processing the
* display list at any time and we can't touch the address and size
* registers. In that case mark the update as pending, it will be
* queued up to the hardware by the frame end interrupt handler.
@@ -523,7 +525,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl)
goto done;
}
- /* Program the hardware with the display list body address and size.
+ /*
+ * Program the hardware with the display list body address and size.
* The UPD bit will be cleared by the device when the display list is
* processed.
*/
@@ -547,7 +550,8 @@ void vsp1_dlm_irq_display_start(struct vsp1_dl_manager *dlm)
{
spin_lock(&dlm->lock);
- /* The display start interrupt signals the end of the display list
+ /*
+ * The display start interrupt signals the end of the display list
* processing by the device. The active display list, if any, won't be
* accessed anymore and can be reused.
*/
@@ -566,14 +570,16 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
__vsp1_dl_list_put(dlm->active);
dlm->active = NULL;
- /* Header mode is used for mem-to-mem pipelines only. We don't need to
+ /*
+ * Header mode is used for mem-to-mem pipelines only. We don't need to
* perform any operation as there can't be any new display list queued
* in that case.
*/
if (dlm->mode == VSP1_DL_MODE_HEADER)
goto done;
- /* The UPD bit set indicates that the commit operation raced with the
+ /*
+ * The UPD bit set indicates that the commit operation raced with the
* interrupt and occurred after the frame end event and UPD clear but
* before interrupt processing. The hardware hasn't taken the update
* into account yet, we'll thus skip one frame and retry.
@@ -581,7 +587,8 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
if (vsp1_read(vsp1, VI6_DL_BODY_SIZE) & VI6_DL_BODY_SIZE_UPD)
goto done;
- /* The device starts processing the queued display list right after the
+ /*
+ * The device starts processing the queued display list right after the
* frame end interrupt. The display list thus becomes active.
*/
if (dlm->queued) {
@@ -589,7 +596,8 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
dlm->queued = NULL;
}
- /* Now that the UPD bit has been cleared we can queue the next display
+ /*
+ * Now that the UPD bit has been cleared we can queue the next display
* list to the hardware if one has been prepared.
*/
if (dlm->pending) {
@@ -615,7 +623,8 @@ void vsp1_dlm_setup(struct vsp1_device *vsp1)
| VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0
| VI6_DL_CTRL_DLE;
- /* The DRM pipeline operates with display lists in Continuous Frame
+ /*
+ * The DRM pipeline operates with display lists in Continuous Frame
* Mode, all other pipelines use manual start.
*/
if (vsp1->drm)
@@ -83,7 +83,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
__func__, width, height);
if (width == 0 || height == 0) {
- /* Zero width or height means the CRTC is being disabled, stop
+ /*
+ * Zero width or height means the CRTC is being disabled, stop
* the pipeline and turn the light off.
*/
ret = vsp1_pipeline_stop(pipe);
@@ -108,7 +109,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
return 0;
}
- /* Configure the format at the BRU sinks and propagate it through the
+ /*
+ * Configure the format at the BRU sinks and propagate it through the
* pipeline.
*/
memset(&format, 0, sizeof(format));
@@ -177,7 +179,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
__func__, format.format.width, format.format.height,
format.format.code);
- /* Verify that the format at the output of the pipeline matches the
+ /*
+ * Verify that the format at the output of the pipeline matches the
* requested frame size and media bus code.
*/
if (format.format.width != width || format.format.height != height ||
@@ -186,7 +189,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
return -EPIPE;
}
- /* Mark the pipeline as streaming and enable the VSP1. This will store
+ /*
+ * Mark the pipeline as streaming and enable the VSP1. This will store
* the pipeline pointer in all entities, which the s_stream handlers
* will need. We don't start the entities themselves right at this point
* as there's no plane configured yet, so we can't start processing
@@ -318,7 +322,8 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
const struct v4l2_rect *crop;
int ret;
- /* Configure the format on the RPF sink pad and propagate it up to the
+ /*
+ * Configure the format on the RPF sink pad and propagate it up to the
* BRU sink pad.
*/
crop = &vsp1->drm->inputs[rpf->entity.index].crop;
@@ -357,7 +362,8 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
__func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
rpf->entity.index);
- /* RPF source, hardcode the format to ARGB8888 to turn on format
+ /*
+ * RPF source, hardcode the format to ARGB8888 to turn on format
* conversion if needed.
*/
format.pad = RWPF_PAD_SOURCE;
@@ -529,7 +535,8 @@ int vsp1_drm_create_links(struct vsp1_device *vsp1)
unsigned int i;
int ret;
- /* VSPD instances require a BRU to perform composition and a LIF to
+ /*
+ * VSPD instances require a BRU to perform composition and a LIF to
* output to the DU.
*/
if (!vsp1->bru || !vsp1->lif)
@@ -170,7 +170,8 @@ static int vsp1_uapi_create_links(struct vsp1_device *vsp1)
}
for (i = 0; i < vsp1->info->wpf_count; ++i) {
- /* Connect the video device to the WPF. All connections are
+ /*
+ * Connect the video device to the WPF. All connections are
* immutable.
*/
struct vsp1_rwpf *wpf = vsp1->wpf[i];
@@ -227,7 +228,8 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
media_device_init(mdev);
vsp1->media_ops.link_setup = vsp1_entity_link_setup;
- /* Don't perform link validation when the userspace API is disabled as
+ /*
+ * Don't perform link validation when the userspace API is disabled as
* the pipeline is configured internally by the driver in that case, and
* its configuration can thus be trusted.
*/
@@ -279,7 +281,8 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
list_add_tail(&vsp1->hst->entity.list_dev, &vsp1->entities);
- /* The LIF is only supported when used in conjunction with the DU, in
+ /*
+ * The LIF is only supported when used in conjunction with the DU, in
* which case the userspace API is disabled. If the userspace API is
* enabled skip the LIF, even when present.
*/
@@ -391,7 +394,8 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
if (ret < 0)
goto done;
- /* Register subdev nodes if the userspace API is enabled or initialize
+ /*
+ * Register subdev nodes if the userspace API is enabled or initialize
* the DRM pipeline otherwise.
*/
if (vsp1->info->uapi) {
@@ -199,7 +199,8 @@ int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
- /* The entity can't perform format conversion, the sink format
+ /*
+ * The entity can't perform format conversion, the sink format
* is always identical to the source format.
*/
if (code->index)
@@ -263,7 +264,8 @@ int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev,
fse->min_height = min_height;
fse->max_height = max_height;
} else {
- /* The size on the source pad are fixed and always identical to
+ /*
+ * The size on the source pad are fixed and always identical to
* the size on the sink pad.
*/
fse->min_width = format->width;
@@ -407,7 +409,8 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
vsp1_entity_init_cfg(subdev, NULL);
- /* Allocate the pad configuration to store formats and selection
+ /*
+ * Allocate the pad configuration to store formats and selection
* rectangles.
*/
entity->config = v4l2_subdev_alloc_pad_config(&entity->subdev);
@@ -84,7 +84,8 @@ static int hsit_set_format(struct v4l2_subdev *subdev,
format = vsp1_entity_get_pad_format(&hsit->entity, config, fmt->pad);
if (fmt->pad == HSIT_PAD_SOURCE) {
- /* The HST and HSI output format code and resolution can't be
+ /*
+ * The HST and HSI output format code and resolution can't be
* modified.
*/
fmt->format = *format;
@@ -84,7 +84,8 @@ static int lif_set_format(struct v4l2_subdev *subdev,
format = vsp1_entity_get_pad_format(&lif->entity, config, fmt->pad);
if (fmt->pad == LIF_PAD_SOURCE) {
- /* The LIF source format is always identical to its sink
+ /*
+ * The LIF source format is always identical to its sink
* format.
*/
fmt->format = *format;
@@ -176,7 +177,8 @@ struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1)
lif->entity.ops = &lif_entity_ops;
lif->entity.type = VSP1_ENTITY_LIF;
- /* The LIF is never exposed to userspace, but media entity registration
+ /*
+ * The LIF is never exposed to userspace, but media entity registration
* requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to
* avoid triggering a WARN_ON(), the value won't be seen anywhere.
*/
@@ -251,7 +251,8 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe)
int ret;
if (pipe->lif) {
- /* When using display lists in continuous frame mode the only
+ /*
+ * When using display lists in continuous frame mode the only
* way to stop the pipeline is to reset the hardware.
*/
ret = vsp1_reset_wpf(pipe->output->entity.vsp1,
@@ -322,7 +323,8 @@ void vsp1_pipeline_propagate_alpha(struct vsp1_pipeline *pipe,
if (!pipe->uds)
return;
- /* The BRU background color has a fixed alpha value set to 255, the
+ /*
+ * The BRU background color has a fixed alpha value set to 255, the
* output alpha value is thus always equal to 255.
*/
if (pipe->uds_input->type == VSP1_ENTITY_BRU)
@@ -337,7 +339,8 @@ void vsp1_pipelines_suspend(struct vsp1_device *vsp1)
unsigned int i;
int ret;
- /* To avoid increasing the system suspend time needlessly, loop over the
+ /*
+ * To avoid increasing the system suspend time needlessly, loop over the
* pipelines twice, first to set them all to the stopping state, and
* then to wait for the stop to complete.
*/
@@ -195,7 +195,8 @@ static void rpf_configure(struct vsp1_entity *entity,
(left << VI6_RPF_LOC_HCOORD_SHIFT) |
(top << VI6_RPF_LOC_VCOORD_SHIFT));
- /* On Gen2 use the alpha channel (extended to 8 bits) when available or
+ /*
+ * On Gen2 use the alpha channel (extended to 8 bits) when available or
* a fixed alpha value set through the V4L2_CID_ALPHA_COMPONENT control
* otherwise.
*
@@ -225,7 +226,8 @@ static void rpf_configure(struct vsp1_entity *entity,
u32 mult;
if (fmtinfo->alpha) {
- /* When the input contains an alpha channel enable the
+ /*
+ * When the input contains an alpha channel enable the
* alpha multiplier. If the input is premultiplied we
* need to multiply both the alpha channel and the pixel
* components by the global alpha value to keep them
@@ -240,7 +242,8 @@ static void rpf_configure(struct vsp1_entity *entity,
VI6_RPF_MULT_ALPHA_P_MMD_RATIO :
VI6_RPF_MULT_ALPHA_P_MMD_NONE);
} else {
- /* When the input doesn't contain an alpha channel the
+ /*
+ * When the input doesn't contain an alpha channel the
* global alpha value is applied in the unpacking unit,
* the alpha multiplier isn't needed and must be
* disabled.
@@ -86,7 +86,8 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
format = vsp1_entity_get_pad_format(&rwpf->entity, config, fmt->pad);
if (fmt->pad == RWPF_PAD_SOURCE) {
- /* The RWPF performs format conversion but can't scale, only the
+ /*
+ * The RWPF performs format conversion but can't scale, only the
* format code can be changed on the source pad.
*/
format->code = fmt->format.code;
@@ -205,7 +206,8 @@ static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev,
format = vsp1_entity_get_pad_format(&rwpf->entity, config,
RWPF_PAD_SINK);
- /* Restrict the crop rectangle coordinates to multiples of 2 to avoid
+ /*
+ * Restrict the crop rectangle coordinates to multiples of 2 to avoid
* shifting the color plane.
*/
if (format->code == MEDIA_BUS_FMT_AYUV8_1X32) {
@@ -191,7 +191,8 @@ static void sru_try_format(struct vsp1_sru *sru,
SRU_PAD_SINK);
fmt->code = format->code;
- /* We can upscale by 2 in both direction, but not independently.
+ /*
+ * We can upscale by 2 in both direction, but not independently.
* Compare the input and output rectangles areas (avoiding
* integer overflows on the output): if the requested output
* area is larger than 1.5^2 the input area upscale by two,
@@ -293,7 +293,8 @@ static void uds_configure(struct vsp1_entity *entity,
dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale);
- /* Multi-tap scaling can't be enabled along with alpha scaling when
+ /*
+ * Multi-tap scaling can't be enabled along with alpha scaling when
* scaling down with a factor lower than or equal to 1/2 in either
* direction.
*/
@@ -103,7 +103,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video,
unsigned int height = pix->height;
unsigned int i;
- /* Backward compatibility: replace deprecated RGB formats by their XRGB
+ /*
+ * Backward compatibility: replace deprecated RGB formats by their XRGB
* equivalent. This selects the format older userspace applications want
* while still exposing the new format.
*/
@@ -114,7 +115,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video,
}
}
- /* Retrieve format information and select the default format if the
+ /*
+ * Retrieve format information and select the default format if the
* requested format isn't supported.
*/
info = vsp1_get_format_info(video->vsp1, pix->pixelformat);
@@ -140,7 +142,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video,
pix->height = clamp(height, VSP1_VIDEO_MIN_HEIGHT,
VSP1_VIDEO_MAX_HEIGHT);
- /* Compute and clamp the stride and image size. While not documented in
+ /*
+ * Compute and clamp the stride and image size. While not documented in
* the datasheet, strides not aligned to a multiple of 128 bytes result
* in image corruption.
*/
@@ -449,7 +452,8 @@ static void vsp1_video_pipeline_frame_end(struct vsp1_pipeline *pipe)
state = pipe->state;
pipe->state = VSP1_PIPELINE_STOPPED;
- /* If a stop has been requested, mark the pipeline as stopped and
+ /*
+ * If a stop has been requested, mark the pipeline as stopped and
* return. Otherwise restart the pipeline if ready.
*/
if (state == VSP1_PIPELINE_STOPPING)
@@ -491,7 +495,8 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe,
entity = to_vsp1_entity(
media_entity_to_v4l2_subdev(pad->entity));
- /* A BRU is present in the pipeline, store the BRU input pad
+ /*
+ * A BRU is present in the pipeline, store the BRU input pad
* number in the input RPF for use when configuring the RPF.
*/
if (entity->type == VSP1_ENTITY_BRU) {
@@ -526,7 +531,8 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe,
: &input->entity;
}
- /* Follow the source link. The link setup operations ensure
+ /*
+ * Follow the source link. The link setup operations ensure
* that the output fan-out can't be more than one, there is thus
* no need to verify here that only a single source link is
* activated.
@@ -596,7 +602,8 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
if (pipe->num_inputs == 0 || !pipe->output)
return -EPIPE;
- /* Follow links downstream for each input and make sure the graph
+ /*
+ * Follow links downstream for each input and make sure the graph
* contains no loop and that all branches end at the output WPF.
*/
for (i = 0; i < video->vsp1->info->rpf_count; ++i) {
@@ -627,7 +634,8 @@ static struct vsp1_pipeline *vsp1_video_pipeline_get(struct vsp1_video *video)
struct vsp1_pipeline *pipe;
int ret;
- /* Get a pipeline object for the video node. If a pipeline has already
+ /*
+ * Get a pipeline object for the video node. If a pipeline has already
* been allocated just increment its reference count and return it.
* Otherwise allocate a new pipeline and initialize it, it will be freed
* when the last reference is released.
@@ -767,7 +775,8 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe)
if (pipe->uds) {
struct vsp1_uds *uds = to_uds(&pipe->uds->subdev);
- /* If a BRU is present in the pipeline before the UDS, the alpha
+ /*
+ * If a BRU is present in the pipeline before the UDS, the alpha
* component doesn't need to be scaled as the BRU output alpha
* value is fixed to 255. Otherwise we need to scale the alpha
* component only when available at the input RPF.
@@ -981,7 +990,8 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
if (video->queue.owner && video->queue.owner != file->private_data)
return -EBUSY;
- /* Get a pipeline for the video node and start streaming on it. No link
+ /*
+ * Get a pipeline for the video node and start streaming on it. No link
* touching an entity in the pipeline can be activated or deactivated
* once streaming is started.
*/
@@ -1001,7 +1011,8 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
mutex_unlock(&mdev->graph_mutex);
- /* Verify that the configured format matches the output of the connected
+ /*
+ * Verify that the configured format matches the output of the connected
* subdev.
*/
ret = vsp1_video_verify_format(video);
@@ -88,12 +88,14 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf)
/* Only WPF0 supports flipping. */
num_flip_ctrls = 0;
} else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) {
- /* When horizontal flip is supported the WPF implements two
+ /*
+ * When horizontal flip is supported the WPF implements two
* controls (horizontal flip and vertical flip).
*/
num_flip_ctrls = 2;
} else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) {
- /* When only vertical flip is supported the WPF implements a
+ /*
+ * When only vertical flip is supported the WPF implements a
* single control (vertical flip).
*/
num_flip_ctrls = 1;
@@ -139,7 +141,8 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable)
if (enable)
return 0;
- /* Write to registers directly when stopping the stream as there will be
+ /*
+ * Write to registers directly when stopping the stream as there will be
* no pipeline run to apply the display list.
*/
vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0);
@@ -336,7 +339,8 @@ static void wpf_configure(struct vsp1_entity *entity,
vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0);
- /* Sources. If the pipeline has a single input and BRU is not used,
+ /*
+ * Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
Fix all multi-line comments to comply with the kernel coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_bru.c | 27 ++++++++++++++++--------- drivers/media/platform/vsp1/vsp1_dl.c | 27 ++++++++++++++++--------- drivers/media/platform/vsp1/vsp1_drm.c | 21 +++++++++++++------- drivers/media/platform/vsp1/vsp1_drv.c | 12 +++++++---- drivers/media/platform/vsp1/vsp1_entity.c | 9 ++++++--- drivers/media/platform/vsp1/vsp1_hsit.c | 3 ++- drivers/media/platform/vsp1/vsp1_lif.c | 6 ++++-- drivers/media/platform/vsp1/vsp1_pipe.c | 9 ++++++--- drivers/media/platform/vsp1/vsp1_rpf.c | 9 ++++++--- drivers/media/platform/vsp1/vsp1_rwpf.c | 6 ++++-- drivers/media/platform/vsp1/vsp1_sru.c | 3 ++- drivers/media/platform/vsp1/vsp1_uds.c | 3 ++- drivers/media/platform/vsp1/vsp1_video.c | 33 ++++++++++++++++++++----------- drivers/media/platform/vsp1/vsp1_wpf.c | 12 +++++++---- 14 files changed, 120 insertions(+), 60 deletions(-)