diff mbox

v4l: vsp1: adapt vsp1_du_setup_lif() interface to use a structure

Message ID 20170303173054.13397-1-laurent.pinchart+renesas@ideasonboard.com (mailing list archive)
State New, archived
Headers show

Commit Message

Laurent Pinchart March 3, 2017, 5:30 p.m. UTC 
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

The interface to configure the LIF in the VSP1 requires adapting the
function prototype for any changes. This makes extending the interface
difficult.

Change the function prototype to pass a structure which can be easily
extended.

This changes the means of disabling the pipeline, by now passing a NULL
configuration rather than passing either a 0 width or height.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c  |  8 ++++++--
 drivers/media/platform/vsp1/vsp1_drm.c | 34 +++++++++++++++++-----------------
 include/media/vsp1.h                   |  8 ++++++--
 3 files changed, 29 insertions(+), 21 deletions(-)

This patch unfortunately has to span two subsystems, and could thus be painful
to get merged, requiring a stable branch on one side that can be pulled on the
other side. An alternative would be to get it merged through the linux-media
tree in the current -rc cycle, as there would thus be no risk of conflict.
I'll defer to the respective maintainers to decide on what the best strategy
is.
diff mbox

Patch

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index b5bfbe50bd87..b0ff304ce3dc 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -32,6 +32,10 @@  void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 {
 	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
 	struct rcar_du_device *rcdu = crtc->group->dev;
+	struct vsp1_du_lif_config cfg = {
+		.width = mode->hdisplay,
+		.height = mode->vdisplay,
+	};
 	struct rcar_du_plane_state state = {
 		.state = {
 			.crtc = &crtc->crtc,
@@ -66,12 +70,12 @@  void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 	 */
 	crtc->group->need_restart = true;
 
-	vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay);
+	vsp1_du_setup_lif(crtc->vsp->vsp, &cfg);
 }
 
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
 {
-	vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0);
+	vsp1_du_setup_lif(crtc->vsp->vsp, NULL);
 }
 
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index 3a2d801f2505..7dce55043379 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -54,12 +54,11 @@  EXPORT_SYMBOL_GPL(vsp1_du_init);
 /**
  * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
  * @dev: the VSP device
- * @width: output frame width in pixels
- * @height: output frame height in pixels
+ * @cfg: the LIF configuration
  *
- * Configure the output part of VSP DRM pipeline for the given frame @width and
- * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
- * pads, and the LIF sink pad.
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
+ * and source pads, and the LIF sink pad.
  *
  * As the media bus code on the BRU source pad is conditioned by the
  * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
@@ -69,8 +68,7 @@  EXPORT_SYMBOL_GPL(vsp1_du_init);
  *
  * Return 0 on success or a negative error code on failure.
  */
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-		      unsigned int height)
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
 {
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 	struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
@@ -79,11 +77,9 @@  int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	unsigned int i;
 	int ret;
 
-	dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
-		__func__, width, height);
-
-	if (width == 0 || height == 0) {
-		/* Zero width or height means the CRTC is being disabled, stop
+	if (!cfg) {
+		/*
+		 * NULL configuration means the CRTC is being disabled, stop
 		 * the pipeline and turn the light off.
 		 */
 		ret = vsp1_pipeline_stop(pipe);
@@ -108,6 +104,9 @@  int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 		return 0;
 	}
 
+	dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+		__func__, cfg->width, cfg->height);
+
 	/* Configure the format at the BRU sinks and propagate it through the
 	 * pipeline.
 	 */
@@ -117,8 +116,8 @@  int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	for (i = 0; i < bru->entity.source_pad; ++i) {
 		format.pad = i;
 
-		format.format.width = width;
-		format.format.height = height;
+		format.format.width = cfg->width;
+		format.format.height = cfg->height;
 		format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 		format.format.field = V4L2_FIELD_NONE;
 
@@ -133,8 +132,8 @@  int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	}
 
 	format.pad = bru->entity.source_pad;
-	format.format.width = width;
-	format.format.height = height;
+	format.format.width = cfg->width;
+	format.format.height = cfg->height;
 	format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
 	format.format.field = V4L2_FIELD_NONE;
 
@@ -180,7 +179,8 @@  int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 	/* Verify that the format at the output of the pipeline matches the
 	 * requested frame size and media bus code.
 	 */
-	if (format.format.width != width || format.format.height != height ||
+	if (format.format.width != cfg->width ||
+	    format.format.height != cfg->height ||
 	    format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
 		dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
 		return -EPIPE;
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 458b400373d4..bfc701f04f3f 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -20,8 +20,12 @@  struct device;
 
 int vsp1_du_init(struct device *dev);
 
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
-		      unsigned int height);
+struct vsp1_du_lif_config {
+	unsigned int width;
+	unsigned int height;
+};
+
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg);
 
 struct vsp1_du_atomic_config {
 	u32 pixelformat;