@@ -32,6 +32,10 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
{
const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
struct rcar_du_device *rcdu = crtc->group->dev;
+ struct vsp1_du_lif_config cfg = {
+ .width = mode->hdisplay,
+ .height = mode->vdisplay,
+ };
struct rcar_du_plane_state state = {
.state = {
.crtc = &crtc->crtc,
@@ -66,12 +70,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
*/
crtc->group->need_restart = true;
- vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay);
+ vsp1_du_setup_lif(crtc->vsp->vsp, &cfg);
}
void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
{
- vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0);
+ vsp1_du_setup_lif(crtc->vsp->vsp, NULL);
}
void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
@@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
/**
* vsp1_du_setup_lif - Setup the output part of the VSP pipeline
* @dev: the VSP device
- * @width: output frame width in pixels
- * @height: output frame height in pixels
+ * @cfg: the LIF configuration
*
- * Configure the output part of VSP DRM pipeline for the given frame @width and
- * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
- * pads, and the LIF sink pad.
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
+ * and source pads, and the LIF sink pad.
*
* As the media bus code on the BRU source pad is conditioned by the
* configuration of the BRU sink 0 pad, we also set up the formats on all BRU
@@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
*
* Return 0 on success or a negative error code on failure.
*/
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
- unsigned int height)
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
{
struct vsp1_device *vsp1 = dev_get_drvdata(dev);
struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
@@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
unsigned int i;
int ret;
- dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
- __func__, width, height);
-
- if (width == 0 || height == 0) {
- /* Zero width or height means the CRTC is being disabled, stop
+ if (!cfg) {
+ /* NULL configuration means the CRTC is being disabled, stop
* the pipeline and turn the light off.
*/
ret = vsp1_pipeline_stop(pipe);
@@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
return 0;
}
+ dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+ __func__, cfg->width, cfg->height);
+
/* Configure the format at the BRU sinks and propagate it through the
* pipeline.
*/
@@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
for (i = 0; i < bru->entity.source_pad; ++i) {
format.pad = i;
- format.format.width = width;
- format.format.height = height;
+ format.format.width = cfg->width;
+ format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
@@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
}
format.pad = bru->entity.source_pad;
- format.format.width = width;
- format.format.height = height;
+ format.format.width = cfg->width;
+ format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
@@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
/* Verify that the format at the output of the pipeline matches the
* requested frame size and media bus code.
*/
- if (format.format.width != width || format.format.height != height ||
+ if (format.format.width != cfg->width ||
+ format.format.height != cfg->height ||
format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
return -EPIPE;
@@ -20,8 +20,17 @@ struct device;
int vsp1_du_init(struct device *dev);
-int vsp1_du_setup_lif(struct device *dev, unsigned int width,
- unsigned int height);
+/**
+ * struct vsp1_du_lif_config - VSP LIF configuration
+ * @width: output frame width
+ * @height: output frame height
+ */
+struct vsp1_du_lif_config {
+ unsigned int width;
+ unsigned int height;
+};
+
+int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg);
struct vsp1_du_atomic_config {
u32 pixelformat;