@@ -28,6 +28,7 @@ struct af9013_state {
u8 tuner;
u32 if_frequency;
u8 ts_mode;
+ u8 ts_output_pin;
bool spec_inv;
u8 api_version[4];
u8 gpio[4];
@@ -955,17 +956,12 @@ static int af9013_init(struct dvb_frontend *fe)
goto err;
/* settings for mp2if */
- if (state->ts_mode == AF9013_TS_USB) {
+ if (state->ts_mode == AF9013_TS_MODE_USB) {
/* AF9015 split PSB to 1.5k + 0.5k */
ret = regmap_update_bits(state->regmap, 0xd50b, 0x04, 0x04);
if (ret)
goto err;
} else {
- /* AF9013 change the output bit to data7 */
- ret = regmap_update_bits(state->regmap, 0xd500, 0x08, 0x08);
- if (ret)
- goto err;
-
/* AF9013 set mpeg to full speed */
ret = regmap_update_bits(state->regmap, 0xd502, 0x10, 0x10);
if (ret)
@@ -1046,9 +1042,12 @@ static int af9013_init(struct dvb_frontend *fe)
goto err;
}
- /* TS mode */
- ret = regmap_update_bits(state->regmap, 0xd500, 0x06,
- state->ts_mode << 1);
+ /* TS interface */
+ if (state->ts_output_pin == 7)
+ utmp = 1 << 3 | state->ts_mode << 1;
+ else
+ utmp = 0 << 3 | state->ts_mode << 1;
+ ret = regmap_update_bits(state->regmap, 0xd500, 0x0e, utmp);
if (ret)
goto err;
@@ -1147,7 +1146,7 @@ static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
if (state->i2c_gate_state == enable)
return 0;
- if (state->ts_mode == AF9013_TS_USB)
+ if (state->ts_mode == AF9013_TS_MODE_USB)
ret = regmap_update_bits(state->regmap, 0xd417, 0x08,
enable << 3);
else
@@ -1297,6 +1296,7 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config,
pdata.tuner = config->tuner;
pdata.if_frequency = config->if_frequency;
pdata.ts_mode = config->ts_mode;
+ pdata.ts_output_pin = 7;
pdata.spec_inv = config->spec_inv;
memcpy(&pdata.api_version, config->api_version, sizeof(pdata.api_version));
memcpy(&pdata.gpio, config->gpio, sizeof(pdata.gpio));
@@ -1450,7 +1450,7 @@ static int af9013_regmap_write(void *context, const void *data, size_t count)
u8 *val = &((u8 *)data)[2];
const unsigned int len = count - 2;
- if (state->ts_mode == AF9013_TS_USB && (reg & 0xff00) != 0xae00) {
+ if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|1 << 0;
ret = af9013_wregs(client, cmd, reg, val, len);
if (ret)
@@ -1487,7 +1487,7 @@ static int af9013_regmap_read(void *context, const void *reg_buf,
u8 *val = &((u8 *)val_buf)[0];
const unsigned int len = val_size;
- if (state->ts_mode == AF9013_TS_USB && (reg & 0xff00) != 0xae00) {
+ if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|0 << 0;
ret = af9013_rregs(client, cmd, reg, val_buf, len);
if (ret)
@@ -1537,6 +1537,7 @@ static int af9013_probe(struct i2c_client *client,
state->tuner = pdata->tuner;
state->if_frequency = pdata->if_frequency;
state->ts_mode = pdata->ts_mode;
+ state->ts_output_pin = pdata->ts_output_pin;
state->spec_inv = pdata->spec_inv;
memcpy(&state->api_version, pdata->api_version, sizeof(state->api_version));
memcpy(&state->gpio, pdata->gpio, sizeof(state->gpio));
@@ -1549,7 +1550,7 @@ static int af9013_probe(struct i2c_client *client,
}
/* Download firmware */
- if (state->ts_mode != AF9013_TS_USB) {
+ if (state->ts_mode != AF9013_TS_MODE_USB) {
ret = af9013_download_firmware(state);
if (ret)
goto err_regmap_exit;
@@ -33,6 +33,7 @@
* @tuner: Used tuner model.
* @if_frequency: IF frequency.
* @ts_mode: TS mode.
+ * @ts_output_pin: TS output pin.
* @spec_inv: Input spectrum inverted.
* @api_version: Firmware API version.
* @gpio: GPIOs.
@@ -62,6 +63,7 @@ struct af9013_platform_data {
#define AF9013_TS_MODE_PARALLEL 1
#define AF9013_TS_MODE_SERIAL 2
u8 ts_mode;
+ u8 ts_output_pin;
bool spec_inv;
u8 api_version[4];
#define AF9013_GPIO_ON (1 << 0)
On serial TS mode output pin could be selected from D0 or D7. Add configuration option to for it. Rename TS mode config option prefix from AF9013_TS_ to AF9013_TS_MODE_. Signed-off-by: Antti Palosaari <crope@iki.fi> --- drivers/media/dvb-frontends/af9013.c | 27 ++++++++++++++------------- drivers/media/dvb-frontends/af9013.h | 2 ++ 2 files changed, 16 insertions(+), 13 deletions(-)