diff mbox series

[v11,1/3,media] imx214: device tree binding

Message ID 20181005225011.3269-1-ricardo.ribalda@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v11,1/3,media] imx214: device tree binding | expand

Commit Message

Ricardo Ribalda Delgado Oct. 5, 2018, 10:50 p.m. UTC 
Document bindings for imx214 camera sensor

Cc: devicetree@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
Changelog from v10:

Sakari Ailus:
-Re-introduce clock-frequency property

 .../bindings/media/i2c/sony,imx214.txt        | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt

Comments

Rob Herring (Arm) Oct. 11, 2018, 10:10 p.m. UTC | #1 
On Sat,  6 Oct 2018 00:50:11 +0200, Ricardo Ribalda Delgado wrote:
> Document bindings for imx214 camera sensor
> 
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> ---
> Changelog from v10:
> 
> Sakari Ailus:
> -Re-introduce clock-frequency property
> 
>  .../bindings/media/i2c/sony,imx214.txt        | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
new file mode 100644
index 000000000000..f11f28a5fda4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
@@ -0,0 +1,53 @@ 
+* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
+
+The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+an active array size of 4224H x 3200V. It is programmable through an I2C
+interface.
+Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
+throughput of 1.2Gbps/lane.
+
+
+Required Properties:
+- compatible: Shall be "sony,imx214".
+- reg: I2C bus address of the device. Depending on how the sensor is wired,
+       it shall be <0x10> or <0x1a>;
+- enable-gpios: GPIO descriptor for the enable pin.
+- vdddo-supply: Chip digital IO regulator (1.8V).
+- vdda-supply: Chip analog regulator (2.7V).
+- vddd-supply: Chip digital core regulator (1.12V).
+- clocks: Reference to the xclk clock.
+- clock-frequency: Frequency of the xclk clock.
+
+Optional Properties:
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+The imx214 device node shall contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+
+	camera-sensor@1a {
+		compatible = "sony,imx214";
+		reg = <0x1a>;
+		vdddo-supply = <&pm8994_lvs1>;
+		vddd-supply = <&camera_vddd_1v12>;
+		vdda-supply = <&pm8994_l17>;
+		lens-focus = <&ad5820>;
+		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&mmcc CAMSS_MCLK0_CLK>;
+		clock-frequency = <24000000>;
+		port {
+			imx214_ep: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <480000000>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};