Message ID | 20181114145934.26855-2-maxime.ripard@bootlin.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | media: sun6i: Add support for the H3 CSI controller | expand |
On Wed, Nov 14, 2018 at 10:59 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > The H3 has a slightly different CSI controller (no BT656, no CCI) which > looks a lot like the original A31 controller. Add a compatible for the A31, > and more specific compatible the for the H3 to be used in combination for > the A31. > > Reviewed-by: Rob Herring <robh@kernel.org> > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt index 2ff47a9507a6..3f8eb0296382 100644 --- a/Documentation/devicetree/bindings/media/sun6i-csi.txt +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -5,7 +5,10 @@ Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 interface and CSI1 is used for parallel interface. Required properties: - - compatible: value must be "allwinner,sun8i-v3s-csi" + - compatible: value must be one of: + * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-v3s-csi" - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the CSI