| Message ID | 20181205092444.29497-9-paul.kocialkowski@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Cedrus H5 and A64 support with A33 and H3 updates | expand |
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e438e54580e1..a858d91dd4c6 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -120,7 +120,7 @@ }; soc { - system-control@1c00000 { + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; reg = <0x01c00000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 0d9e9eac518c..ed5846982685 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -152,12 +152,6 @@ }; }; - syscon: syscon@1c00000 { - compatible = "allwinner,sun8i-h3-system-controller", - "syscon"; - reg = <0x01c00000 0x1000>; - }; - dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 42bfb560b367..4e9025431e9f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -94,7 +94,7 @@ }; soc { - system-control@1c00000 { + syscon: system-control@1c00000 { compatible = "allwinner,sun50i-h5-system-control"; reg = <0x01c00000 0x1000>; #address-cells = <1>;
The EMAC driver requires a syscon node to access the EMAC clock configuration register (that is part of the system-control register range and controlled). For this purpose, a dummy syscon node was introduced to let the driver access the register freely. Recently, the EMAC driver was tuned to get access to the register when the SRAM driver is registered (as used on the A64). As a result, it is no longer necessary to have a dummy syscon node for that purpose. Now that we have a proper system-control node for both the H3 and H5, we can get rid of that dummy syscon node and have the EMAC driver use the node corresponding to the proper SRAM driver (by switching the syscon label over to each dtsi). This way, we no longer have two separate nodes for the same register space. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 2 +- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ------ arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +- 3 files changed, 2 insertions(+), 8 deletions(-)