@@ -242,6 +242,7 @@ struct ov7670_info {
struct v4l2_mbus_framefmt format;
struct ov7670_format_struct *fmt; /* Current format */
struct clk *clk;
+ int on;
struct gpio_desc *resetb_gpio;
struct gpio_desc *pwdn_gpio;
unsigned int mbus_config; /* Media bus configuration flags */
@@ -1603,19 +1604,54 @@ static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_regis
}
#endif
-static int ov7670_s_power(struct v4l2_subdev *sd, int on)
+static void ov7670_power_on(struct v4l2_subdev *sd)
{
struct ov7670_info *info = to_state(sd);
+ if (info->on)
+ return;
+
if (info->pwdn_gpio)
- gpiod_set_value(info->pwdn_gpio, !on);
- if (on && info->resetb_gpio) {
+ gpiod_set_value(info->pwdn_gpio, 0);
+ if (info->resetb_gpio) {
gpiod_set_value(info->resetb_gpio, 1);
usleep_range(500, 1000);
gpiod_set_value(info->resetb_gpio, 0);
usleep_range(3000, 5000);
}
+ info->on = true;
+}
+
+static void ov7670_power_off(struct v4l2_subdev *sd)
+{
+ struct ov7670_info *info = to_state(sd);
+
+ if (!info->on)
+ return;
+
+ if (info->pwdn_gpio)
+ gpiod_set_value(info->pwdn_gpio, 1);
+
+ info->on = false;
+}
+
+static int ov7670_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct ov7670_info *info = to_state(sd);
+
+ if (info->on == on)
+ return 0;
+
+ if (on) {
+ ov7670_power_on (sd);
+ ov7670_apply_fmt(sd);
+ ov7675_apply_framerate(sd);
+ v4l2_ctrl_handler_setup(&info->hdl);
+ } else {
+ ov7670_power_off (sd);
+ }
+
return 0;
}
@@ -1648,6 +1684,7 @@ static int ov7670_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
static const struct v4l2_subdev_core_ops ov7670_core_ops = {
.reset = ov7670_reset,
.init = ov7670_init,
+ .s_power = ov7670_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -1812,6 +1849,7 @@ static int ov7670_probe(struct i2c_client *client,
else
return ret;
}
+
if (info->clk) {
ret = clk_prepare_enable(info->clk);
if (ret)
@@ -1828,7 +1866,7 @@ static int ov7670_probe(struct i2c_client *client,
if (ret)
goto clk_disable;
- ov7670_s_power(sd, 1);
+ ov7670_power_on(sd);
/* Make sure it's an ov7670 */
ret = ov7670_detect(sd);
@@ -1915,7 +1953,7 @@ static int ov7670_probe(struct i2c_client *client,
hdl_free:
v4l2_ctrl_handler_free(&info->hdl);
power_off:
- ov7670_s_power(sd, 0);
+ ov7670_power_off(sd);
clk_disable:
clk_disable_unprepare(info->clk);
return ret;
@@ -1931,7 +1969,7 @@ static int ov7670_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(&info->hdl);
clk_disable_unprepare(info->clk);
media_entity_cleanup(&info->sd.entity);
- ov7670_s_power(sd, 0);
+ ov7670_power_off(sd);
return 0;
}
The commit 71862f63f351 ("media: ov7670: Add the ov7670_s_power function") added a power control routing. However, it was not good enough to use as a s_power() callback: it merely flipped on the power GPIOs without restoring the register settings. Fix this now and register an actual power callback. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- drivers/media/i2c/ov7670.c | 50 +++++++++++++++++++++++++++++++++----- 1 file changed, 44 insertions(+), 6 deletions(-)