[2/8] soc_mt9t112: remove obsolete sensor driver

Message ID	20190117161802.5740-3-hverkuil-cisco@xs4all.nl (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-media-owner@kernel.org> From: hverkuil-cisco@xs4all.nl To: linux-media@vger.kernel.org Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>, Sakari Ailus <sakari.ailus@linux.intel.com>, Hans Verkuil <hverkuil-cisco@xs4all.nl> Subject: [PATCH 2/8] soc_mt9t112: remove obsolete sensor driver Date: Thu, 17 Jan 2019 17:17:56 +0100 Message-Id: <20190117161802.5740-3-hverkuil-cisco@xs4all.nl> In-Reply-To: <20190117161802.5740-1-hverkuil-cisco@xs4all.nl> References: <20190117161802.5740-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org Precedence: bulk
Series	Remove obsolete soc_camera drivers \| expand [0/8] Remove obsolete soc_camera drivers [1/8] media: tw9910: Unregister subdevice with v4l2-async [2/8] soc_mt9t112: remove obsolete sensor driver [3/8] soc_ov772x: remove obsolete sensor driver [4/8] tw9910.h: remove obsolete soc_camera.h include. [5/8] soc_tw9910: remove obsolete sensor driver [6/8] sh_mobile_ceu_camera: remove obsolete soc_camera driver [7/8] soc_camera/soc_scale_crop: drop this unused code [8/8] soc_camera_platform: remove obsolete soc_camera test driver

diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig index f67499187bda..773d067c44a3 100644 --- a/drivers/media/i2c/soc_camera/Kconfig +++ b/drivers/media/i2c/soc_camera/Kconfig @@ -17,12 +17,6 @@ config SOC_CAMERA_MT9M111 This is the legacy configuration which shouldn't be used anymore, while VIDEO_MT9M111 should be used instead. -config SOC_CAMERA_MT9T112 - tristate "mt9t112 support" - depends on SOC_CAMERA && I2C - help - This driver supports MT9T112 cameras from Aptina. - config SOC_CAMERA_MT9V022 tristate "mt9v022 and mt9v024 support" depends on SOC_CAMERA && I2C diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile index 0d15864cfda8..ea8da4074a01 100644 --- a/drivers/media/i2c/soc_camera/Makefile +++ b/drivers/media/i2c/soc_camera/Makefile @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_SOC_CAMERA_MT9M001) += soc_mt9m001.o -obj-$(CONFIG_SOC_CAMERA_MT9T112) += soc_mt9t112.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += soc_mt9v022.o obj-$(CONFIG_SOC_CAMERA_OV5642) += soc_ov5642.o obj-$(CONFIG_SOC_CAMERA_OV772X) += soc_ov772x.o diff --git a/drivers/media/i2c/soc_camera/soc_mt9t112.c b/drivers/media/i2c/soc_camera/soc_mt9t112.c deleted file mode 100644 index ea1ff270bc2d..000000000000 --- a/drivers/media/i2c/soc_camera/soc_mt9t112.c +++ /dev/null @@ -1,1157 +0,0 @@ -/* - * mt9t112 Camera Driver - * - * Copyright (C) 2009 Renesas Solutions Corp. - * Kuninori Morimoto <morimoto.kuninori@renesas.com> - * - * Based on ov772x driver, mt9m111 driver, - * - * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> - * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr> - * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> - * Copyright (C) 2008 Magnus Damm - * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/v4l2-mediabus.h> -#include <linux/videodev2.h> - -#include <media/i2c/mt9t112.h> -#include <media/soc_camera.h> -#include <media/v4l2-clk.h> -#include <media/v4l2-common.h> -#include <media/v4l2-image-sizes.h> - -/* you can check PLL/clock info */ -/* #define EXT_CLOCK 24000000 */ - -/************************************************************************ - macro -************************************************************************/ -/* - * frame size - */ -#define MAX_WIDTH 2048 -#define MAX_HEIGHT 1536 - -/* - * macro of read/write - */ -#define ECHECKER(ret, x) \ - do { \ - (ret) = (x); \ - if ((ret) < 0) \ - return (ret); \ - } while (0) - -#define mt9t112_reg_write(ret, client, a, b) \ - ECHECKER(ret, __mt9t112_reg_write(client, a, b)) -#define mt9t112_mcu_write(ret, client, a, b) \ - ECHECKER(ret, __mt9t112_mcu_write(client, a, b)) - -#define mt9t112_reg_mask_set(ret, client, a, b, c) \ - ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c)) -#define mt9t112_mcu_mask_set(ret, client, a, b, c) \ - ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c)) - -#define mt9t112_reg_read(ret, client, a) \ - ECHECKER(ret, __mt9t112_reg_read(client, a)) - -/* - * Logical address - */ -#define _VAR(id, offset, base) (base | (id & 0x1f) << 10 | (offset & 0x3ff)) -#define VAR(id, offset) _VAR(id, offset, 0x0000) -#define VAR8(id, offset) _VAR(id, offset, 0x8000) - -/************************************************************************ - struct -************************************************************************/ -struct mt9t112_format { - u32 code; - enum v4l2_colorspace colorspace; - u16 fmt; - u16 order; -}; - -struct mt9t112_priv { - struct v4l2_subdev subdev; - struct mt9t112_platform_data *info; - struct i2c_client *client; - struct v4l2_rect frame; - struct v4l2_clk *clk; - const struct mt9t112_format *format; - int num_formats; - u32 flags; -/* for flags */ -#define INIT_DONE (1 << 0) -#define PCLK_RISING (1 << 1) -}; - -/************************************************************************ - supported format -************************************************************************/ - -static const struct mt9t112_format mt9t112_cfmts[] = { - { - .code = MEDIA_BUS_FMT_UYVY8_2X8, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 1, - .order = 0, - }, { - .code = MEDIA_BUS_FMT_VYUY8_2X8, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 1, - .order = 1, - }, { - .code = MEDIA_BUS_FMT_YUYV8_2X8, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 1, - .order = 2, - }, { - .code = MEDIA_BUS_FMT_YVYU8_2X8, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 1, - .order = 3, - }, { - .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 8, - .order = 2, - }, { - .code = MEDIA_BUS_FMT_RGB565_2X8_LE, - .colorspace = V4L2_COLORSPACE_SRGB, - .fmt = 4, - .order = 2, - }, -}; - -/************************************************************************ - general function -************************************************************************/ -static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client) -{ - return container_of(i2c_get_clientdata(client), - struct mt9t112_priv, - subdev); -} - -static int __mt9t112_reg_read(const struct i2c_client *client, u16 command) -{ - struct i2c_msg msg[2]; - u8 buf[2]; - int ret; - - command = swab16(command); - - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = 2; - msg[0].buf = (u8 *)&command; - - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = 2; - msg[1].buf = buf; - - /* - * if return value of this function is < 0, - * it mean error. - * else, under 16bit is valid data. - */ - ret = i2c_transfer(client->adapter, msg, 2); - if (ret < 0) - return ret; - - memcpy(&ret, buf, 2); - return swab16(ret); -} - -static int __mt9t112_reg_write(const struct i2c_client *client, - u16 command, u16 data) -{ - struct i2c_msg msg; - u8 buf[4]; - int ret; - - command = swab16(command); - data = swab16(data); - - memcpy(buf + 0, &command, 2); - memcpy(buf + 2, &data, 2); - - msg.addr = client->addr; - msg.flags = 0; - msg.len = 4; - msg.buf = buf; - - /* - * i2c_transfer return message length, - * but this function should return 0 if correct case - */ - ret = i2c_transfer(client->adapter, &msg, 1); - if (ret >= 0) - ret = 0; - - return ret; -} - -static int __mt9t112_reg_mask_set(const struct i2c_client *client, - u16 command, - u16 mask, - u16 set) -{ - int val = __mt9t112_reg_read(client, command); - if (val < 0) - return val; - - val &= ~mask; - val |= set & mask; - - return __mt9t112_reg_write(client, command, val); -} - -/* mcu access */ -static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command) -{ - int ret; - - ret = __mt9t112_reg_write(client, 0x098E, command); - if (ret < 0) - return ret; - - return __mt9t112_reg_read(client, 0x0990); -} - -static int __mt9t112_mcu_write(const struct i2c_client *client, - u16 command, u16 data) -{ - int ret; - - ret = __mt9t112_reg_write(client, 0x098E, command); - if (ret < 0) - return ret; - - return __mt9t112_reg_write(client, 0x0990, data); -} - -static int __mt9t112_mcu_mask_set(const struct i2c_client *client, - u16 command, - u16 mask, - u16 set) -{ - int val = __mt9t112_mcu_read(client, command); - if (val < 0) - return val; - - val &= ~mask; - val |= set & mask; - - return __mt9t112_mcu_write(client, command, val); -} - -static int mt9t112_reset(const struct i2c_client *client) -{ - int ret; - - mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001); - msleep(1); - mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000); - - return ret; -} - -#ifndef EXT_CLOCK -#define CLOCK_INFO(a, b) -#else -#define CLOCK_INFO(a, b) mt9t112_clock_info(a, b) -static int mt9t112_clock_info(const struct i2c_client *client, u32 ext) -{ - int m, n, p1, p2, p3, p4, p5, p6, p7; - u32 vco, clk; - char *enable; - - ext /= 1000; /* kbyte order */ - - mt9t112_reg_read(n, client, 0x0012); - p1 = n & 0x000f; - n = n >> 4; - p2 = n & 0x000f; - n = n >> 4; - p3 = n & 0x000f; - - mt9t112_reg_read(n, client, 0x002a); - p4 = n & 0x000f; - n = n >> 4; - p5 = n & 0x000f; - n = n >> 4; - p6 = n & 0x000f; - - mt9t112_reg_read(n, client, 0x002c); - p7 = n & 0x000f; - - mt9t112_reg_read(n, client, 0x0010); - m = n & 0x00ff; - n = (n >> 8) & 0x003f; - - enable = ((6000 > ext) || (54000 < ext)) ? "X" : ""; - dev_dbg(&client->dev, "EXTCLK : %10u K %s\n", ext, enable); - - vco = 2 * m * ext / (n+1); - enable = ((384000 > vco) || (768000 < vco)) ? "X" : ""; - dev_dbg(&client->dev, "VCO : %10u K %s\n", vco, enable); - - clk = vco / (p1+1) / (p2+1); - enable = (96000 < clk) ? "X" : ""; - dev_dbg(&client->dev, "PIXCLK : %10u K %s\n", clk, enable); - - clk = vco / (p3+1); - enable = (768000 < clk) ? "X" : ""; - dev_dbg(&client->dev, "MIPICLK : %10u K %s\n", clk, enable); - - clk = vco / (p6+1); - enable = (96000 < clk) ? "X" : ""; - dev_dbg(&client->dev, "MCU CLK : %10u K %s\n", clk, enable); - - clk = vco / (p5+1); - enable = (54000 < clk) ? "X" : ""; - dev_dbg(&client->dev, "SOC CLK : %10u K %s\n", clk, enable); - - clk = vco / (p4+1); - enable = (70000 < clk) ? "X" : ""; - dev_dbg(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable); - - clk = vco / (p7+1); - dev_dbg(&client->dev, "External sensor : %10u K\n", clk); - - clk = ext / (n+1); - enable = ((2000 > clk) || (24000 < clk)) ? "X" : ""; - dev_dbg(&client->dev, "PFD : %10u K %s\n", clk, enable); - - return 0; -} -#endif - -static void mt9t112_frame_check(u32 *width, u32 *height, u32 *left, u32 *top) -{ - soc_camera_limit_side(left, width, 0, 0, MAX_WIDTH); - soc_camera_limit_side(top, height, 0, 0, MAX_HEIGHT); -} - -static int mt9t112_set_a_frame_size(const struct i2c_client *client, - u16 width, - u16 height) -{ - int ret; - u16 wstart = (MAX_WIDTH - width) / 2; - u16 hstart = (MAX_HEIGHT - height) / 2; - - /* (Context A) Image Width/Height */ - mt9t112_mcu_write(ret, client, VAR(26, 0), width); - mt9t112_mcu_write(ret, client, VAR(26, 2), height); - - /* (Context A) Output Width/Height */ - mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width); - mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height); - - /* (Context A) Start Row/Column */ - mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart); - mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart); - - /* (Context A) End Row/Column */ - mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart); - mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width + wstart); - - mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); - - return ret; -} - -static int mt9t112_set_pll_dividers(const struct i2c_client *client, - u8 m, u8 n, - u8 p1, u8 p2, u8 p3, - u8 p4, u8 p5, u8 p6, - u8 p7) -{ - int ret; - u16 val; - - /* N/M */ - val = (n << 8) | - (m << 0); - mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val); - - /* P1/P2/P3 */ - val = ((p3 & 0x0F) << 8) | - ((p2 & 0x0F) << 4) | - ((p1 & 0x0F) << 0); - mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val); - - /* P4/P5/P6 */ - val = (0x7 << 12) | - ((p6 & 0x0F) << 8) | - ((p5 & 0x0F) << 4) | - ((p4 & 0x0F) << 0); - mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val); - - /* P7 */ - val = (0x1 << 12) | - ((p7 & 0x0F) << 0); - mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val); - - return ret; -} - -static int mt9t112_init_pll(const struct i2c_client *client) -{ - struct mt9t112_priv *priv = to_mt9t112(client); - int data, i, ret; - - mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001); - - /* PLL control: BYPASS PLL = 8517 */ - mt9t112_reg_write(ret, client, 0x0014, 0x2145); - - /* Replace these registers when new timing parameters are generated */ - mt9t112_set_pll_dividers(client, - priv->info->divider.m, - priv->info->divider.n, - priv->info->divider.p1, - priv->info->divider.p2, - priv->info->divider.p3, - priv->info->divider.p4, - priv->info->divider.p5, - priv->info->divider.p6, - priv->info->divider.p7); - - /* - * TEST_BYPASS on - * PLL_ENABLE on - * SEL_LOCK_DET on - * TEST_BYPASS off - */ - mt9t112_reg_write(ret, client, 0x0014, 0x2525); - mt9t112_reg_write(ret, client, 0x0014, 0x2527); - mt9t112_reg_write(ret, client, 0x0014, 0x3427); - mt9t112_reg_write(ret, client, 0x0014, 0x3027); - - mdelay(10); - - /* - * PLL_BYPASS off - * Reference clock count - * I2C Master Clock Divider - */ - mt9t112_reg_write(ret, client, 0x0014, 0x3046); - mt9t112_reg_write(ret, client, 0x0016, 0x0400); /* JPEG initialization workaround */ - mt9t112_reg_write(ret, client, 0x0022, 0x0190); - mt9t112_reg_write(ret, client, 0x3B84, 0x0212); - - /* External sensor clock is PLL bypass */ - mt9t112_reg_write(ret, client, 0x002E, 0x0500); - - mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002); - mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004); - - /* MCU disabled */ - mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004); - - /* out of standby */ - mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0); - - mdelay(50); - - /* - * Standby Workaround - * Disable Secondary I2C Pads - */ - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - mt9t112_reg_write(ret, client, 0x0614, 0x0001); - mdelay(1); - - /* poll to verify out of standby. Must Poll this bit */ - for (i = 0; i < 100; i++) { - mt9t112_reg_read(data, client, 0x0018); - if (!(0x4000 & data)) - break; - - mdelay(10); - } - - return ret; -} - -static int mt9t112_init_setting(const struct i2c_client *client) -{ - - int ret; - - /* Adaptive Output Clock (A) */ - mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000); - - /* Read Mode (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024); - - /* Fine Correction (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC); - - /* Fine IT Min (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1); - - /* Fine IT Max Margin (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF); - - /* Base Frame Lines (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D); - - /* Min Line Length (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a); - - /* Line Length (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0); - - /* Adaptive Output Clock (B) */ - mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000); - - /* Row Start (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004); - - /* Column Start (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004); - - /* Row End (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B); - - /* Column End (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B); - - /* Fine Correction (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C); - - /* Fine IT Min (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1); - - /* Fine IT Max Margin (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF); - - /* Base Frame Lines (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668); - - /* Min Line Length (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0); - - /* Line Length (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0); - - /* - * Flicker Dectection registers - * This section should be replaced whenever new Timing file is generated - * All the following registers need to be replaced - * Following registers are generated from Register Wizard but user can - * modify them. For detail see auto flicker detection tuning - */ - - /* FD_FDPERIOD_SELECT */ - mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01); - - /* PRI_B_CONFIG_FD_ALGO_RUN */ - mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003); - - /* PRI_A_CONFIG_FD_ALGO_RUN */ - mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003); - - /* - * AFD range detection tuning registers - */ - - /* search_f1_50 */ - mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25); - - /* search_f2_50 */ - mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28); - - /* search_f1_60 */ - mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C); - - /* search_f2_60 */ - mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F); - - /* period_50Hz (A) */ - mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA); - - /* secret register by aptina */ - /* period_50Hz (A MSB) */ - mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00); - - /* period_60Hz (A) */ - mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B); - - /* secret register by aptina */ - /* period_60Hz (A MSB) */ - mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00); - - /* period_50Hz (B) */ - mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82); - - /* secret register by aptina */ - /* period_50Hz (B) MSB */ - mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00); - - /* period_60Hz (B) */ - mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D); - - /* secret register by aptina */ - /* period_60Hz (B) MSB */ - mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00); - - /* FD Mode */ - mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10); - - /* Stat_min */ - mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02); - - /* Stat_max */ - mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03); - - /* Min_amplitude */ - mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A); - - /* RX FIFO Watermark (A) */ - mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014); - - /* RX FIFO Watermark (B) */ - mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014); - - /* MCLK: 16MHz - * PCLK: 73MHz - * CorePixCLK: 36.5 MHz - */ - mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133); - mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110); - mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130); - mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108); - - mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27); - mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30); - mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32); - mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35); - - return ret; -} - -static int mt9t112_auto_focus_setting(const struct i2c_client *client) -{ - int ret; - - mt9t112_mcu_write(ret, client, VAR(12, 13), 0x000F); - mt9t112_mcu_write(ret, client, VAR(12, 23), 0x0F0F); - mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); - - mt9t112_reg_write(ret, client, 0x0614, 0x0000); - - mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); - mt9t112_mcu_write(ret, client, VAR8(12, 2), 0x02); - mt9t112_mcu_write(ret, client, VAR(12, 3), 0x0002); - mt9t112_mcu_write(ret, client, VAR(17, 3), 0x8001); - mt9t112_mcu_write(ret, client, VAR(17, 11), 0x0025); - mt9t112_mcu_write(ret, client, VAR(17, 13), 0x0193); - mt9t112_mcu_write(ret, client, VAR8(17, 33), 0x18); - mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); - - return ret; -} - -static int mt9t112_auto_focus_trigger(const struct i2c_client *client) -{ - int ret; - - mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01); - - return ret; -} - -static int mt9t112_init_camera(const struct i2c_client *client) -{ - int ret; - - ECHECKER(ret, mt9t112_reset(client)); - - ECHECKER(ret, mt9t112_init_pll(client)); - - ECHECKER(ret, mt9t112_init_setting(client)); - - ECHECKER(ret, mt9t112_auto_focus_setting(client)); - - mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0); - - /* Analog setting B */ - mt9t112_reg_write(ret, client, 0x3084, 0x2409); - mt9t112_reg_write(ret, client, 0x3092, 0x0A49); - mt9t112_reg_write(ret, client, 0x3094, 0x4949); - mt9t112_reg_write(ret, client, 0x3096, 0x4950); - - /* - * Disable adaptive clock - * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR - * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR - */ - mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E); - mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E); - - /* Configure STatus in Status_before_length Format and enable header */ - /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ - mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4); - - /* Enable JPEG in context B */ - /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ - mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01); - - /* Disable Dac_TXLO */ - mt9t112_reg_write(ret, client, 0x316C, 0x350F); - - /* Set max slew rates */ - mt9t112_reg_write(ret, client, 0x1E, 0x777); - - return ret; -} - -/************************************************************************ - v4l2_subdev_core_ops -************************************************************************/ - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int mt9t112_g_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - - reg->size = 2; - mt9t112_reg_read(ret, client, reg->reg); - - reg->val = (__u64)ret; - - return 0; -} - -static int mt9t112_s_register(struct v4l2_subdev *sd, - const struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - - mt9t112_reg_write(ret, client, reg->reg, reg->val); - - return ret; -} -#endif - -static int mt9t112_s_power(struct v4l2_subdev *sd, int on) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct mt9t112_priv *priv = to_mt9t112(client); - - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); -} - -static const struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { -#ifdef CONFIG_VIDEO_ADV_DEBUG - .g_register = mt9t112_g_register, - .s_register = mt9t112_s_register, -#endif - .s_power = mt9t112_s_power, -}; - - -/************************************************************************ - v4l2_subdev_video_ops -************************************************************************/ -static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - int ret = 0; - - if (!enable) { - /* FIXME - * - * If user selected large output size, - * and used it long time, - * mt9t112 camera will be very warm. - * - * But current driver can not stop mt9t112 camera. - * So, set small size here to solve this problem. - */ - mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT); - return ret; - } - - if (!(priv->flags & INIT_DONE)) { - u16 param = PCLK_RISING & priv->flags ? 0x0001 : 0x0000; - - ECHECKER(ret, mt9t112_init_camera(client)); - - /* Invert PCLK (Data sampled on falling edge of pixclk) */ - mt9t112_reg_write(ret, client, 0x3C20, param); - - mdelay(5); - - priv->flags |= INIT_DONE; - } - - mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt); - mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order); - mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); - - mt9t112_set_a_frame_size(client, - priv->frame.width, - priv->frame.height); - - ECHECKER(ret, mt9t112_auto_focus_trigger(client)); - - dev_dbg(&client->dev, "format : %d\n", priv->format->code); - dev_dbg(&client->dev, "size : %d x %d\n", - priv->frame.width, - priv->frame.height); - - CLOCK_INFO(client, EXT_CLOCK); - - return ret; -} - -static int mt9t112_set_params(struct mt9t112_priv *priv, - const struct v4l2_rect *rect, - u32 code) -{ - int i; - - /* - * get color format - */ - for (i = 0; i < priv->num_formats; i++) - if (mt9t112_cfmts[i].code == code) - break; - - if (i == priv->num_formats) - return -EINVAL; - - priv->frame = *rect; - - /* - * frame size check - */ - mt9t112_frame_check(&priv->frame.width, &priv->frame.height, - &priv->frame.left, &priv->frame.top); - - priv->format = mt9t112_cfmts + i; - - return 0; -} - -static int mt9t112_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP_BOUNDS: - sel->r.left = 0; - sel->r.top = 0; - sel->r.width = MAX_WIDTH; - sel->r.height = MAX_HEIGHT; - return 0; - case V4L2_SEL_TGT_CROP: - sel->r = priv->frame; - return 0; - default: - return -EINVAL; - } -} - -static int mt9t112_set_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - const struct v4l2_rect *rect = &sel->r; - - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || - sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - return mt9t112_set_params(priv, rect, priv->format->code); -} - -static int mt9t112_get_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct v4l2_mbus_framefmt *mf = &format->format; - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - - if (format->pad) - return -EINVAL; - - mf->width = priv->frame.width; - mf->height = priv->frame.height; - mf->colorspace = priv->format->colorspace; - mf->code = priv->format->code; - mf->field = V4L2_FIELD_NONE; - - return 0; -} - -static int mt9t112_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - struct v4l2_rect rect = { - .width = mf->width, - .height = mf->height, - .left = priv->frame.left, - .top = priv->frame.top, - }; - int ret; - - ret = mt9t112_set_params(priv, &rect, mf->code); - - if (!ret) - mf->colorspace = priv->format->colorspace; - - return ret; -} - -static int mt9t112_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct v4l2_mbus_framefmt *mf = &format->format; - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - unsigned int top, left; - int i; - - if (format->pad) - return -EINVAL; - - for (i = 0; i < priv->num_formats; i++) - if (mt9t112_cfmts[i].code == mf->code) - break; - - if (i == priv->num_formats) { - mf->code = MEDIA_BUS_FMT_UYVY8_2X8; - mf->colorspace = V4L2_COLORSPACE_JPEG; - } else { - mf->colorspace = mt9t112_cfmts[i].colorspace; - } - - mt9t112_frame_check(&mf->width, &mf->height, &left, &top); - - mf->field = V4L2_FIELD_NONE; - - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return mt9t112_s_fmt(sd, mf); - cfg->try_fmt = *mf; - return 0; -} - -static int mt9t112_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_mbus_code_enum *code) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9t112_priv *priv = to_mt9t112(client); - - if (code->pad || code->index >= priv->num_formats) - return -EINVAL; - - code->code = mt9t112_cfmts[code->index].code; - - return 0; -} - -static int mt9t112_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH | - V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING; - cfg->type = V4L2_MBUS_PARALLEL; - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); - - return 0; -} - -static int mt9t112_s_mbus_config(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct mt9t112_priv *priv = to_mt9t112(client); - - if (soc_camera_apply_board_flags(ssdd, cfg) & V4L2_MBUS_PCLK_SAMPLE_RISING) - priv->flags |= PCLK_RISING; - - return 0; -} - -static const struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { - .s_stream = mt9t112_s_stream, - .g_mbus_config = mt9t112_g_mbus_config, - .s_mbus_config = mt9t112_s_mbus_config, -}; - -static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { - .enum_mbus_code = mt9t112_enum_mbus_code, - .get_selection = mt9t112_get_selection, - .set_selection = mt9t112_set_selection, - .get_fmt = mt9t112_get_fmt, - .set_fmt = mt9t112_set_fmt, -}; - -/************************************************************************ - i2c driver -************************************************************************/ -static const struct v4l2_subdev_ops mt9t112_subdev_ops = { - .core = &mt9t112_subdev_core_ops, - .video = &mt9t112_subdev_video_ops, - .pad = &mt9t112_subdev_pad_ops, -}; - -static int mt9t112_camera_probe(struct i2c_client *client) -{ - struct mt9t112_priv *priv = to_mt9t112(client); - const char *devname; - int chipid; - int ret; - - ret = mt9t112_s_power(&priv->subdev, 1); - if (ret < 0) - return ret; - - /* - * check and show chip ID - */ - mt9t112_reg_read(chipid, client, 0x0000); - - switch (chipid) { - case 0x2680: - devname = "mt9t111"; - priv->num_formats = 1; - break; - case 0x2682: - devname = "mt9t112"; - priv->num_formats = ARRAY_SIZE(mt9t112_cfmts); - break; - default: - dev_err(&client->dev, "Product ID error %04x\n", chipid); - ret = -ENODEV; - goto done; - } - - dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid); - -done: - mt9t112_s_power(&priv->subdev, 0); - return ret; -} - -static int mt9t112_probe(struct i2c_client *client, - const struct i2c_device_id *did) -{ - struct mt9t112_priv *priv; - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct v4l2_rect rect = { - .width = VGA_WIDTH, - .height = VGA_HEIGHT, - .left = (MAX_WIDTH - VGA_WIDTH) / 2, - .top = (MAX_HEIGHT - VGA_HEIGHT) / 2, - }; - int ret; - - if (!ssdd || !ssdd->drv_priv) { - dev_err(&client->dev, "mt9t112: missing platform data!\n"); - return -EINVAL; - } - - priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->info = ssdd->drv_priv; - - v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); - - priv->clk = v4l2_clk_get(&client->dev, "mclk"); - if (IS_ERR(priv->clk)) - return PTR_ERR(priv->clk); - - ret = mt9t112_camera_probe(client); - - /* Cannot fail: using the default supported pixel code */ - if (!ret) - mt9t112_set_params(priv, &rect, MEDIA_BUS_FMT_UYVY8_2X8); - else - v4l2_clk_put(priv->clk); - - return ret; -} - -static int mt9t112_remove(struct i2c_client *client) -{ - struct mt9t112_priv *priv = to_mt9t112(client); - - v4l2_clk_put(priv->clk); - return 0; -} - -static const struct i2c_device_id mt9t112_id[] = { - { "mt9t112", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mt9t112_id); - -static struct i2c_driver mt9t112_i2c_driver = { - .driver = { - .name = "mt9t112", - }, - .probe = mt9t112_probe, - .remove = mt9t112_remove, - .id_table = mt9t112_id, -}; - -module_i2c_driver(mt9t112_i2c_driver); - -MODULE_DESCRIPTION("SoC Camera driver for mt9t112"); -MODULE_AUTHOR("Kuninori Morimoto"); -MODULE_LICENSE("GPL v2");

[2/8] soc_mt9t112: remove obsolete sensor driver

Commit Message

Patch