From patchwork Thu Jan 17 16:17:59 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 10768505 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 021BA17FB for ; Thu, 17 Jan 2019 16:18:14 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E3F4630189 for ; Thu, 17 Jan 2019 16:18:13 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id D893E3030D; Thu, 17 Jan 2019 16:18:13 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id AD0FF3032A for ; Thu, 17 Jan 2019 16:18:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729057AbfAQQSK (ORCPT ); Thu, 17 Jan 2019 11:18:10 -0500 Received: from lb2-smtp-cloud8.xs4all.net ([194.109.24.25]:43162 "EHLO lb2-smtp-cloud8.xs4all.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728824AbfAQQSJ (ORCPT ); Thu, 17 Jan 2019 11:18:09 -0500 Received: from marune.fritz.box ([IPv6:2001:983:e9a7:1:3849:86c5:b8c2:266c]) by smtp-cloud8.xs4all.net with ESMTPA id kAMkgeAhPNR5ykAMngTv17; Thu, 17 Jan 2019 17:18:05 +0100 From: hverkuil-cisco@xs4all.nl To: linux-media@vger.kernel.org Cc: Jacopo Mondi , Sakari Ailus , Hans Verkuil Subject: [PATCH 5/8] soc_tw9910: remove obsolete sensor driver Date: Thu, 17 Jan 2019 17:17:59 +0100 Message-Id: <20190117161802.5740-6-hverkuil-cisco@xs4all.nl> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190117161802.5740-1-hverkuil-cisco@xs4all.nl> References: <20190117161802.5740-1-hverkuil-cisco@xs4all.nl> MIME-Version: 1.0 X-CMAE-Envelope: MS4wfNXVrFOTWLJKQxd/CmlGj4OfRj1lc0E0SZWeAKQVbsOP5Be0+ePytfdnAu94IDQqeF2rm5ofTyfB53f7u0nnqFiSPZcf1qK1DH7C2W2mlVbwoek6SAcy HeLx4ckB8FZP/w0OMW3/pS7oIqhdHjoS8FsgbEY5b3pqytVq9jucFtM82tXxQ5YaK26w9IXkNBuy69ApCieWIqjVjAcdGSAlzkL2QqGfr9DhEOf4IyZLqTlX 5/Alh2c7N/4Xp0p4cZ2nf999H0CQgW3ZW1fzRQQtwlgcKEalOQxmTksyfjjvefltSPSYLCtPxcgdLNy0GYchPLOwwZ/iLRkhG2Ycmt0NXlVSZdeNiH21qiLY DEIhc2rbLbdmgyPPUQy9GsDumMipYQ== Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Hans Verkuil This driver got converted to not depend on soc_camera in commit 7b20f325a566 ("media: i2c: tw9910: Remove soc_camera dependencies"). There's no sense in keeping the old version there. Signed-off-by: Hans Verkuil --- drivers/media/i2c/soc_camera/Kconfig | 6 - drivers/media/i2c/soc_camera/Makefile | 1 - drivers/media/i2c/soc_camera/soc_tw9910.c | 999 ---------------------- 3 files changed, 1006 deletions(-) delete mode 100644 drivers/media/i2c/soc_camera/soc_tw9910.c diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig index 62a6562f4f0c..dea66ef1394d 100644 --- a/drivers/media/i2c/soc_camera/Kconfig +++ b/drivers/media/i2c/soc_camera/Kconfig @@ -40,9 +40,3 @@ config SOC_CAMERA_RJ54N1 depends on SOC_CAMERA && I2C help This is a rj54n1cb0c video driver - -config SOC_CAMERA_TW9910 - tristate "tw9910 support" - depends on SOC_CAMERA && I2C - help - This is a tw9910 video driver diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile index 1e82912c5b05..94659f7aa195 100644 --- a/drivers/media/i2c/soc_camera/Makefile +++ b/drivers/media/i2c/soc_camera/Makefile @@ -4,4 +4,3 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += soc_mt9v022.o obj-$(CONFIG_SOC_CAMERA_OV5642) += soc_ov5642.o obj-$(CONFIG_SOC_CAMERA_OV9740) += soc_ov9740.o obj-$(CONFIG_SOC_CAMERA_RJ54N1) += soc_rj54n1cb0c.o -obj-$(CONFIG_SOC_CAMERA_TW9910) += soc_tw9910.o diff --git a/drivers/media/i2c/soc_camera/soc_tw9910.c b/drivers/media/i2c/soc_camera/soc_tw9910.c deleted file mode 100644 index bdb5e0a431e9..000000000000 --- a/drivers/media/i2c/soc_camera/soc_tw9910.c +++ /dev/null @@ -1,999 +0,0 @@ -/* - * tw9910 Video Driver - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Kuninori Morimoto - * - * Based on ov772x driver, - * - * Copyright (C) 2008 Kuninori Morimoto - * Copyright 2006-7 Jonathan Corbet - * Copyright (C) 2008 Magnus Damm - * Copyright (C) 2008, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define GET_ID(val) ((val & 0xF8) >> 3) -#define GET_REV(val) (val & 0x07) - -/* - * register offset - */ -#define ID 0x00 /* Product ID Code Register */ -#define STATUS1 0x01 /* Chip Status Register I */ -#define INFORM 0x02 /* Input Format */ -#define OPFORM 0x03 /* Output Format Control Register */ -#define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */ -#define OUTCTR1 0x05 /* Output Control I */ -#define ACNTL1 0x06 /* Analog Control Register 1 */ -#define CROP_HI 0x07 /* Cropping Register, High */ -#define VDELAY_LO 0x08 /* Vertical Delay Register, Low */ -#define VACTIVE_LO 0x09 /* Vertical Active Register, Low */ -#define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */ -#define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */ -#define CNTRL1 0x0C /* Control Register I */ -#define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */ -#define SCALE_HI 0x0E /* Scaling Register, High */ -#define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */ -#define BRIGHT 0x10 /* BRIGHTNESS Control Register */ -#define CONTRAST 0x11 /* CONTRAST Control Register */ -#define SHARPNESS 0x12 /* SHARPNESS Control Register I */ -#define SAT_U 0x13 /* Chroma (U) Gain Register */ -#define SAT_V 0x14 /* Chroma (V) Gain Register */ -#define HUE 0x15 /* Hue Control Register */ -#define CORING1 0x17 -#define CORING2 0x18 /* Coring and IF compensation */ -#define VBICNTL 0x19 /* VBI Control Register */ -#define ACNTL2 0x1A /* Analog Control 2 */ -#define OUTCTR2 0x1B /* Output Control 2 */ -#define SDT 0x1C /* Standard Selection */ -#define SDTR 0x1D /* Standard Recognition */ -#define TEST 0x1F /* Test Control Register */ -#define CLMPG 0x20 /* Clamping Gain */ -#define IAGC 0x21 /* Individual AGC Gain */ -#define AGCGAIN 0x22 /* AGC Gain */ -#define PEAKWT 0x23 /* White Peak Threshold */ -#define CLMPL 0x24 /* Clamp level */ -#define SYNCT 0x25 /* Sync Amplitude */ -#define MISSCNT 0x26 /* Sync Miss Count Register */ -#define PCLAMP 0x27 /* Clamp Position Register */ -#define VCNTL1 0x28 /* Vertical Control I */ -#define VCNTL2 0x29 /* Vertical Control II */ -#define CKILL 0x2A /* Color Killer Level Control */ -#define COMB 0x2B /* Comb Filter Control */ -#define LDLY 0x2C /* Luma Delay and H Filter Control */ -#define MISC1 0x2D /* Miscellaneous Control I */ -#define LOOP 0x2E /* LOOP Control Register */ -#define MISC2 0x2F /* Miscellaneous Control II */ -#define MVSN 0x30 /* Macrovision Detection */ -#define STATUS2 0x31 /* Chip STATUS II */ -#define HFREF 0x32 /* H monitor */ -#define CLMD 0x33 /* CLAMP MODE */ -#define IDCNTL 0x34 /* ID Detection Control */ -#define CLCNTL1 0x35 /* Clamp Control I */ -#define ANAPLLCTL 0x4C -#define VBIMIN 0x4D -#define HSLOWCTL 0x4E -#define WSS3 0x4F -#define FILLDATA 0x50 -#define SDID 0x51 -#define DID 0x52 -#define WSS1 0x53 -#define WSS2 0x54 -#define VVBI 0x55 -#define LCTL6 0x56 -#define LCTL7 0x57 -#define LCTL8 0x58 -#define LCTL9 0x59 -#define LCTL10 0x5A -#define LCTL11 0x5B -#define LCTL12 0x5C -#define LCTL13 0x5D -#define LCTL14 0x5E -#define LCTL15 0x5F -#define LCTL16 0x60 -#define LCTL17 0x61 -#define LCTL18 0x62 -#define LCTL19 0x63 -#define LCTL20 0x64 -#define LCTL21 0x65 -#define LCTL22 0x66 -#define LCTL23 0x67 -#define LCTL24 0x68 -#define LCTL25 0x69 -#define LCTL26 0x6A -#define HSBEGIN 0x6B -#define HSEND 0x6C -#define OVSDLY 0x6D -#define OVSEND 0x6E -#define VBIDELAY 0x6F - -/* - * register detail - */ - -/* INFORM */ -#define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */ -#define FC27_FF 0x00 /* 0 : Square pixel mode. */ - /* Must use 24.54MHz for 60Hz field rate */ - /* source or 29.5MHz for 50Hz field rate */ -#define IFSEL_S 0x10 /* 01 : S-video decoding */ -#define IFSEL_C 0x00 /* 00 : Composite video decoding */ - /* Y input video selection */ -#define YSEL_M0 0x00 /* 00 : Mux0 selected */ -#define YSEL_M1 0x04 /* 01 : Mux1 selected */ -#define YSEL_M2 0x08 /* 10 : Mux2 selected */ -#define YSEL_M3 0x10 /* 11 : Mux3 selected */ - -/* OPFORM */ -#define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */ - /* 1 : ITU-R-656 compatible data sequence format */ -#define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */ - /* 1 : 16-bit YCrCb 4:2:2 output format.*/ -#define LLCMODE 0x20 /* 1 : LLC output mode. */ - /* 0 : free-run output mode */ -#define AINC 0x10 /* Serial interface auto-indexing control */ - /* 0 : auto-increment */ - /* 1 : non-auto */ -#define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */ - /* 0 : Vertical out ctrl by HACTIVE and DVALID */ -#define OEN_TRI_SEL_MASK 0x07 -#define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */ -#define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */ -#define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */ - -/* OUTCTR1 */ -#define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */ -#define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */ - /* VS pin output control */ -#define VSSL_VSYNC 0x00 /* 0 : VSYNC */ -#define VSSL_VACT 0x10 /* 1 : VACT */ -#define VSSL_FIELD 0x20 /* 2 : FIELD */ -#define VSSL_VVALID 0x30 /* 3 : VVALID */ -#define VSSL_ZERO 0x70 /* 7 : 0 */ -#define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */ -#define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/ - /* HS pin output control */ -#define HSSL_HACT 0x00 /* 0 : HACT */ -#define HSSL_HSYNC 0x01 /* 1 : HSYNC */ -#define HSSL_DVALID 0x02 /* 2 : DVALID */ -#define HSSL_HLOCK 0x03 /* 3 : HLOCK */ -#define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */ -#define HSSL_ZERO 0x07 /* 7 : 0 */ - -/* ACNTL1 */ -#define SRESET 0x80 /* resets the device to its default state - * but all register content remain unchanged. - * This bit is self-resetting. - */ -#define ACNTL1_PDN_MASK 0x0e -#define CLK_PDN 0x08 /* system clock power down */ -#define Y_PDN 0x04 /* Luma ADC power down */ -#define C_PDN 0x02 /* Chroma ADC power down */ - -/* ACNTL2 */ -#define ACNTL2_PDN_MASK 0x40 -#define PLL_PDN 0x40 /* PLL power down */ - -/* VBICNTL */ - -/* RTSEL : control the real time signal output from the MPOUT pin */ -#define RTSEL_MASK 0x07 -#define RTSEL_VLOSS 0x00 /* 0000 = Video loss */ -#define RTSEL_HLOCK 0x01 /* 0001 = H-lock */ -#define RTSEL_SLOCK 0x02 /* 0010 = S-lock */ -#define RTSEL_VLOCK 0x03 /* 0011 = V-lock */ -#define RTSEL_MONO 0x04 /* 0100 = MONO */ -#define RTSEL_DET50 0x05 /* 0101 = DET50 */ -#define RTSEL_FIELD 0x06 /* 0110 = FIELD */ -#define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */ - -/* HSYNC start and end are constant for now */ -#define HSYNC_START 0x0260 -#define HSYNC_END 0x0300 - -/* - * structure - */ - -struct regval_list { - unsigned char reg_num; - unsigned char value; -}; - -struct tw9910_scale_ctrl { - char *name; - unsigned short width; - unsigned short height; - u16 hscale; - u16 vscale; -}; - -struct tw9910_priv { - struct v4l2_subdev subdev; - struct v4l2_clk *clk; - struct tw9910_video_info *info; - const struct tw9910_scale_ctrl *scale; - v4l2_std_id norm; - u32 revision; -}; - -static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = { - { - .name = "NTSC SQ", - .width = 640, - .height = 480, - .hscale = 0x0100, - .vscale = 0x0100, - }, - { - .name = "NTSC CCIR601", - .width = 720, - .height = 480, - .hscale = 0x0100, - .vscale = 0x0100, - }, - { - .name = "NTSC SQ (CIF)", - .width = 320, - .height = 240, - .hscale = 0x0200, - .vscale = 0x0200, - }, - { - .name = "NTSC CCIR601 (CIF)", - .width = 360, - .height = 240, - .hscale = 0x0200, - .vscale = 0x0200, - }, - { - .name = "NTSC SQ (QCIF)", - .width = 160, - .height = 120, - .hscale = 0x0400, - .vscale = 0x0400, - }, - { - .name = "NTSC CCIR601 (QCIF)", - .width = 180, - .height = 120, - .hscale = 0x0400, - .vscale = 0x0400, - }, -}; - -static const struct tw9910_scale_ctrl tw9910_pal_scales[] = { - { - .name = "PAL SQ", - .width = 768, - .height = 576, - .hscale = 0x0100, - .vscale = 0x0100, - }, - { - .name = "PAL CCIR601", - .width = 720, - .height = 576, - .hscale = 0x0100, - .vscale = 0x0100, - }, - { - .name = "PAL SQ (CIF)", - .width = 384, - .height = 288, - .hscale = 0x0200, - .vscale = 0x0200, - }, - { - .name = "PAL CCIR601 (CIF)", - .width = 360, - .height = 288, - .hscale = 0x0200, - .vscale = 0x0200, - }, - { - .name = "PAL SQ (QCIF)", - .width = 192, - .height = 144, - .hscale = 0x0400, - .vscale = 0x0400, - }, - { - .name = "PAL CCIR601 (QCIF)", - .width = 180, - .height = 144, - .hscale = 0x0400, - .vscale = 0x0400, - }, -}; - -/* - * general function - */ -static struct tw9910_priv *to_tw9910(const struct i2c_client *client) -{ - return container_of(i2c_get_clientdata(client), struct tw9910_priv, - subdev); -} - -static int tw9910_mask_set(struct i2c_client *client, u8 command, - u8 mask, u8 set) -{ - s32 val = i2c_smbus_read_byte_data(client, command); - if (val < 0) - return val; - - val &= ~mask; - val |= set & mask; - - return i2c_smbus_write_byte_data(client, command, val); -} - -static int tw9910_set_scale(struct i2c_client *client, - const struct tw9910_scale_ctrl *scale) -{ - int ret; - - ret = i2c_smbus_write_byte_data(client, SCALE_HI, - (scale->vscale & 0x0F00) >> 4 | - (scale->hscale & 0x0F00) >> 8); - if (ret < 0) - return ret; - - ret = i2c_smbus_write_byte_data(client, HSCALE_LO, - scale->hscale & 0x00FF); - if (ret < 0) - return ret; - - ret = i2c_smbus_write_byte_data(client, VSCALE_LO, - scale->vscale & 0x00FF); - - return ret; -} - -static int tw9910_set_hsync(struct i2c_client *client) -{ - struct tw9910_priv *priv = to_tw9910(client); - int ret; - - /* bit 10 - 3 */ - ret = i2c_smbus_write_byte_data(client, HSBEGIN, - (HSYNC_START & 0x07F8) >> 3); - if (ret < 0) - return ret; - - /* bit 10 - 3 */ - ret = i2c_smbus_write_byte_data(client, HSEND, - (HSYNC_END & 0x07F8) >> 3); - if (ret < 0) - return ret; - - /* So far only revisions 0 and 1 have been seen */ - /* bit 2 - 0 */ - if (1 == priv->revision) - ret = tw9910_mask_set(client, HSLOWCTL, 0x77, - (HSYNC_START & 0x0007) << 4 | - (HSYNC_END & 0x0007)); - - return ret; -} - -static void tw9910_reset(struct i2c_client *client) -{ - tw9910_mask_set(client, ACNTL1, SRESET, SRESET); - msleep(1); -} - -static int tw9910_power(struct i2c_client *client, int enable) -{ - int ret; - u8 acntl1; - u8 acntl2; - - if (enable) { - acntl1 = 0; - acntl2 = 0; - } else { - acntl1 = CLK_PDN | Y_PDN | C_PDN; - acntl2 = PLL_PDN; - } - - ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1); - if (ret < 0) - return ret; - - return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2); -} - -static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm, - u32 width, u32 height) -{ - const struct tw9910_scale_ctrl *scale; - const struct tw9910_scale_ctrl *ret = NULL; - __u32 diff = 0xffffffff, tmp; - int size, i; - - if (norm & V4L2_STD_NTSC) { - scale = tw9910_ntsc_scales; - size = ARRAY_SIZE(tw9910_ntsc_scales); - } else if (norm & V4L2_STD_PAL) { - scale = tw9910_pal_scales; - size = ARRAY_SIZE(tw9910_pal_scales); - } else { - return NULL; - } - - for (i = 0; i < size; i++) { - tmp = abs(width - scale[i].width) + - abs(height - scale[i].height); - if (tmp < diff) { - diff = tmp; - ret = scale + i; - } - } - - return ret; -} - -/* - * subdevice operations - */ -static int tw9910_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - u8 val; - int ret; - - if (!enable) { - switch (priv->revision) { - case 0: - val = OEN_TRI_SEL_ALL_OFF_r0; - break; - case 1: - val = OEN_TRI_SEL_ALL_OFF_r1; - break; - default: - dev_err(&client->dev, "un-supported revision\n"); - return -EINVAL; - } - } else { - val = OEN_TRI_SEL_ALL_ON; - - if (!priv->scale) { - dev_err(&client->dev, "norm select error\n"); - return -EPERM; - } - - dev_dbg(&client->dev, "%s %dx%d\n", - priv->scale->name, - priv->scale->width, - priv->scale->height); - } - - ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val); - if (ret < 0) - return ret; - - return tw9910_power(client, enable); -} - -static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - - *norm = priv->norm; - - return 0; -} - -static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - const unsigned hact = 720; - const unsigned hdelay = 15; - unsigned vact; - unsigned vdelay; - int ret; - - if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) - return -EINVAL; - - priv->norm = norm; - if (norm & V4L2_STD_525_60) { - vact = 240; - vdelay = 18; - ret = tw9910_mask_set(client, VVBI, 0x10, 0x10); - } else { - vact = 288; - vdelay = 24; - ret = tw9910_mask_set(client, VVBI, 0x10, 0x00); - } - if (!ret) - ret = i2c_smbus_write_byte_data(client, CROP_HI, - ((vdelay >> 2) & 0xc0) | - ((vact >> 4) & 0x30) | - ((hdelay >> 6) & 0x0c) | - ((hact >> 8) & 0x03)); - if (!ret) - ret = i2c_smbus_write_byte_data(client, VDELAY_LO, - vdelay & 0xff); - if (!ret) - ret = i2c_smbus_write_byte_data(client, VACTIVE_LO, - vact & 0xff); - - return ret; -} - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int tw9910_g_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - - if (reg->reg > 0xff) - return -EINVAL; - - reg->size = 1; - ret = i2c_smbus_read_byte_data(client, reg->reg); - if (ret < 0) - return ret; - - /* - * ret = int - * reg->val = __u64 - */ - reg->val = (__u64)ret; - - return 0; -} - -static int tw9910_s_register(struct v4l2_subdev *sd, - const struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (reg->reg > 0xff || - reg->val > 0xff) - return -EINVAL; - - return i2c_smbus_write_byte_data(client, reg->reg, reg->val); -} -#endif - -static int tw9910_s_power(struct v4l2_subdev *sd, int on) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - struct tw9910_priv *priv = to_tw9910(client); - - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); -} - -static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - int ret = -EINVAL; - u8 val; - - /* - * select suitable norm - */ - priv->scale = tw9910_select_norm(priv->norm, *width, *height); - if (!priv->scale) - goto tw9910_set_fmt_error; - - /* - * reset hardware - */ - tw9910_reset(client); - - /* - * set bus width - */ - val = 0x00; - if (SOCAM_DATAWIDTH_16 == priv->info->buswidth) - val = LEN; - - ret = tw9910_mask_set(client, OPFORM, LEN, val); - if (ret < 0) - goto tw9910_set_fmt_error; - - /* - * select MPOUT behavior - */ - switch (priv->info->mpout) { - case TW9910_MPO_VLOSS: - val = RTSEL_VLOSS; break; - case TW9910_MPO_HLOCK: - val = RTSEL_HLOCK; break; - case TW9910_MPO_SLOCK: - val = RTSEL_SLOCK; break; - case TW9910_MPO_VLOCK: - val = RTSEL_VLOCK; break; - case TW9910_MPO_MONO: - val = RTSEL_MONO; break; - case TW9910_MPO_DET50: - val = RTSEL_DET50; break; - case TW9910_MPO_FIELD: - val = RTSEL_FIELD; break; - case TW9910_MPO_RTCO: - val = RTSEL_RTCO; break; - default: - val = 0; - } - - ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val); - if (ret < 0) - goto tw9910_set_fmt_error; - - /* - * set scale - */ - ret = tw9910_set_scale(client, priv->scale); - if (ret < 0) - goto tw9910_set_fmt_error; - - /* - * set hsync - */ - ret = tw9910_set_hsync(client); - if (ret < 0) - goto tw9910_set_fmt_error; - - *width = priv->scale->width; - *height = priv->scale->height; - - return ret; - -tw9910_set_fmt_error: - - tw9910_reset(client); - priv->scale = NULL; - - return ret; -} - -static int tw9910_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_selection *sel) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) - return -EINVAL; - /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported */ - if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS) - return -EINVAL; - - sel->r.left = 0; - sel->r.top = 0; - if (priv->norm & V4L2_STD_NTSC) { - sel->r.width = 640; - sel->r.height = 480; - } else { - sel->r.width = 768; - sel->r.height = 576; - } - return 0; -} - -static int tw9910_get_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct v4l2_mbus_framefmt *mf = &format->format; - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - - if (format->pad) - return -EINVAL; - - if (!priv->scale) { - priv->scale = tw9910_select_norm(priv->norm, 640, 480); - if (!priv->scale) - return -EINVAL; - } - - mf->width = priv->scale->width; - mf->height = priv->scale->height; - mf->code = MEDIA_BUS_FMT_UYVY8_2X8; - mf->colorspace = V4L2_COLORSPACE_SMPTE170M; - mf->field = V4L2_FIELD_INTERLACED_BT; - - return 0; -} - -static int tw9910_s_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) -{ - u32 width = mf->width, height = mf->height; - int ret; - - WARN_ON(mf->field != V4L2_FIELD_ANY && - mf->field != V4L2_FIELD_INTERLACED_BT); - - /* - * check color format - */ - if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8) - return -EINVAL; - - mf->colorspace = V4L2_COLORSPACE_SMPTE170M; - - ret = tw9910_set_frame(sd, &width, &height); - if (!ret) { - mf->width = width; - mf->height = height; - } - return ret; -} - -static int tw9910_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) -{ - struct v4l2_mbus_framefmt *mf = &format->format; - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct tw9910_priv *priv = to_tw9910(client); - const struct tw9910_scale_ctrl *scale; - - if (format->pad) - return -EINVAL; - - if (V4L2_FIELD_ANY == mf->field) { - mf->field = V4L2_FIELD_INTERLACED_BT; - } else if (V4L2_FIELD_INTERLACED_BT != mf->field) { - dev_err(&client->dev, "Field type %d invalid.\n", mf->field); - return -EINVAL; - } - - mf->code = MEDIA_BUS_FMT_UYVY8_2X8; - mf->colorspace = V4L2_COLORSPACE_SMPTE170M; - - /* - * select suitable norm - */ - scale = tw9910_select_norm(priv->norm, mf->width, mf->height); - if (!scale) - return -EINVAL; - - mf->width = scale->width; - mf->height = scale->height; - - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return tw9910_s_fmt(sd, mf); - cfg->try_fmt = *mf; - return 0; -} - -static int tw9910_video_probe(struct i2c_client *client) -{ - struct tw9910_priv *priv = to_tw9910(client); - s32 id; - int ret; - - /* - * tw9910 only use 8 or 16 bit bus width - */ - if (SOCAM_DATAWIDTH_16 != priv->info->buswidth && - SOCAM_DATAWIDTH_8 != priv->info->buswidth) { - dev_err(&client->dev, "bus width error\n"); - return -ENODEV; - } - - ret = tw9910_s_power(&priv->subdev, 1); - if (ret < 0) - return ret; - - /* - * check and show Product ID - * So far only revisions 0 and 1 have been seen - */ - id = i2c_smbus_read_byte_data(client, ID); - priv->revision = GET_REV(id); - id = GET_ID(id); - - if (0x0B != id || - 0x01 < priv->revision) { - dev_err(&client->dev, - "Product ID error %x:%x\n", - id, priv->revision); - ret = -ENODEV; - goto done; - } - - dev_info(&client->dev, - "tw9910 Product ID %0x:%0x\n", id, priv->revision); - - priv->norm = V4L2_STD_NTSC; - priv->scale = &tw9910_ntsc_scales[0]; - -done: - tw9910_s_power(&priv->subdev, 0); - return ret; -} - -static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { -#ifdef CONFIG_VIDEO_ADV_DEBUG - .g_register = tw9910_g_register, - .s_register = tw9910_s_register, -#endif - .s_power = tw9910_s_power, -}; - -static int tw9910_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_mbus_code_enum *code) -{ - if (code->pad || code->index) - return -EINVAL; - - code->code = MEDIA_BUS_FMT_UYVY8_2X8; - return 0; -} - -static int tw9910_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | - V4L2_MBUS_DATA_ACTIVE_HIGH; - cfg->type = V4L2_MBUS_PARALLEL; - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); - - return 0; -} - -static int tw9910_s_mbus_config(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - u8 val = VSSL_VVALID | HSSL_DVALID; - unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg); - - /* - * set OUTCTR1 - * - * We use VVALID and DVALID signals to control VSYNC and HSYNC - * outputs, in this mode their polarity is inverted. - */ - if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) - val |= HSP_HI; - - if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) - val |= VSP_HI; - - return i2c_smbus_write_byte_data(client, OUTCTR1, val); -} - -static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) -{ - *norm = V4L2_STD_NTSC | V4L2_STD_PAL; - return 0; -} - -static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { - .s_std = tw9910_s_std, - .g_std = tw9910_g_std, - .s_stream = tw9910_s_stream, - .g_mbus_config = tw9910_g_mbus_config, - .s_mbus_config = tw9910_s_mbus_config, - .g_tvnorms = tw9910_g_tvnorms, -}; - -static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { - .enum_mbus_code = tw9910_enum_mbus_code, - .get_selection = tw9910_get_selection, - .get_fmt = tw9910_get_fmt, - .set_fmt = tw9910_set_fmt, -}; - -static const struct v4l2_subdev_ops tw9910_subdev_ops = { - .core = &tw9910_subdev_core_ops, - .video = &tw9910_subdev_video_ops, - .pad = &tw9910_subdev_pad_ops, -}; - -/* - * i2c_driver function - */ - -static int tw9910_probe(struct i2c_client *client, - const struct i2c_device_id *did) - -{ - struct tw9910_priv *priv; - struct tw9910_video_info *info; - struct i2c_adapter *adapter = - to_i2c_adapter(client->dev.parent); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - int ret; - - if (!ssdd || !ssdd->drv_priv) { - dev_err(&client->dev, "TW9910: missing platform data!\n"); - return -EINVAL; - } - - info = ssdd->drv_priv; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(&client->dev, - "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n"); - return -EIO; - } - - priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->info = info; - - v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops); - - priv->clk = v4l2_clk_get(&client->dev, "mclk"); - if (IS_ERR(priv->clk)) - return PTR_ERR(priv->clk); - - ret = tw9910_video_probe(client); - if (ret < 0) - v4l2_clk_put(priv->clk); - - return ret; -} - -static int tw9910_remove(struct i2c_client *client) -{ - struct tw9910_priv *priv = to_tw9910(client); - v4l2_clk_put(priv->clk); - return 0; -} - -static const struct i2c_device_id tw9910_id[] = { - { "tw9910", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, tw9910_id); - -static struct i2c_driver tw9910_i2c_driver = { - .driver = { - .name = "tw9910", - }, - .probe = tw9910_probe, - .remove = tw9910_remove, - .id_table = tw9910_id, -}; - -module_i2c_driver(tw9910_i2c_driver); - -MODULE_DESCRIPTION("SoC Camera driver for tw9910"); -MODULE_AUTHOR("Kuninori Morimoto"); -MODULE_LICENSE("GPL v2");