Message ID | 20190312234930.23193-3-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | rcar-csi2: Use standby mode instead of resetting | expand |
Hi Niklas, Thank you for the patch. On Wed, Mar 13, 2019 at 12:49:30AM +0100, Niklas Söderlund wrote: > Later versions of the datasheet updates the reset procedure to more > closely resemble the standby mode. Update the driver to enter and exit > the standby mode instead of resetting the hardware before and after > streaming is started and stopped. This replaces the software reset > (SRST.SRST) control. > > While at it break out the full start and stop procedures from > rcsi2_s_stream() into the existing helper functions. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/platform/rcar-vin/Kconfig | 1 + > drivers/media/platform/rcar-vin/rcar-csi2.c | 69 +++++++++++++-------- > 2 files changed, 43 insertions(+), 27 deletions(-) > > diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig > index e3eb8fee253658da..f26f47e3bcf44825 100644 > --- a/drivers/media/platform/rcar-vin/Kconfig > +++ b/drivers/media/platform/rcar-vin/Kconfig > @@ -3,6 +3,7 @@ config VIDEO_RCAR_CSI2 > tristate "R-Car MIPI CSI-2 Receiver" > depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF > depends on ARCH_RENESAS || COMPILE_TEST > + select RESET_CONTROLLER > select V4L2_FWNODE > help > Support for Renesas R-Car MIPI CSI-2 receiver. > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c > index f64528d2be3c95dd..10f1b4978ed7dcc6 100644 > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c > @@ -14,6 +14,7 @@ > #include <linux/of_graph.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > +#include <linux/reset.h> > #include <linux/sys_soc.h> > > #include <media/v4l2-ctrls.h> > @@ -350,6 +351,7 @@ struct rcar_csi2 { > struct device *dev; > void __iomem *base; > const struct rcar_csi2_info *info; > + struct reset_control *rstc; > > struct v4l2_subdev subdev; > struct media_pad pads[NR_OF_RCAR_CSI2_PAD]; > @@ -387,11 +389,19 @@ static void rcsi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data) > iowrite32(data, priv->base + reg); > } > > -static void rcsi2_reset(struct rcar_csi2 *priv) > +static void rcsi2_enter_standby(struct rcar_csi2 *priv) > { > - rcsi2_write(priv, SRST_REG, SRST_SRST); > + rcsi2_write(priv, PHYCNT_REG, 0); > + rcsi2_write(priv, PHTC_REG, PHTC_TESTCLR); > + reset_control_assert(priv->rstc); > usleep_range(100, 150); > - rcsi2_write(priv, SRST_REG, 0); > + pm_runtime_put(priv->dev); > +} > + > +static void rcsi2_exit_standby(struct rcar_csi2 *priv) > +{ > + pm_runtime_get_sync(priv->dev); > + reset_control_deassert(priv->rstc); > } > > static int rcsi2_wait_phy_start(struct rcar_csi2 *priv) > @@ -462,7 +472,7 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) > return mbps; > } > > -static int rcsi2_start(struct rcar_csi2 *priv) > +static int rcsi2_start_receiver(struct rcar_csi2 *priv) > { > const struct rcar_csi2_format *format; > u32 phycnt, vcdt = 0, vcdt2 = 0; > @@ -506,7 +516,6 @@ static int rcsi2_start(struct rcar_csi2 *priv) > > /* Init */ > rcsi2_write(priv, TREF_REG, TREF_TREF); > - rcsi2_reset(priv); > rcsi2_write(priv, PHTC_REG, 0); > > /* Configure */ > @@ -564,19 +573,36 @@ static int rcsi2_start(struct rcar_csi2 *priv) > return 0; > } > > +static int rcsi2_start(struct rcar_csi2 *priv) > +{ > + int ret; > + > + rcsi2_exit_standby(priv); > + > + ret = rcsi2_start_receiver(priv); > + if (ret) { > + rcsi2_enter_standby(priv); > + return ret; > + } > + > + ret = v4l2_subdev_call(priv->remote, video, s_stream, 1); > + if (ret) { > + rcsi2_enter_standby(priv); > + return ret; > + } > + > + return 0; > +} > + > static void rcsi2_stop(struct rcar_csi2 *priv) > { > - rcsi2_write(priv, PHYCNT_REG, 0); > - > - rcsi2_reset(priv); > - > - rcsi2_write(priv, PHTC_REG, PHTC_TESTCLR); > + rcsi2_enter_standby(priv); > + v4l2_subdev_call(priv->remote, video, s_stream, 0); > } > > static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable) > { > struct rcar_csi2 *priv = sd_to_csi2(sd); > - struct v4l2_subdev *nextsd; > int ret = 0; > > mutex_lock(&priv->lock); > @@ -586,27 +612,12 @@ static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable) > goto out; > } > > - nextsd = priv->remote; > - > if (enable && priv->stream_count == 0) { > - pm_runtime_get_sync(priv->dev); > - > ret = rcsi2_start(priv); > - if (ret) { > - pm_runtime_put(priv->dev); > + if (ret) > goto out; > - } > - > - ret = v4l2_subdev_call(nextsd, video, s_stream, 1); > - if (ret) { > - rcsi2_stop(priv); > - pm_runtime_put(priv->dev); > - goto out; > - } > } else if (!enable && priv->stream_count == 1) { > rcsi2_stop(priv); > - v4l2_subdev_call(nextsd, video, s_stream, 0); > - pm_runtime_put(priv->dev); > } > > priv->stream_count += enable ? 1 : -1; > @@ -936,6 +947,10 @@ static int rcsi2_probe_resources(struct rcar_csi2 *priv, > if (irq < 0) > return irq; > > + priv->rstc = devm_reset_control_get(&pdev->dev, NULL); > + if (IS_ERR(priv->rstc)) > + return PTR_ERR(priv->rstc); > + > return 0; > } >
diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig index e3eb8fee253658da..f26f47e3bcf44825 100644 --- a/drivers/media/platform/rcar-vin/Kconfig +++ b/drivers/media/platform/rcar-vin/Kconfig @@ -3,6 +3,7 @@ config VIDEO_RCAR_CSI2 tristate "R-Car MIPI CSI-2 Receiver" depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF depends on ARCH_RENESAS || COMPILE_TEST + select RESET_CONTROLLER select V4L2_FWNODE help Support for Renesas R-Car MIPI CSI-2 receiver. diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c index f64528d2be3c95dd..10f1b4978ed7dcc6 100644 --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -14,6 +14,7 @@ #include <linux/of_graph.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/sys_soc.h> #include <media/v4l2-ctrls.h> @@ -350,6 +351,7 @@ struct rcar_csi2 { struct device *dev; void __iomem *base; const struct rcar_csi2_info *info; + struct reset_control *rstc; struct v4l2_subdev subdev; struct media_pad pads[NR_OF_RCAR_CSI2_PAD]; @@ -387,11 +389,19 @@ static void rcsi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data) iowrite32(data, priv->base + reg); } -static void rcsi2_reset(struct rcar_csi2 *priv) +static void rcsi2_enter_standby(struct rcar_csi2 *priv) { - rcsi2_write(priv, SRST_REG, SRST_SRST); + rcsi2_write(priv, PHYCNT_REG, 0); + rcsi2_write(priv, PHTC_REG, PHTC_TESTCLR); + reset_control_assert(priv->rstc); usleep_range(100, 150); - rcsi2_write(priv, SRST_REG, 0); + pm_runtime_put(priv->dev); +} + +static void rcsi2_exit_standby(struct rcar_csi2 *priv) +{ + pm_runtime_get_sync(priv->dev); + reset_control_deassert(priv->rstc); } static int rcsi2_wait_phy_start(struct rcar_csi2 *priv) @@ -462,7 +472,7 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) return mbps; } -static int rcsi2_start(struct rcar_csi2 *priv) +static int rcsi2_start_receiver(struct rcar_csi2 *priv) { const struct rcar_csi2_format *format; u32 phycnt, vcdt = 0, vcdt2 = 0; @@ -506,7 +516,6 @@ static int rcsi2_start(struct rcar_csi2 *priv) /* Init */ rcsi2_write(priv, TREF_REG, TREF_TREF); - rcsi2_reset(priv); rcsi2_write(priv, PHTC_REG, 0); /* Configure */ @@ -564,19 +573,36 @@ static int rcsi2_start(struct rcar_csi2 *priv) return 0; } +static int rcsi2_start(struct rcar_csi2 *priv) +{ + int ret; + + rcsi2_exit_standby(priv); + + ret = rcsi2_start_receiver(priv); + if (ret) { + rcsi2_enter_standby(priv); + return ret; + } + + ret = v4l2_subdev_call(priv->remote, video, s_stream, 1); + if (ret) { + rcsi2_enter_standby(priv); + return ret; + } + + return 0; +} + static void rcsi2_stop(struct rcar_csi2 *priv) { - rcsi2_write(priv, PHYCNT_REG, 0); - - rcsi2_reset(priv); - - rcsi2_write(priv, PHTC_REG, PHTC_TESTCLR); + rcsi2_enter_standby(priv); + v4l2_subdev_call(priv->remote, video, s_stream, 0); } static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable) { struct rcar_csi2 *priv = sd_to_csi2(sd); - struct v4l2_subdev *nextsd; int ret = 0; mutex_lock(&priv->lock); @@ -586,27 +612,12 @@ static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable) goto out; } - nextsd = priv->remote; - if (enable && priv->stream_count == 0) { - pm_runtime_get_sync(priv->dev); - ret = rcsi2_start(priv); - if (ret) { - pm_runtime_put(priv->dev); + if (ret) goto out; - } - - ret = v4l2_subdev_call(nextsd, video, s_stream, 1); - if (ret) { - rcsi2_stop(priv); - pm_runtime_put(priv->dev); - goto out; - } } else if (!enable && priv->stream_count == 1) { rcsi2_stop(priv); - v4l2_subdev_call(nextsd, video, s_stream, 0); - pm_runtime_put(priv->dev); } priv->stream_count += enable ? 1 : -1; @@ -936,6 +947,10 @@ static int rcsi2_probe_resources(struct rcar_csi2 *priv, if (irq < 0) return irq; + priv->rstc = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(priv->rstc)) + return PTR_ERR(priv->rstc); + return 0; }
Later versions of the datasheet updates the reset procedure to more closely resemble the standby mode. Update the driver to enter and exit the standby mode instead of resetting the hardware before and after streaming is started and stopped. This replaces the software reset (SRST.SRST) control. While at it break out the full start and stop procedures from rcsi2_s_stream() into the existing helper functions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- drivers/media/platform/rcar-vin/Kconfig | 1 + drivers/media/platform/rcar-vin/rcar-csi2.c | 69 +++++++++++++-------- 2 files changed, 43 insertions(+), 27 deletions(-)