[v3,16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

Message ID	20191007151009.22095-17-bparrot@ti.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=+Pgr=YA=vger.kernel.org=linux-media-owner@kernel.org> From: Benoit Parrot <bparrot@ti.com> To: Hans Verkuil <hverkuil@xs4all.nl> CC: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com> Subject: [Patch v3 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields Date: Mon, 7 Oct 2019 10:10:04 -0500 Message-ID: <20191007151009.22095-17-bparrot@ti.com> In-Reply-To: <20191007151009.22095-1-bparrot@ti.com> References: <20191007151009.22095-1-bparrot@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-media-owner@vger.kernel.org Precedence: bulk
Series	media: vpe: maintenance \| expand [v3,00/21] media: vpe: maintenance [v3,01/21] media: ti-vpe: Fix a parallel build issue [v3,02/21] media: ti-vpe: vpe: Fix Motion Vector vpdma stride [v3,03/21] media: ti-vpe: vpe: Add missing null pointer checks [v3,04/21] media: ti-vpe: vpe: Remove unnecessary use of container_of [v3,05/21] media: ti-vpe: Add support for SEQ_BT [v3,06/21] media: ti-vpe: Add support for NV21 format [v3,07/21] media: ti-vpe: Set MAX height supported to 2048 pixels [v3,08/21] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic [v3,09/21] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format [v3,10/21] media: ti-vpe: vpe: Make sure YUYV is set as default format [v3,11/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage [v3,12/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number [v3,13/21] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases [v3,14/21] media: ti-vpe: vpdma: Use fixed type for address in descriptor [v3,15/21] media: ti-vpe: Set the DMA mask and coherent mask [v3,16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields [v3,17/21] media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func [v3,18/21] media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong [v3,19/21] media: v4l2-common: add pixel encoding support [v3,20/21] media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info [v3,21/21] media: ti-vpe: vpe: don't rely on colorspace member for conversion

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index d7f8eb901475..295cbcef3a0e 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -319,14 +319,9 @@ static struct vpe_fmt vpe_formats[] = { * there is one source queue and one destination queue for each m2m context. */ struct vpe_q_data { - unsigned int width; /* frame width */ - unsigned int height; /* frame height */ - unsigned int nplanes; /* Current number of planes */ - unsigned int bytesperline[VPE_MAX_PLANES]; /* bytes per line in memory */ - enum v4l2_colorspace colorspace; - enum v4l2_field field; /* supported field value */ + /* current v4l2 format info */ + struct v4l2_format format; unsigned int flags; - unsigned int sizeimage[VPE_MAX_PLANES]; /* image size in memory */ struct v4l2_rect c_rect; /* crop/compose rectangle */ struct vpe_fmt *fmt; /* format info */ }; @@ -761,11 +756,12 @@ static void set_src_registers(struct vpe_ctx *ctx) static void set_dst_registers(struct vpe_ctx *ctx) { struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr; - enum v4l2_colorspace clrspc = ctx->q_data[Q_DATA_DST].colorspace; + struct v4l2_pix_format_mplane *pix; struct vpe_fmt *fmt = ctx->q_data[Q_DATA_DST].fmt; u32 val = 0; - if (clrspc == V4L2_COLORSPACE_SRGB) { + pix = &ctx->q_data[Q_DATA_DST].format.fmt.pix_mp; + if (pix->colorspace == V4L2_COLORSPACE_SRGB) { val |= VPE_RGB_OUT_SELECT; vpdma_set_bg_color(ctx->dev->vpdma, (struct vpdma_data_format *)fmt->vpdma_fmt[0], 0xff); @@ -868,11 +864,15 @@ static int set_srcdst_params(struct vpe_ctx *ctx) unsigned int src_h = s_q_data->c_rect.height; unsigned int dst_w = d_q_data->c_rect.width; unsigned int dst_h = d_q_data->c_rect.height; + struct v4l2_pix_format_mplane *spix; + struct v4l2_pix_format_mplane *dpix; size_t mv_buf_size; int ret; ctx->sequence = 0; ctx->field = V4L2_FIELD_TOP; + spix = &s_q_data->format.fmt.pix_mp; + dpix = &d_q_data->format.fmt.pix_mp; if ((s_q_data->flags & Q_IS_INTERLACED) && !(d_q_data->flags & Q_IS_INTERLACED)) { @@ -887,9 +887,9 @@ static int set_srcdst_params(struct vpe_ctx *ctx) * extra space will not be used by the de-interlacer, but will * ensure that vpdma operates correctly */ - bytes_per_line = ALIGN((s_q_data->width * mv->depth) >> 3, - VPDMA_STRIDE_ALIGN); - mv_buf_size = bytes_per_line * s_q_data->height; + bytes_per_line = ALIGN((spix->width * mv->depth) >> 3, + VPDMA_STRIDE_ALIGN); + mv_buf_size = bytes_per_line * spix->height; ctx->deinterlacing = true; src_h <<= 1; @@ -909,7 +909,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) set_dei_regs(ctx); csc_set_coeff(ctx->dev->csc, &mmr_adb->csc_regs[0], - s_q_data->colorspace, d_q_data->colorspace); + spix->colorspace, dpix->colorspace); sc_set_hs_coeffs(ctx->dev->sc, ctx->sc_coeff_h.addr, src_w, dst_w); sc_set_vs_coeffs(ctx->dev->sc, ctx->sc_coeff_v.addr, src_h, dst_h); @@ -1023,6 +1023,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) struct vpe_fmt *fmt = q_data->fmt; const struct vpdma_data_format *vpdma_fmt; int mv_buf_selector = !ctx->src_mv_buf_selector; + struct v4l2_pix_format_mplane *pix; dma_addr_t dma_addr; u32 flags = 0; u32 offset = 0; @@ -1032,21 +1033,23 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV]; dma_addr = ctx->mv_buf_dma[mv_buf_selector]; q_data = &ctx->q_data[Q_DATA_SRC]; - stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3, + pix = &q_data->format.fmt.pix_mp; + stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3, VPDMA_STRIDE_ALIGN); } else { /* to incorporate interleaved formats */ int plane = fmt->coplanar ? p_data->vb_part : 0; + pix = &q_data->format.fmt.pix_mp; vpdma_fmt = fmt->vpdma_fmt[plane]; /* * If we are using a single plane buffer and * we need to set a separate vpdma chroma channel. */ - if (q_data->nplanes == 1 && plane) { + if (pix->num_planes == 1 && plane) { dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0); /* Compute required offset */ - offset = q_data->bytesperline[0] * q_data->height; + offset = pix->plane_fmt[0].bytesperline * pix->height; } else { dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane); /* Use address as is, no offset */ @@ -1060,7 +1063,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) } /* Apply the offset */ dma_addr += offset; - stride = q_data->bytesperline[VPE_LUMA]; + stride = pix->plane_fmt[VPE_LUMA].bytesperline; } if (q_data->flags & Q_DATA_FRAME_1D) @@ -1071,7 +1074,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1, MAX_W, MAX_H); - vpdma_add_out_dtd(&ctx->desc_list, q_data->width, + vpdma_add_out_dtd(&ctx->desc_list, pix->width, stride, &q_data->c_rect, vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1, MAX_OUT_HEIGHT_REG1, p_data->channel, flags); @@ -1084,6 +1087,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) struct vb2_buffer *vb = &ctx->src_vbs[p_data->vb_index]->vb2_buf; struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); struct vpe_fmt *fmt = q_data->fmt; + struct v4l2_pix_format_mplane *pix; const struct vpdma_data_format *vpdma_fmt; int mv_buf_selector = ctx->src_mv_buf_selector; int field = vbuf->field == V4L2_FIELD_BOTTOM; @@ -1093,10 +1097,11 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) u32 offset = 0; u32 stride; + pix = &q_data->format.fmt.pix_mp; if (port == VPE_PORT_MV_IN) { vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV]; dma_addr = ctx->mv_buf_dma[mv_buf_selector]; - stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3, + stride = ALIGN((pix->width * vpdma_fmt->depth) >> 3, VPDMA_STRIDE_ALIGN); } else { /* to incorporate interleaved formats */ @@ -1107,10 +1112,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) * If we are using a single plane buffer and * we need to set a separate vpdma chroma channel. */ - if (q_data->nplanes == 1 && plane) { + if (pix->num_planes == 1 && plane) { dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0); /* Compute required offset */ - offset = q_data->bytesperline[0] * q_data->height; + offset = pix->plane_fmt[0].bytesperline * pix->height; } else { dma_addr = vb2_dma_contig_plane_dma_addr(vb, plane); /* Use address as is, no offset */ @@ -1124,7 +1129,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) } /* Apply the offset */ dma_addr += offset; - stride = q_data->bytesperline[VPE_LUMA]; + stride = pix->plane_fmt[VPE_LUMA].bytesperline; /* * field used in VPDMA desc = 0 (top) / 1 (bottom) @@ -1144,7 +1149,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) field = (field + p_data->vb_index + ctx->sequence) % 2; if (field) { - int height = q_data->height / 2; + int height = pix->height / 2; int bpp; if (fmt->fourcc == V4L2_PIX_FMT_NV12 || @@ -1156,7 +1161,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) if (plane) height /= 2; - dma_addr += q_data->width * height * bpp; + dma_addr += pix->width * height * bpp; } } } @@ -1173,7 +1178,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) fmt->fourcc == V4L2_PIX_FMT_NV21)) frame_height /= 2; - vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride, + vpdma_add_in_dtd(&ctx->desc_list, pix->width, stride, &q_data->c_rect, vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width, frame_height, 0, 0); @@ -1210,6 +1215,9 @@ static void device_run(void *priv) struct sc_data *sc = ctx->dev->sc; struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST]; struct vpe_q_data *s_q_data = &ctx->q_data[Q_DATA_SRC]; + struct v4l2_pix_format_mplane *dpix; + + dpix = &d_q_data->format.fmt.pix_mp; if (ctx->deinterlacing && s_q_data->flags & Q_IS_SEQ_XX && ctx->sequence % 2 == 0) { @@ -1282,7 +1290,7 @@ static void device_run(void *priv) if (ctx->deinterlacing) add_out_dtd(ctx, VPE_PORT_MV_OUT); - if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) { + if (dpix->colorspace == V4L2_COLORSPACE_SRGB) { add_out_dtd(ctx, VPE_PORT_RGB_OUT); } else { add_out_dtd(ctx, VPE_PORT_LUMA_OUT); @@ -1324,7 +1332,7 @@ static void device_run(void *priv) } /* sync on channel control descriptors for output ports */ - if (d_q_data->colorspace == V4L2_COLORSPACE_SRGB) { + if (dpix->colorspace == V4L2_COLORSPACE_SRGB) { vpdma_add_sync_on_channel_ctd(&ctx->desc_list, VPE_CHAN_RGB_OUT); } else { @@ -1559,7 +1567,6 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f) struct vpe_ctx *ctx = file->private_data; struct vb2_queue *vq; struct vpe_q_data *q_data; - int i; vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); if (!vq) @@ -1569,27 +1576,17 @@ static int vpe_g_fmt(struct file *file, void *priv, struct v4l2_format *f) if (!q_data) return -EINVAL; - pix->width = q_data->width; - pix->height = q_data->height; - pix->pixelformat = q_data->fmt->fourcc; - pix->field = q_data->field; + *f = q_data->format; - if (V4L2_TYPE_IS_OUTPUT(f->type)) { - pix->colorspace = q_data->colorspace; - } else { + if (!V4L2_TYPE_IS_OUTPUT(f->type)) { struct vpe_q_data *s_q_data; + struct v4l2_pix_format_mplane *spix; /* get colorspace from the source queue */ s_q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + spix = &s_q_data->format.fmt.pix_mp; - pix->colorspace = s_q_data->colorspace; - } - - pix->num_planes = q_data->nplanes; - - for (i = 0; i < pix->num_planes; i++) { - pix->plane_fmt[i].bytesperline = q_data->bytesperline[i]; - pix->plane_fmt[i].sizeimage = q_data->sizeimage[i]; + pix->colorspace = spix->colorspace; } return 0; @@ -1736,10 +1733,9 @@ static int vpe_try_fmt(struct file *file, void *priv, struct v4l2_format *f) static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f) { struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; - struct v4l2_plane_pix_format *plane_fmt; + struct v4l2_pix_format_mplane *qpix; struct vpe_q_data *q_data; struct vb2_queue *vq; - int i; vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); if (!vq) @@ -1754,30 +1750,20 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f) if (!q_data) return -EINVAL; + qpix = &q_data->format.fmt.pix_mp; q_data->fmt = find_format(f); - q_data->width = pix->width; - q_data->height = pix->height; - q_data->colorspace = pix->colorspace; - q_data->field = pix->field; - q_data->nplanes = pix->num_planes; - - for (i = 0; i < pix->num_planes; i++) { - plane_fmt = &pix->plane_fmt[i]; - - q_data->bytesperline[i] = plane_fmt->bytesperline; - q_data->sizeimage[i] = plane_fmt->sizeimage; - } + q_data->format = *f; q_data->c_rect.left = 0; q_data->c_rect.top = 0; - q_data->c_rect.width = q_data->width; - q_data->c_rect.height = q_data->height; + q_data->c_rect.width = pix->width; + q_data->c_rect.height = pix->height; - if (q_data->field == V4L2_FIELD_ALTERNATE) + if (qpix->field == V4L2_FIELD_ALTERNATE) q_data->flags |= Q_DATA_INTERLACED_ALTERNATE; - else if (q_data->field == V4L2_FIELD_SEQ_TB) + else if (qpix->field == V4L2_FIELD_SEQ_TB) q_data->flags |= Q_DATA_INTERLACED_SEQ_TB; - else if (q_data->field == V4L2_FIELD_SEQ_BT) + else if (qpix->field == V4L2_FIELD_SEQ_BT) q_data->flags |= Q_DATA_INTERLACED_SEQ_BT; else q_data->flags &= ~Q_IS_INTERLACED; @@ -1787,11 +1773,11 @@ static int __vpe_s_fmt(struct vpe_ctx *ctx, struct v4l2_format *f) q_data->c_rect.height /= 2; vpe_dbg(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d bpl_y %d", - f->type, q_data->width, q_data->height, q_data->fmt->fourcc, - q_data->bytesperline[VPE_LUMA]); - if (q_data->nplanes == 2) + f->type, pix->width, pix->height, pix->pixelformat, + pix->plane_fmt[0].bytesperline); + if (pix->num_planes == 2) vpe_dbg(ctx->dev, " bpl_uv %d\n", - q_data->bytesperline[VPE_CHROMA]); + pix->plane_fmt[1].bytesperline); return 0; } @@ -1820,6 +1806,7 @@ static int vpe_s_fmt(struct file *file, void *priv, struct v4l2_format *f) static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s) { struct vpe_q_data *q_data; + struct v4l2_pix_format_mplane *pix; int height; if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && @@ -1830,6 +1817,8 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s) if (!q_data) return -EINVAL; + pix = &q_data->format.fmt.pix_mp; + switch (s->target) { case V4L2_SEL_TGT_COMPOSE: /* @@ -1860,23 +1849,23 @@ static int __vpe_try_selection(struct vpe_ctx *ctx, struct v4l2_selection *s) * the field height, not the buffer height */ if (q_data->flags & Q_IS_SEQ_XX) - height = q_data->height / 2; + height = pix->height / 2; else - height = q_data->height; + height = pix->height; if (s->r.top < 0 || s->r.left < 0) { vpe_err(ctx->dev, "negative values for top and left\n"); s->r.top = s->r.left = 0; } - v4l_bound_align_image(&s->r.width, MIN_W, q_data->width, 1, + v4l_bound_align_image(&s->r.width, MIN_W, pix->width, 1, &s->r.height, MIN_H, height, H_ALIGN, S_ALIGN); /* adjust left/top if cropping rectangle is out of bounds */ - if (s->r.left + s->r.width > q_data->width) - s->r.left = q_data->width - s->r.width; - if (s->r.top + s->r.height > q_data->height) - s->r.top = q_data->height - s->r.height; + if (s->r.left + s->r.width > pix->width) + s->r.left = pix->width - s->r.width; + if (s->r.top + s->r.height > pix->height) + s->r.top = pix->height - s->r.height; return 0; } @@ -1886,6 +1875,7 @@ static int vpe_g_selection(struct file *file, void *fh, { struct vpe_ctx *ctx = file->private_data; struct vpe_q_data *q_data; + struct v4l2_pix_format_mplane *pix; bool use_c_rect = false; if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && @@ -1896,6 +1886,8 @@ static int vpe_g_selection(struct file *file, void *fh, if (!q_data) return -EINVAL; + pix = &q_data->format.fmt.pix_mp; + switch (s->target) { case V4L2_SEL_TGT_COMPOSE_DEFAULT: case V4L2_SEL_TGT_COMPOSE_BOUNDS: @@ -1934,8 +1926,8 @@ static int vpe_g_selection(struct file *file, void *fh, */ s->r.left = 0; s->r.top = 0; - s->r.width = q_data->width; - s->r.height = q_data->height; + s->r.width = pix->width; + s->r.height = pix->height; } return 0; @@ -2038,19 +2030,21 @@ static int vpe_queue_setup(struct vb2_queue *vq, int i; struct vpe_ctx *ctx = vb2_get_drv_priv(vq); struct vpe_q_data *q_data; + struct v4l2_pix_format_mplane *pix; q_data = get_q_data(ctx, vq->type); if (!q_data) return -EINVAL; - *nplanes = q_data->nplanes; + pix = &q_data->format.fmt.pix_mp; + *nplanes = pix->num_planes; for (i = 0; i < *nplanes; i++) - sizes[i] = q_data->sizeimage[i]; + sizes[i] = pix->plane_fmt[i].sizeimage; vpe_dbg(ctx->dev, "get %d buffer(s) of size %d", *nbuffers, sizes[VPE_LUMA]); - if (q_data->nplanes == 2) + if (*nplanes == 2) vpe_dbg(ctx->dev, " and %d\n", sizes[VPE_CHROMA]); return 0; @@ -2061,14 +2055,16 @@ static int vpe_buf_prepare(struct vb2_buffer *vb) struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); struct vpe_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); struct vpe_q_data *q_data; - int i, num_planes; + struct v4l2_pix_format_mplane *pix; + int i; vpe_dbg(ctx->dev, "type: %d\n", vb->vb2_queue->type); q_data = get_q_data(ctx, vb->vb2_queue->type); if (!q_data) return -EINVAL; - num_planes = q_data->nplanes; + + pix = &q_data->format.fmt.pix_mp; if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { if (!(q_data->flags & Q_IS_INTERLACED)) { @@ -2082,18 +2078,18 @@ static int vpe_buf_prepare(struct vb2_buffer *vb) } } - for (i = 0; i < num_planes; i++) { - if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) { + for (i = 0; i < pix->num_planes; i++) { + if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) { vpe_err(ctx->dev, "data will not fit into plane (%lu < %lu)\n", vb2_plane_size(vb, i), - (long) q_data->sizeimage[i]); + (long) pix->plane_fmt[i].sizeimage); return -EINVAL; } } - for (i = 0; i < num_planes; i++) - vb2_set_plane_payload(vb, i, q_data->sizeimage[i]); + for (i = 0; i < pix->num_planes; i++) + vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage); return 0; } @@ -2278,6 +2274,7 @@ static int vpe_open(struct file *file) struct vpe_q_data *s_q_data; struct v4l2_ctrl_handler *hdl; struct vpe_ctx *ctx; + struct v4l2_pix_format_mplane *pix; int ret; vpe_dbg(dev, "vpe_open\n"); @@ -2326,23 +2323,32 @@ static int vpe_open(struct file *file) v4l2_ctrl_handler_setup(hdl); s_q_data = &ctx->q_data[Q_DATA_SRC]; + pix = &s_q_data->format.fmt.pix_mp; s_q_data->fmt = __find_format(V4L2_PIX_FMT_YUYV); - s_q_data->width = 1920; - s_q_data->height = 1080; - s_q_data->nplanes = 1; - s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width * + pix->pixelformat = s_q_data->fmt->fourcc; + s_q_data->format.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + pix->width = 1920; + pix->height = 1080; + pix->num_planes = 1; + pix->plane_fmt[VPE_LUMA].bytesperline = (pix->width * s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3; - s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] * - s_q_data->height); - s_q_data->colorspace = V4L2_COLORSPACE_REC709; - s_q_data->field = V4L2_FIELD_NONE; + pix->plane_fmt[VPE_LUMA].sizeimage = + pix->plane_fmt[VPE_LUMA].bytesperline * + pix->height; + pix->colorspace = V4L2_COLORSPACE_REC709; + pix->xfer_func = V4L2_XFER_FUNC_DEFAULT; + pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + pix->quantization = V4L2_QUANTIZATION_DEFAULT; + pix->field = V4L2_FIELD_NONE; s_q_data->c_rect.left = 0; s_q_data->c_rect.top = 0; - s_q_data->c_rect.width = s_q_data->width; - s_q_data->c_rect.height = s_q_data->height; + s_q_data->c_rect.width = pix->width; + s_q_data->c_rect.height = pix->height; s_q_data->flags = 0; ctx->q_data[Q_DATA_DST] = *s_q_data; + ctx->q_data[Q_DATA_DST].format.type = + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; set_dei_shadow_registers(ctx); set_src_registers(ctx);

[v3,16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields

Commit Message

Patch