@@ -30,7 +30,6 @@
#include <linux/spinlock.h>
#include <linux/soundcard.h>
#include <linux/slab.h>
-#include <linux/vmalloc.h>
#include <linux/module.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -192,28 +191,6 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
return 0;
}
-static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
- size_t size)
-{
- struct em28xx *dev = snd_pcm_substream_chip(subs);
- struct snd_pcm_runtime *runtime = subs->runtime;
-
- dprintk("Allocating vbuffer\n");
- if (runtime->dma_area) {
- if (runtime->dma_bytes > size)
- return 0;
-
- vfree(runtime->dma_area);
- }
- runtime->dma_area = vmalloc(size);
- if (!runtime->dma_area)
- return -ENOMEM;
-
- runtime->dma_bytes = size;
-
- return 0;
-}
-
static const struct snd_pcm_hardware snd_em28xx_hw_capture = {
.info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
@@ -341,63 +318,12 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream)
}
em28xx_audio_analog_set(dev);
- if (substream->runtime->dma_area) {
- dprintk("freeing\n");
- vfree(substream->runtime->dma_area);
- substream->runtime->dma_area = NULL;
- }
mutex_unlock(&dev->lock);
kref_put(&dev->ref, em28xx_free_device);
return 0;
}
-static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- int ret;
- struct em28xx *dev = snd_pcm_substream_chip(substream);
-
- if (dev->disconnected)
- return -ENODEV;
-
- dprintk("Setting capture parameters\n");
-
- ret = snd_pcm_alloc_vmalloc_buffer(substream,
- params_buffer_bytes(hw_params));
- if (ret < 0)
- return ret;
-#if 0
- /*
- * TODO: set up em28xx audio chip to deliver the correct audio format,
- * current default is 48000hz multiplexed => 96000hz mono
- * which shouldn't matter since analogue TV only supports mono
- */
- unsigned int channels, rate, format;
-
- format = params_format(hw_params);
- rate = params_rate(hw_params);
- channels = params_channels(hw_params);
-#endif
-
- return 0;
-}
-
-static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream)
-{
- struct em28xx *dev = snd_pcm_substream_chip(substream);
- struct em28xx_audio *adev = &dev->adev;
-
- dprintk("Stop capture, if needed\n");
-
- if (atomic_read(&adev->stream_started) > 0) {
- atomic_set(&adev->stream_started, 0);
- schedule_work(&adev->wq_trigger);
- }
-
- return 0;
-}
-
static int snd_em28xx_prepare(struct snd_pcm_substream *substream)
{
struct em28xx *dev = snd_pcm_substream_chip(substream);
@@ -471,14 +397,6 @@ static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
return hwptr_done;
}
-static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
- unsigned long offset)
-{
- void *pageptr = subs->runtime->dma_area + offset;
-
- return vmalloc_to_page(pageptr);
-}
-
/*
* AC97 volume control support
*/
@@ -709,12 +627,9 @@ static const struct snd_pcm_ops snd_em28xx_pcm_capture = {
.open = snd_em28xx_capture_open,
.close = snd_em28xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_em28xx_hw_capture_params,
- .hw_free = snd_em28xx_hw_capture_free,
.prepare = snd_em28xx_prepare,
.trigger = snd_em28xx_capture_trigger,
.pointer = snd_em28xx_capture_pointer,
- .page = snd_pcm_get_vmalloc_page,
};
static void em28xx_audio_free_urb(struct em28xx *dev)
@@ -936,6 +851,7 @@ static int em28xx_audio_init(struct em28xx *dev)
goto card_free;
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_em28xx_pcm_capture);
+ snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, NULL, 0, 0);
pcm->info_flags = 0;
pcm->private_data = dev;
strscpy(pcm->name, "Empia 28xx Capture", sizeof(pcm->name));
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Also, snd_em28xx_hw_capture_free() is dropped since the check of stream_started flag makes no sense; hw_free callback is guaranteed to be called after the stream gets stopped. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- drivers/media/usb/em28xx/em28xx-audio.c | 86 +-------------------------------- 1 file changed, 1 insertion(+), 85 deletions(-)