@@ -37,10 +37,13 @@
#define INT_CLR_RCV BIT(16)
#define INT_CLR_RCVTIMEOUT (BIT(16) | BIT(17))
-#define IR_CLK 0x48
#define IR_CLK_ENABLE BIT(4)
#define IR_CLK_RESET BIT(5)
+/* IR_ENABLE register bits */
+#define IR_ENABLE_EN BIT(0)
+#define IR_ENABLE_EN_EXTRA BIT(8)
+
#define IR_CFG_WIDTH_MASK 0xffff
#define IR_CFG_WIDTH_SHIFT 16
#define IR_CFG_FORMAT_MASK 0x3
@@ -58,6 +61,23 @@
#define IR_HIX5HD2_NAME "hix5hd2-ir"
+/* Need to set extra bit for enabling IR */
+#define HIX5HD2_FLAG_EXTRA_ENABLE BIT(0)
+
+struct hix5hd2_soc_data {
+ u32 clk_reg;
+ u32 flags;
+};
+
+static const struct hix5hd2_soc_data hix5hd2_data = {
+ .clk_reg = 0x48,
+};
+
+static const struct hix5hd2_soc_data hi3796cv300_data = {
+ .clk_reg = 0x60,
+ .flags = HIX5HD2_FLAG_EXTRA_ENABLE,
+};
+
struct hix5hd2_ir_priv {
int irq;
void __iomem *base;
@@ -66,15 +86,17 @@ struct hix5hd2_ir_priv {
struct regmap *regmap;
struct clk *clock;
unsigned long rate;
+ const struct hix5hd2_soc_data *socdata;
};
-static int hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on)
+static int hix5hd2_ir_clk_enable(struct hix5hd2_ir_priv *dev, bool on)
{
+ u32 clk_reg = dev->socdata->clk_reg;
u32 val;
int ret = 0;
if (dev->regmap) {
- regmap_read(dev->regmap, IR_CLK, &val);
+ regmap_read(dev->regmap, clk_reg, &val);
if (on) {
val &= ~IR_CLK_RESET;
val |= IR_CLK_ENABLE;
@@ -82,7 +104,7 @@ static int hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on)
val &= ~IR_CLK_ENABLE;
val |= IR_CLK_RESET;
}
- regmap_write(dev->regmap, IR_CLK, val);
+ regmap_write(dev->regmap, clk_reg, val);
} else {
if (on)
ret = clk_prepare_enable(dev->clock);
@@ -92,12 +114,23 @@ static int hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on)
return ret;
}
+static inline void hix5hd2_ir_enable(struct hix5hd2_ir_priv *priv)
+{
+ u32 val = IR_ENABLE_EN;
+
+ if (priv->socdata->flags & HIX5HD2_FLAG_EXTRA_ENABLE)
+ val |= IR_ENABLE_EN_EXTRA;
+
+ writel_relaxed(val, priv->base + IR_ENABLE);
+}
+
static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv)
{
int timeout = 10000;
u32 val, rate;
- writel_relaxed(0x01, priv->base + IR_ENABLE);
+ hix5hd2_ir_enable(priv);
+
while (readl_relaxed(priv->base + IR_BUSY)) {
if (timeout--) {
udelay(1);
@@ -128,13 +161,13 @@ static int hix5hd2_ir_open(struct rc_dev *rdev)
struct hix5hd2_ir_priv *priv = rdev->priv;
int ret;
- ret = hix5hd2_ir_enable(priv, true);
+ ret = hix5hd2_ir_clk_enable(priv, true);
if (ret)
return ret;
ret = hix5hd2_ir_config(priv);
if (ret) {
- hix5hd2_ir_enable(priv, false);
+ hix5hd2_ir_clk_enable(priv, false);
return ret;
}
return 0;
@@ -144,7 +177,7 @@ static void hix5hd2_ir_close(struct rc_dev *rdev)
{
struct hix5hd2_ir_priv *priv = rdev->priv;
- hix5hd2_ir_enable(priv, false);
+ hix5hd2_ir_clk_enable(priv, false);
}
static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
@@ -205,6 +238,13 @@ static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data)
return IRQ_HANDLED;
}
+static const struct of_device_id hix5hd2_ir_table[] = {
+ { .compatible = "hisilicon,hix5hd2-ir", &hix5hd2_data, },
+ { .compatible = "hisilicon,hi3796cv300-ir", &hi3796cv300_data, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
+
static int hix5hd2_ir_probe(struct platform_device *pdev)
{
struct rc_dev *rdev;
@@ -212,6 +252,7 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
struct resource *res;
struct hix5hd2_ir_priv *priv;
struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *of_id;
const char *map_name;
int ret;
@@ -219,6 +260,13 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ of_id = of_match_device(hix5hd2_ir_table, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to initialize IR data\n");
+ return -ENODEV;
+ }
+ priv->socdata = of_id->data;
+
priv->regmap = syscon_regmap_lookup_by_phandle(node,
"hisilicon,power-syscon");
if (IS_ERR(priv->regmap)) {
@@ -309,7 +357,7 @@ static int hix5hd2_ir_suspend(struct device *dev)
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
clk_disable_unprepare(priv->clock);
- hix5hd2_ir_enable(priv, false);
+ hix5hd2_ir_clk_enable(priv, false);
return 0;
}
@@ -319,17 +367,18 @@ static int hix5hd2_ir_resume(struct device *dev)
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
int ret;
- ret = hix5hd2_ir_enable(priv, true);
+ ret = hix5hd2_ir_clk_enable(priv, true);
if (ret)
return ret;
ret = clk_prepare_enable(priv->clock);
if (ret) {
- hix5hd2_ir_enable(priv, false);
+ hix5hd2_ir_clk_enable(priv, false);
return ret;
}
- writel_relaxed(0x01, priv->base + IR_ENABLE);
+ hix5hd2_ir_enable(priv);
+
writel_relaxed(0x00, priv->base + IR_INTM);
writel_relaxed(0xff, priv->base + IR_INTC);
writel_relaxed(0x01, priv->base + IR_START);
@@ -341,12 +390,6 @@ static int hix5hd2_ir_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend,
hix5hd2_ir_resume);
-static const struct of_device_id hix5hd2_ir_table[] = {
- { .compatible = "hisilicon,hix5hd2-ir", },
- {},
-};
-MODULE_DEVICE_TABLE(of, hix5hd2_ir_table);
-
static struct platform_driver hix5hd2_ir_driver = {
.driver = {
.name = IR_HIX5HD2_NAME,
The IR device on Hi3796CV300 SoC is mostly same as hix5hd2, except the following two things. - IR_CLK offset is 0x60 instead of 0x48. - It needs to set an extra bit in IR_ENABLE register to enable IR. The following changes are made to deal with them. - Define a SoC specific data to accommodate IR_CLK offset and the flag telling requirement of extra enable bit. - Create function hix5hd2_ir_enable() to handle IR enabling. The original hix5hd2_ir_enable() is all about managing IR clock, so gets renamed to hix5hd2_ir_clk_enable(). - Device table hix5hd2_ir_table[] gets moved forward, as it's being used by hix5hd2_ir_probe() now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/media/rc/ir-hix5hd2.c | 79 +++++++++++++++++++++++++++-------- 1 file changed, 61 insertions(+), 18 deletions(-)