@@ -1,19 +1,27 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_HANTRO
tristate "Hantro VPU driver"
- depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on ARCH_MXC || ARCH_ROCKCHIP || COMPILE_TEST
depends on VIDEO_DEV && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CONTROLLER_REQUEST_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
help
- Support for the Hantro IP based Video Processing Unit present on
- Rockchip SoC, which accelerates video and image encoding and
- decoding.
+ Support for the Hantro IP based Video Processing Units present on
+ Rockchip and NXP i.MX8M SoCs, which accelerate video and image
+ encoding and decoding.
To compile this driver as a module, choose M here: the module
will be called hantro-vpu.
+config VIDEO_HANTRO_IMX8M
+ bool "Hantro VPU i.MX8M support"
+ depends on VIDEO_HANTRO
+ depends on ARCH_MXC || COMPILE_TEST
+ default y
+ help
+ Enable support for i.MX8M SoCs.
+
config VIDEO_HANTRO_ROCKCHIP
bool "Hantro VPU Rockchip support"
depends on VIDEO_HANTRO
@@ -16,6 +16,9 @@ hantro-vpu-y += \
hantro_mpeg2.o \
hantro_vp8.o
+hantro-vpu-$(CONFIG_VIDEO_HANTRO_IMX8M) += \
+ imx8m_vpu_hw.o
+
hantro-vpu-$(CONFIG_VIDEO_HANTRO_ROCKCHIP) += \
rk3288_vpu_hw.o \
rk3399_vpu_hw.o
@@ -479,6 +479,9 @@ static const struct of_device_id of_hantro_match[] = {
{ .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
{ .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
{ .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
+#endif
+#ifdef CONFIG_VIDEO_HANTRO_IMX8M
+ { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
#endif
{ /* sentinel */ }
};
@@ -155,6 +155,7 @@ enum hantro_enc_fmt {
extern const struct hantro_variant rk3399_vpu_variant;
extern const struct hantro_variant rk3328_vpu_variant;
extern const struct hantro_variant rk3288_vpu_variant;
+extern const struct hantro_variant imx8mq_vpu_variant;
extern const struct hantro_postproc_regs hantro_g1_postproc_regs;
new file mode 100644
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hantro VPU codec driver
+ *
+ * Copyright (C) 2019 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include "hantro.h"
+#include "hantro_jpeg.h"
+#include "hantro_g1_regs.h"
+
+#define CTRL_SOFT_RESET 0x00
+#define RESET_G1 BIT(1)
+#define RESET_G2 BIT(0)
+
+#define CTRL_CLOCK_ENABLE 0x04
+#define CLOCK_G1 BIT(1)
+#define CLOCK_G2 BIT(0)
+
+#define CTRL_G1_DEC_FUSE 0x08
+#define CTRL_G1_PP_FUSE 0x0c
+#define CTRL_G2_DEC_FUSE 0x10
+
+static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
+{
+ u32 val;
+
+ /* Assert */
+ val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
+ val &= ~reset_bits;
+ writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
+
+ udelay(2);
+
+ /* Release */
+ val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
+ val |= reset_bits;
+ writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
+}
+
+static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
+{
+ u32 val;
+
+ val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
+ val |= clock_bits;
+ writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
+}
+
+static int imx8mq_runtime_resume(struct hantro_dev *vpu)
+{
+ int ret;
+
+ ret = clk_bulk_prepare_enable(vpu->variant->num_clocks, vpu->clocks);
+ if (ret) {
+ dev_err(vpu->dev, "Failed to enable clocks\n");
+ return ret;
+ }
+
+ imx8m_soft_reset(vpu, RESET_G1 | RESET_G2);
+ imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
+
+ /* Set values of the fuse registers */
+ writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
+ writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
+ writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
+
+ clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
+
+ return 0;
+}
+
+/*
+ * Supported formats.
+ */
+
+static const struct hantro_fmt imx8m_vpu_postproc_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .codec_mode = HANTRO_MODE_NONE,
+ },
+};
+
+static const struct hantro_fmt imx8m_vpu_dec_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .codec_mode = HANTRO_MODE_NONE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_MPEG2_SLICE,
+ .codec_mode = HANTRO_MODE_MPEG2_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_VP8_FRAME,
+ .codec_mode = HANTRO_MODE_VP8_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 3840,
+ .step_width = 16,
+ .min_height = 48,
+ .max_height = 2160,
+ .step_height = 16,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_H264_SLICE,
+ .codec_mode = HANTRO_MODE_H264_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 3840,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 2160,
+ .step_height = MB_DIM,
+ },
+ },
+};
+
+static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
+{
+ struct hantro_dev *vpu = dev_id;
+ enum vb2_buffer_state state;
+ u32 status;
+
+ status = vdpu_read(vpu, G1_REG_INTERRUPT);
+ state = (status & G1_REG_INTERRUPT_DEC_RDY_INT) ?
+ VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
+
+ vdpu_write(vpu, 0, G1_REG_INTERRUPT);
+ vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
+
+ hantro_irq_done(vpu, 0, state);
+
+ return IRQ_HANDLED;
+}
+
+static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
+{
+ vpu->dec_base = vpu->reg_bases[0];
+ vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
+
+ return 0;
+}
+
+static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+
+ imx8m_soft_reset(vpu, RESET_G1);
+}
+
+/*
+ * Supported codec ops.
+ */
+
+static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
+ [HANTRO_MODE_MPEG2_DEC] = {
+ .run = hantro_g1_mpeg2_dec_run,
+ .reset = imx8m_vpu_g1_reset,
+ .init = hantro_mpeg2_dec_init,
+ .exit = hantro_mpeg2_dec_exit,
+ },
+ [HANTRO_MODE_VP8_DEC] = {
+ .run = hantro_g1_vp8_dec_run,
+ .reset = imx8m_vpu_g1_reset,
+ .init = hantro_vp8_dec_init,
+ .exit = hantro_vp8_dec_exit,
+ },
+ [HANTRO_MODE_H264_DEC] = {
+ .run = hantro_g1_h264_dec_run,
+ .reset = imx8m_vpu_g1_reset,
+ .init = hantro_h264_dec_init,
+ .exit = hantro_h264_dec_exit,
+ },
+};
+
+/*
+ * VPU variants.
+ */
+
+static const struct hantro_irq imx8mq_irqs[] = {
+ { "g1", imx8m_vpu_g1_irq },
+ { "g2", NULL /* TODO: imx8m_vpu_g2_irq */ },
+};
+
+static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
+static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
+
+const struct hantro_variant imx8mq_vpu_variant = {
+ .dec_fmts = imx8m_vpu_dec_fmts,
+ .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
+ .postproc_fmts = imx8m_vpu_postproc_fmts,
+ .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
+ .postproc_regs = &hantro_g1_postproc_regs,
+ .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
+ HANTRO_H264_DECODER,
+ .codec_ops = imx8mq_vpu_codec_ops,
+ .init = imx8mq_vpu_hw_init,
+ .runtime_resume = imx8mq_runtime_resume,
+ .irqs = imx8mq_irqs,
+ .num_irqs = ARRAY_SIZE(imx8mq_irqs),
+ .clk_names = imx8mq_clk_names,
+ .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
+ .reg_names = imx8mq_reg_names,
+ .num_regs = ARRAY_SIZE(imx8mq_reg_names)
+};
This enables h.264, MPEG-2, and VP8 decoding on the Hantro G1 on i.MX8MQ, with post-processing support. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- Changes since v5: - Rebase onto media/master - Enable h.264 and VP8 decoding - Enable post-processing --- drivers/staging/media/hantro/Kconfig | 16 +- drivers/staging/media/hantro/Makefile | 3 + drivers/staging/media/hantro/hantro_drv.c | 3 + drivers/staging/media/hantro/hantro_hw.h | 1 + drivers/staging/media/hantro/imx8m_vpu_hw.c | 220 ++++++++++++++++++++ 5 files changed, 239 insertions(+), 4 deletions(-) create mode 100644 drivers/staging/media/hantro/imx8m_vpu_hw.c