| Message ID | 20200408123215.2531-3-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] media: imx.rst: Fix the MIPI CSI-2 virtual channel | expand |
On 4/8/20 5:32 AM, Fabio Estevam wrote: > In order to improve the documentation, provide the OV5640 MIPI module > part number that is used on the imx6q-sabresd board. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com> > --- > Documentation/media/v4l-drivers/imx.rst | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst > index 3b4767f5f422..37b944f12d93 100644 > --- a/Documentation/media/v4l-drivers/imx.rst > +++ b/Documentation/media/v4l-drivers/imx.rst > @@ -641,8 +641,8 @@ connects to i2c bus 1 and the OV5640 to i2c bus 2. > The device tree for SabreSD includes OF graphs for both the parallel > OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI > CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled. > -The OV5640 module connects to MIPI connector J5 (sorry I don't have the > -compatible module part number or URL). > +The OV5640 module connects to MIPI connector J5. The NXP part number > +for the OV5640 module that connects to the SabreSD board is H120729. > > The following example configures a direct conversion pipeline to capture > from the OV5640, transmitting on MIPI CSI-2 virtual channel 0:
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 3b4767f5f422..37b944f12d93 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -641,8 +641,8 @@ connects to i2c bus 1 and the OV5640 to i2c bus 2. The device tree for SabreSD includes OF graphs for both the parallel OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled. -The OV5640 module connects to MIPI connector J5 (sorry I don't have the -compatible module part number or URL). +The OV5640 module connects to MIPI connector J5. The NXP part number +for the OV5640 module that connects to the SabreSD board is H120729. The following example configures a direct conversion pipeline to capture from the OV5640, transmitting on MIPI CSI-2 virtual channel 0:
In order to improve the documentation, provide the OV5640 MIPI module part number that is used on the imx6q-sabresd board. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- Documentation/media/v4l-drivers/imx.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)