diff mbox series

[v2,3/4] media: imx.rst: Provide the OV560 module part number

Message ID 20200409162945.3559-3-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/4] media: imx.rst: Fix the MIPI CSI-2 virtual channel | expand

Commit Message

Fabio Estevam April 9, 2020, 4:29 p.m. UTC 
In order to improve the documentation, provide the OV5640 MIPI module
part number that is used on the imx6q-sabresd board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
---
Changes since v1:
- None

 Documentation/media/v4l-drivers/imx.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index fb6e01976254..955d27582e10 100644
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -641,8 +641,8 @@  connects to i2c bus 1 and the OV5640 to i2c bus 2.
 The device tree for SabreSD includes OF graphs for both the parallel
 OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI
 CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled.
-The OV5640 module connects to MIPI connector J5 (sorry I don't have the
-compatible module part number or URL).
+The OV5640 module connects to MIPI connector J5. The NXP part number
+for the OV5640 module that connects to the SabreSD board is H120729.
 
 The following example configures unprocessed video capture pipeline to
 capture from the OV5640, transmitting on MIPI CSI-2 virtual channel 0: