| Message ID | 20200722203217.GA720@gofer.mess.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4l-utils,v2] Move sync-with-kernel make target into dedicated shell script ./sync-with-kernel.sh | expand |
Hi Sean, Patch looks good to me. Reviewed-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Thanks, Ariel On 7/22/20 5:32 PM, Sean Young wrote: > The sync-with-kernel make target is a collection of shell fragments scattered > over the tree. Collect all of them into a single shell script. This makes > it is easier to see what sync-with-kernel does, and makes the move away > from autotools to meson easier. > > Signed-off-by: Sean Young <sean@mess.org> > --- > Changes since v2: > - Implemented review changes > - Updated to latest master > > --- > Makefile.am | 58 +------------- > README | 4 +- > configure.ac | 2 +- > contrib/freebsd/Makefile.am | 14 ---- > contrib/test/Makefile.am | 9 --- > contrib/test/gen_ioctl_list.pl | 4 +- > contrib/test/ioctl-test.h | 2 +- > contrib/test/ioctl_32.h | 2 +- > contrib/test/ioctl_64.h | 2 +- > contrib/xc3028-firmware/Makefile.am | 9 --- > lib/libdvbv5/Makefile.am | 3 - > sync-with-kernel.sh | 115 ++++++++++++++++++++++++++++ > utils/keytable/Makefile.am | 13 ---- > 13 files changed, 127 insertions(+), 110 deletions(-) > create mode 100755 sync-with-kernel.sh > > diff --git a/Makefile.am b/Makefile.am > index 52eb8af9..3237ab49 100644 > --- a/Makefile.am > +++ b/Makefile.am > @@ -7,60 +7,10 @@ if WITH_V4LUTILS > SUBDIRS += utils contrib > endif > > -EXTRA_DIST = android-config.h bootstrap.sh doxygen_libdvbv5.cfg include COPYING.libv4l \ > - COPYING.libdvbv5 README.libv4l README.lib-multi-threading TODO.libdvbv5 \ > - doc/libdvbv5-index.doc > +EXTRA_DIST = android-config.h sync-with-kernel.sh bootstrap.sh \ > + doxygen_libdvbv5.cfg include COPYING.libv4l \ > + COPYING.libdvbv5 README.libv4l README.lib-multi-threading \ > + TODO.libdvbv5 doc/libdvbv5-index.doc > > include $(top_srcdir)/aminclude.am > > -# custom targets > - > -sync-with-kernel: > - @if [ ! -f $(KERNEL_DIR)/usr/include/linux/videodev2.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/fb.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-controls.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-common.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-subdev.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-mediabus.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/ivtv.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/dvb/frontend.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/dvb/dmx.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/lirc.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/bpf.h -o \ > - ! -f $(KERNEL_DIR)/usr/include/linux/bpf_common.h ]; then \ > - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ > - echo "and run 'make headers_install' in \$$KERNEL_DIR."; \ > - exit 1; \ > - fi > - cp -a $(KERNEL_DIR)/usr/include/linux/videodev2.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/fb.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-controls.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-common.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-subdev.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-mediabus.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/media-bus-format.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/media.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/ivtv.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/dvb/frontend.h $(top_srcdir)/include/linux/dvb > - cp $(top_srcdir)/include/linux/dvb/frontend.h $(top_srcdir)/lib/include/libdvbv5/dvb-frontend.h > - cp -a $(KERNEL_DIR)/usr/include/linux/dvb/dmx.h $(top_srcdir)/include/linux/dvb > - cp -a $(KERNEL_DIR)/usr/include/linux/lirc.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/bpf.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/bpf_common.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/cec.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/usr/include/linux/cec-funcs.h $(top_srcdir)/include/linux > - cp -a $(KERNEL_DIR)/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c $(top_srcdir)/utils/common > - cp -a $(KERNEL_DIR)/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c $(top_srcdir)/utils/common > - cp -a $(KERNEL_DIR)/include/media/tpg/v4l2-tpg.h $(top_srcdir)/utils/common > - cp -a $(KERNEL_DIR)/include/media/fwht-ctrls.h $(top_srcdir)/utils/common > - patch -d $(top_srcdir) --no-backup-if-mismatch -p1 <$(top_srcdir)/utils/common/v4l2-tpg.patch > - cp -a $(KERNEL_DIR)/drivers/media/test-drivers/vicodec/codec-fwht.[ch] $(top_srcdir)/utils/common/ > - cp -a $(KERNEL_DIR)/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.[ch] $(top_srcdir)/utils/common/ > - patch -d $(top_srcdir) --no-backup-if-mismatch -p1 <$(top_srcdir)/utils/common/codec-fwht.patch > - grep V4L2_.*_FMT.*descr $(KERNEL_DIR)/drivers/media/v4l2-core/v4l2-ioctl.c | grep -v V4L2_PIX_FMT_H264_SLICE | grep -v V4L2_PIX_FMT_VP8_FRAME | grep -v V4L2_PIX_FMT_HEVC_SLICE | perl -pe 's/.*V4L2_(.*)_FMT/\tcase V4L2_\1_FMT/; s/:.*descr = /: return /; s/;.*/;/;' >$(top_srcdir)/utils/common/v4l2-pix-formats.h > - > - $(MAKE) -C utils/keytable $@ > - $(MAKE) -C lib/libdvbv5 $@ > - $(MAKE) -C contrib/freebsd $@ > - $(MAKE) -C contrib/test $@ > - $(MAKE) -C contrib/xc3028-firmware $@ > diff --git a/README b/README > index e344dee1..48b33713 100644 > --- a/README > +++ b/README > @@ -264,11 +264,11 @@ Be sure that you have installed both glibc development packages for > > step 3) at v4l-utils tree: > > - $ export KERNEL_DIR=location/of/the/kernel/tree make sync-with-kernel > + $ export KERNEL_DIR=location/of/the/kernel/tree ./sync-with-kernel.sh > > Alternatively, steps 1 to 3 can be replaced with: > > -export KERNEL_DIR=location/of/the/kernel/tree && (cd $KERNEL_DIR && make headers_install INSTALL_HDR_PATH=usr/) && make sync-with-kernel > +export KERNEL_DIR=location/of/the/kernel/tree && (cd $KERNEL_DIR && make headers_install INSTALL_HDR_PATH=usr/) && ./sync-with-kernel.sh > > step 4) > > diff --git a/configure.ac b/configure.ac > index b3b090f2..d9f43ab5 100644 > --- a/configure.ac > +++ b/configure.ac > @@ -128,7 +128,7 @@ fi > AC_DEFINE_UNQUOTED(LOCALEDIR, "$v4l_localedir", [locale directory]) > AC_SUBST(localedir) > > -# sync-with-kernel and keytable install could make use of them > +# sync-with-kernel.sh and keytable install could make use of them > #AC_PROG_GREP > #AC_PROG_SED > gl_PROMOTED_TYPE_MODE_T > diff --git a/contrib/freebsd/Makefile.am b/contrib/freebsd/Makefile.am > index ca322749..abf0d57b 100644 > --- a/contrib/freebsd/Makefile.am > +++ b/contrib/freebsd/Makefile.am > @@ -1,17 +1,3 @@ > EXTRA_DIST = \ > include \ > patches > - > -sync-with-kernel: > - rm -rf .pc > - > - for i in input.h input-event-codes.h ivtv.h uinput.h videodev2.h v4l2-controls.h v4l2-common.h; do \ > - mkdir -p include/linux/$$(dirname $$i); \ > - cp $(KERNEL_DIR)/usr/include/linux/$$i include/linux/$$i; \ > - done > - > - for i in ivtv.h uinput.h videodev2.h v4l2-common.h; do \ > - sed -e 's/__u8/uint8_t/g' -e 's/__u16/uint16_t/g' -e 's/__u32/uint32_t/g' -e 's/__u64/uint64_t/g' -e 's/__s8/int8_t/g' -e 's/__s16/int16_t/g' -e 's/__s32/int32_t/g' -e 's/__s64/int64_t/g' -e 's/__le32/uint32_t/g' -e 's/__user//g' -i include/linux/$$i; \ > - done > - > - quilt push -a > diff --git a/contrib/test/Makefile.am b/contrib/test/Makefile.am > index 55e4ba09..5771ee4d 100644 > --- a/contrib/test/Makefile.am > +++ b/contrib/test/Makefile.am > @@ -57,15 +57,6 @@ capture_example_SOURCES = capture-example.c > > ioctl-test.c: ioctl-test.h > > -sync-with-kernel: > - ./gen_ioctl_list.pl --gen_ioctl_numbers >.tmp_ioctl.c > - gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl32 -m32 > - gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl64 -m64 > - ./tmp_ioctl32 32 >ioctl_32.h > - ./tmp_ioctl64 64 >ioctl_64.h > - rm .tmp_ioctl.c tmp_ioctl32 tmp_ioctl64 > - ./gen_ioctl_list.pl >ioctl-test.h > - > EXTRA_DIST = \ > gen_ioctl_list.pl \ > test-media \ > diff --git a/contrib/test/gen_ioctl_list.pl b/contrib/test/gen_ioctl_list.pl > index fca51778..9d59cd7f 100755 > --- a/contrib/test/gen_ioctl_list.pl > +++ b/contrib/test/gen_ioctl_list.pl > @@ -69,7 +69,7 @@ sub print_ioc() > printf "#define S_IOCTLS sizeof(ioctls)/sizeof(ioctls[0])\n"; > } > > -printf "/* This file is auto-generated by make sync-with-kernel */\n"; > +printf "/* This file is auto-generated by sync-with-kernel.sh */\n"; > printf "#include <linux/compiler.h>\n"; > > foreach my $h (sort keys %headers) { > @@ -110,7 +110,7 @@ my $arg = shift; > if ($arg eq "--gen_ioctl_numbers") { > printf "#include <stdio.h>\n"; > printf "int main(int argc, char *argv[]) {\n"; > - printf "\tprintf(\"/* This file is auto-generated by make sync-with-kernel */\\n\\n\");\n"; > + printf "\tprintf(\"/* This file is auto-generated by make sync-with-kernel.sh */\\n\\n\");\n"; > foreach my $ioctl (sort keys %ioc) { > printf "\tprintf(\"#define CMD%%s_%s 0x%%x\\n\", argv[1], %s);\n", $ioctl, $ioctl; > } > diff --git a/contrib/test/ioctl-test.h b/contrib/test/ioctl-test.h > index 32084c52..03b53078 100644 > --- a/contrib/test/ioctl-test.h > +++ b/contrib/test/ioctl-test.h > @@ -1,4 +1,4 @@ > -/* This file is auto-generated by make sync-with-kernel */ > +/* This file is auto-generated by sync-with-kernel.sh */ > #include <linux/compiler.h> > #include "linux/dvb/dmx.h" > #include "linux/dvb/frontend.h" > diff --git a/contrib/test/ioctl_32.h b/contrib/test/ioctl_32.h > index 6c008241..f6e7ef0b 100644 > --- a/contrib/test/ioctl_32.h > +++ b/contrib/test/ioctl_32.h > @@ -1,4 +1,4 @@ > -/* This file is auto-generated by make sync-with-kernel */ > +/* This file is auto-generated by make sync-with-kernel.sh */ > > #define CMD32_DMX_ADD_PID 0x40026f33 > #define CMD32_DMX_DQBUF 0xc0186f40 > diff --git a/contrib/test/ioctl_64.h b/contrib/test/ioctl_64.h > index 5001d7c7..a4d2448a 100644 > --- a/contrib/test/ioctl_64.h > +++ b/contrib/test/ioctl_64.h > @@ -1,4 +1,4 @@ > -/* This file is auto-generated by make sync-with-kernel */ > +/* This file is auto-generated by make sync-with-kernel.sh */ > > #define CMD64_DMX_ADD_PID 0x40026f33 > #define CMD64_DMX_DQBUF 0xc0186f40 > diff --git a/contrib/xc3028-firmware/Makefile.am b/contrib/xc3028-firmware/Makefile.am > index 43ff8b12..8b23d1e1 100644 > --- a/contrib/xc3028-firmware/Makefile.am > +++ b/contrib/xc3028-firmware/Makefile.am > @@ -3,12 +3,3 @@ noinst_PROGRAMS = firmware-tool > firmware_tool_SOURCES = firmware-tool.c standards.c extract_head.h standards.h tuner-xc2028-types.h > > EXTRA_DIST = README > - > -# custom targets > - > -sync-with-kernel: > - @if [ ! -f $(KERNEL_DIR)/drivers/media/tuners/tuner-xc2028-types.h ]; then \ > - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ > - exit 1; \ > - fi > - cp -a $(KERNEL_DIR)/drivers/media/tuners/tuner-xc2028-types.h $(srcdir)/ > diff --git a/lib/libdvbv5/Makefile.am b/lib/libdvbv5/Makefile.am > index e65066e9..09c261be 100644 > --- a/lib/libdvbv5/Makefile.am > +++ b/lib/libdvbv5/Makefile.am > @@ -122,6 +122,3 @@ libdvbv5_la_LDFLAGS = $(LIBDVBV5_VERSION) $(ENFORCE_LIBDVBV5_STATIC) $(LIBUDEV_L > libdvbv5_la_LIBADD = $(LTLIBICONV) > > EXTRA_DIST = README gen_dvb_structs.pl > - > -sync-with-kernel: > - ./gen_dvb_structs.pl $(KERNEL_DIR)/usr/include/ > diff --git a/sync-with-kernel.sh b/sync-with-kernel.sh > new file mode 100755 > index 00000000..28ad07f4 > --- /dev/null > +++ b/sync-with-kernel.sh > @@ -0,0 +1,115 @@ > +#!/bin/bash > + > +TOPSRCDIR="$( cd "$( dirname "$0" )" && pwd )" > + > +if [ -z "${KERNEL_DIR}" -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/videodev2.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/fb.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-controls.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-common.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-subdev.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-mediabus.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/ivtv.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/dvb/frontend.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/dvb/dmx.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/lirc.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/bpf.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/bpf_common.h -o \ > + ! -f ${KERNEL_DIR}/drivers/media/tuners/tuner-xc2028-types.h -o \ > + ! -f ${KERNEL_DIR}/usr/include/linux/input-event-codes.h ]; then > + echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir" > + echo "and run 'make headers_install' in \$KERNEL_DIR." > + exit 1 > +fi > + > +cp -a ${KERNEL_DIR}/usr/include/linux/videodev2.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/fb.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-controls.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-common.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-subdev.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-mediabus.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/media-bus-format.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/media.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/ivtv.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/dvb/frontend.h ${TOPSRCDIR}/include/linux/dvb > +cp ${TOPSRCDIR}/include/linux/dvb/frontend.h ${TOPSRCDIR}/lib/include/libdvbv5/dvb-frontend.h > +cp -a ${KERNEL_DIR}/usr/include/linux/dvb/dmx.h ${TOPSRCDIR}/include/linux/dvb > +cp -a ${KERNEL_DIR}/usr/include/linux/lirc.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/bpf.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/bpf_common.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/cec.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/usr/include/linux/cec-funcs.h ${TOPSRCDIR}/include/linux > +cp -a ${KERNEL_DIR}/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c ${TOPSRCDIR}/utils/common > +cp -a ${KERNEL_DIR}/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c ${TOPSRCDIR}/utils/common > +cp -a ${KERNEL_DIR}/include/media/tpg/v4l2-tpg.h ${TOPSRCDIR}/utils/common > +cp -a ${KERNEL_DIR}/include/media/fwht-ctrls.h ${TOPSRCDIR}/utils/common > +patch -d ${TOPSRCDIR} --no-backup-if-mismatch -p1 <${TOPSRCDIR}/utils/common/v4l2-tpg.patch > +cp -a ${KERNEL_DIR}/drivers/media/test-drivers/vicodec/codec-fwht.[ch] ${TOPSRCDIR}/utils/common/ > +cp -a ${KERNEL_DIR}/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.[ch] ${TOPSRCDIR}/utils/common/ > +patch -d ${TOPSRCDIR} --no-backup-if-mismatch -p1 <${TOPSRCDIR}/utils/common/codec-fwht.patch > +grep V4L2_.*_FMT.*descr ${KERNEL_DIR}/drivers/media/v4l2-core/v4l2-ioctl.c | grep -v V4L2_PIX_FMT_H264_SLICE | grep -v V4L2_PIX_FMT_VP8_FRAME | grep -v V4L2_PIX_FMT_HEVC_SLICE | perl -pe 's/.*V4L2_(.*)_FMT/\tcase V4L2_\1_FMT/; s/:.*descr = /: return /; s/;.*/;/;' >${TOPSRCDIR}/utils/common/v4l2-pix-formats.h > + > +function keytable { > + SRCDIR=${TOPSRCDIR}/utils/keytable > + > + cd ${SRCDIR} > + echo generating ${SRCDIR}/parse.h > + ./gen_input_events.pl < ${KERNEL_DIR}/usr/include/linux/input-event-codes.h > ${SRCDIR}/parse.h > + mkdir -p ${SRCDIR}/rc_keymaps > + rm -f ${SRCDIR}/rc_keymaps/* > + echo storing existing keymaps at ${SRCDIR}/rc_keymaps/ > + ./gen_keytables.pl ${KERNEL_DIR}; > + cp ${SRCDIR}/rc_keymaps_userspace/* ${SRCDIR}/rc_keymaps/ > +} > + > +function libdvbv5 { > + SRCDIR=${TOPSRCDIR}/lib/libdvbv5 > + > + cd ${SRCDIR} > + ./gen_dvb_structs.pl ${KERNEL_DIR}/usr/include/ > +} > + > +function xc3028-firmware { > + SRCDIR=${TOPSRCDIR}/contrib/xc3028-firmware > + > + cp -a ${KERNEL_DIR}/drivers/media/tuners/tuner-xc2028-types.h ${SRCDIR}/ > +} > + > +function ioctl-test { > + SRCDIR=${TOPSRCDIR}/contrib/test > + > + cd ${SRCDIR} > + > + ./gen_ioctl_list.pl --gen_ioctl_numbers >.tmp_ioctl.c > + gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl32 -m32 > + gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl64 -m64 > + ./tmp_ioctl32 32 >ioctl_32.h > + ./tmp_ioctl64 64 >ioctl_64.h > + rm .tmp_ioctl.c tmp_ioctl32 tmp_ioctl64 > + ./gen_ioctl_list.pl >ioctl-test.h > +} > + > +function freebsd { > + SRCDIR=${TOPSRCDIR}/contrib/freebsd > + > + cd ${SRCDIR} > + > + rm -rf .pc > + > + for i in input.h input-event-codes.h ivtv.h uinput.h videodev2.h v4l2-controls.h v4l2-common.h; do > + mkdir -p include/linux/$(dirname $i) > + cp ${KERNEL_DIR}/usr/include/linux/$i include/linux/$i > + done > + > + for i in ivtv.h uinput.h videodev2.h v4l2-common.h; do > + sed -e 's/__u8/uint8_t/g' -e 's/__u16/uint16_t/g' -e 's/__u32/uint32_t/g' -e 's/__u64/uint64_t/g' -e 's/__s8/int8_t/g' -e 's/__s16/int16_t/g' -e 's/__s32/int32_t/g' -e 's/__s64/int64_t/g' -e 's/__le32/uint32_t/g' -e 's/__user//g' -i include/linux/$i > + done > + > + quilt push -a > +} > + > +keytable > +libdvbv5 > +freebsd > +ioctl-test > +xc3028-firmware > diff --git a/utils/keytable/Makefile.am b/utils/keytable/Makefile.am > index 4724897e..a057eb89 100644 > --- a/utils/keytable/Makefile.am > +++ b/utils/keytable/Makefile.am > @@ -29,16 +29,3 @@ check: > # custom target > install-data-local: > $(install_sh) -d "$(DESTDIR)$(keytableuserdir)" > - > -sync-with-kernel: > - @if [ ! -f $(KERNEL_DIR)/usr/include/linux/input-event-codes.h ]; then \ > - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ > - exit 1; \ > - fi > - @echo generating $(srcdir)/parse.h > - @./gen_input_events.pl < $(KERNEL_DIR)/usr/include/linux/input-event-codes.h > $(srcdir)/parse.h > - @-mkdir -p $(srcdir)/rc_keymaps > - @-rm $(srcdir)/rc_keymaps/* > - @echo storing existing keymaps at $(srcdir)/rc_keymaps/ > - @cd $(srcdir) && ./gen_keytables.pl $(KERNEL_DIR); > - @-cp $(srcdir)/rc_keymaps_userspace/* $(srcdir)/rc_keymaps/ >
diff --git a/Makefile.am b/Makefile.am index 52eb8af9..3237ab49 100644 --- a/Makefile.am +++ b/Makefile.am @@ -7,60 +7,10 @@ if WITH_V4LUTILS SUBDIRS += utils contrib endif -EXTRA_DIST = android-config.h bootstrap.sh doxygen_libdvbv5.cfg include COPYING.libv4l \ - COPYING.libdvbv5 README.libv4l README.lib-multi-threading TODO.libdvbv5 \ - doc/libdvbv5-index.doc +EXTRA_DIST = android-config.h sync-with-kernel.sh bootstrap.sh \ + doxygen_libdvbv5.cfg include COPYING.libv4l \ + COPYING.libdvbv5 README.libv4l README.lib-multi-threading \ + TODO.libdvbv5 doc/libdvbv5-index.doc include $(top_srcdir)/aminclude.am -# custom targets - -sync-with-kernel: - @if [ ! -f $(KERNEL_DIR)/usr/include/linux/videodev2.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/fb.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-controls.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-common.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-subdev.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/v4l2-mediabus.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/ivtv.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/dvb/frontend.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/dvb/dmx.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/lirc.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/bpf.h -o \ - ! -f $(KERNEL_DIR)/usr/include/linux/bpf_common.h ]; then \ - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ - echo "and run 'make headers_install' in \$$KERNEL_DIR."; \ - exit 1; \ - fi - cp -a $(KERNEL_DIR)/usr/include/linux/videodev2.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/fb.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-controls.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-common.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-subdev.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/v4l2-mediabus.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/media-bus-format.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/media.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/ivtv.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/dvb/frontend.h $(top_srcdir)/include/linux/dvb - cp $(top_srcdir)/include/linux/dvb/frontend.h $(top_srcdir)/lib/include/libdvbv5/dvb-frontend.h - cp -a $(KERNEL_DIR)/usr/include/linux/dvb/dmx.h $(top_srcdir)/include/linux/dvb - cp -a $(KERNEL_DIR)/usr/include/linux/lirc.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/bpf.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/bpf_common.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/cec.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/usr/include/linux/cec-funcs.h $(top_srcdir)/include/linux - cp -a $(KERNEL_DIR)/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c $(top_srcdir)/utils/common - cp -a $(KERNEL_DIR)/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c $(top_srcdir)/utils/common - cp -a $(KERNEL_DIR)/include/media/tpg/v4l2-tpg.h $(top_srcdir)/utils/common - cp -a $(KERNEL_DIR)/include/media/fwht-ctrls.h $(top_srcdir)/utils/common - patch -d $(top_srcdir) --no-backup-if-mismatch -p1 <$(top_srcdir)/utils/common/v4l2-tpg.patch - cp -a $(KERNEL_DIR)/drivers/media/test-drivers/vicodec/codec-fwht.[ch] $(top_srcdir)/utils/common/ - cp -a $(KERNEL_DIR)/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.[ch] $(top_srcdir)/utils/common/ - patch -d $(top_srcdir) --no-backup-if-mismatch -p1 <$(top_srcdir)/utils/common/codec-fwht.patch - grep V4L2_.*_FMT.*descr $(KERNEL_DIR)/drivers/media/v4l2-core/v4l2-ioctl.c | grep -v V4L2_PIX_FMT_H264_SLICE | grep -v V4L2_PIX_FMT_VP8_FRAME | grep -v V4L2_PIX_FMT_HEVC_SLICE | perl -pe 's/.*V4L2_(.*)_FMT/\tcase V4L2_\1_FMT/; s/:.*descr = /: return /; s/;.*/;/;' >$(top_srcdir)/utils/common/v4l2-pix-formats.h - - $(MAKE) -C utils/keytable $@ - $(MAKE) -C lib/libdvbv5 $@ - $(MAKE) -C contrib/freebsd $@ - $(MAKE) -C contrib/test $@ - $(MAKE) -C contrib/xc3028-firmware $@ diff --git a/README b/README index e344dee1..48b33713 100644 --- a/README +++ b/README @@ -264,11 +264,11 @@ Be sure that you have installed both glibc development packages for step 3) at v4l-utils tree: - $ export KERNEL_DIR=location/of/the/kernel/tree make sync-with-kernel + $ export KERNEL_DIR=location/of/the/kernel/tree ./sync-with-kernel.sh Alternatively, steps 1 to 3 can be replaced with: -export KERNEL_DIR=location/of/the/kernel/tree && (cd $KERNEL_DIR && make headers_install INSTALL_HDR_PATH=usr/) && make sync-with-kernel +export KERNEL_DIR=location/of/the/kernel/tree && (cd $KERNEL_DIR && make headers_install INSTALL_HDR_PATH=usr/) && ./sync-with-kernel.sh step 4) diff --git a/configure.ac b/configure.ac index b3b090f2..d9f43ab5 100644 --- a/configure.ac +++ b/configure.ac @@ -128,7 +128,7 @@ fi AC_DEFINE_UNQUOTED(LOCALEDIR, "$v4l_localedir", [locale directory]) AC_SUBST(localedir) -# sync-with-kernel and keytable install could make use of them +# sync-with-kernel.sh and keytable install could make use of them #AC_PROG_GREP #AC_PROG_SED gl_PROMOTED_TYPE_MODE_T diff --git a/contrib/freebsd/Makefile.am b/contrib/freebsd/Makefile.am index ca322749..abf0d57b 100644 --- a/contrib/freebsd/Makefile.am +++ b/contrib/freebsd/Makefile.am @@ -1,17 +1,3 @@ EXTRA_DIST = \ include \ patches - -sync-with-kernel: - rm -rf .pc - - for i in input.h input-event-codes.h ivtv.h uinput.h videodev2.h v4l2-controls.h v4l2-common.h; do \ - mkdir -p include/linux/$$(dirname $$i); \ - cp $(KERNEL_DIR)/usr/include/linux/$$i include/linux/$$i; \ - done - - for i in ivtv.h uinput.h videodev2.h v4l2-common.h; do \ - sed -e 's/__u8/uint8_t/g' -e 's/__u16/uint16_t/g' -e 's/__u32/uint32_t/g' -e 's/__u64/uint64_t/g' -e 's/__s8/int8_t/g' -e 's/__s16/int16_t/g' -e 's/__s32/int32_t/g' -e 's/__s64/int64_t/g' -e 's/__le32/uint32_t/g' -e 's/__user//g' -i include/linux/$$i; \ - done - - quilt push -a diff --git a/contrib/test/Makefile.am b/contrib/test/Makefile.am index 55e4ba09..5771ee4d 100644 --- a/contrib/test/Makefile.am +++ b/contrib/test/Makefile.am @@ -57,15 +57,6 @@ capture_example_SOURCES = capture-example.c ioctl-test.c: ioctl-test.h -sync-with-kernel: - ./gen_ioctl_list.pl --gen_ioctl_numbers >.tmp_ioctl.c - gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl32 -m32 - gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl64 -m64 - ./tmp_ioctl32 32 >ioctl_32.h - ./tmp_ioctl64 64 >ioctl_64.h - rm .tmp_ioctl.c tmp_ioctl32 tmp_ioctl64 - ./gen_ioctl_list.pl >ioctl-test.h - EXTRA_DIST = \ gen_ioctl_list.pl \ test-media \ diff --git a/contrib/test/gen_ioctl_list.pl b/contrib/test/gen_ioctl_list.pl index fca51778..9d59cd7f 100755 --- a/contrib/test/gen_ioctl_list.pl +++ b/contrib/test/gen_ioctl_list.pl @@ -69,7 +69,7 @@ sub print_ioc() printf "#define S_IOCTLS sizeof(ioctls)/sizeof(ioctls[0])\n"; } -printf "/* This file is auto-generated by make sync-with-kernel */\n"; +printf "/* This file is auto-generated by sync-with-kernel.sh */\n"; printf "#include <linux/compiler.h>\n"; foreach my $h (sort keys %headers) { @@ -110,7 +110,7 @@ my $arg = shift; if ($arg eq "--gen_ioctl_numbers") { printf "#include <stdio.h>\n"; printf "int main(int argc, char *argv[]) {\n"; - printf "\tprintf(\"/* This file is auto-generated by make sync-with-kernel */\\n\\n\");\n"; + printf "\tprintf(\"/* This file is auto-generated by make sync-with-kernel.sh */\\n\\n\");\n"; foreach my $ioctl (sort keys %ioc) { printf "\tprintf(\"#define CMD%%s_%s 0x%%x\\n\", argv[1], %s);\n", $ioctl, $ioctl; } diff --git a/contrib/test/ioctl-test.h b/contrib/test/ioctl-test.h index 32084c52..03b53078 100644 --- a/contrib/test/ioctl-test.h +++ b/contrib/test/ioctl-test.h @@ -1,4 +1,4 @@ -/* This file is auto-generated by make sync-with-kernel */ +/* This file is auto-generated by sync-with-kernel.sh */ #include <linux/compiler.h> #include "linux/dvb/dmx.h" #include "linux/dvb/frontend.h" diff --git a/contrib/test/ioctl_32.h b/contrib/test/ioctl_32.h index 6c008241..f6e7ef0b 100644 --- a/contrib/test/ioctl_32.h +++ b/contrib/test/ioctl_32.h @@ -1,4 +1,4 @@ -/* This file is auto-generated by make sync-with-kernel */ +/* This file is auto-generated by make sync-with-kernel.sh */ #define CMD32_DMX_ADD_PID 0x40026f33 #define CMD32_DMX_DQBUF 0xc0186f40 diff --git a/contrib/test/ioctl_64.h b/contrib/test/ioctl_64.h index 5001d7c7..a4d2448a 100644 --- a/contrib/test/ioctl_64.h +++ b/contrib/test/ioctl_64.h @@ -1,4 +1,4 @@ -/* This file is auto-generated by make sync-with-kernel */ +/* This file is auto-generated by make sync-with-kernel.sh */ #define CMD64_DMX_ADD_PID 0x40026f33 #define CMD64_DMX_DQBUF 0xc0186f40 diff --git a/contrib/xc3028-firmware/Makefile.am b/contrib/xc3028-firmware/Makefile.am index 43ff8b12..8b23d1e1 100644 --- a/contrib/xc3028-firmware/Makefile.am +++ b/contrib/xc3028-firmware/Makefile.am @@ -3,12 +3,3 @@ noinst_PROGRAMS = firmware-tool firmware_tool_SOURCES = firmware-tool.c standards.c extract_head.h standards.h tuner-xc2028-types.h EXTRA_DIST = README - -# custom targets - -sync-with-kernel: - @if [ ! -f $(KERNEL_DIR)/drivers/media/tuners/tuner-xc2028-types.h ]; then \ - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ - exit 1; \ - fi - cp -a $(KERNEL_DIR)/drivers/media/tuners/tuner-xc2028-types.h $(srcdir)/ diff --git a/lib/libdvbv5/Makefile.am b/lib/libdvbv5/Makefile.am index e65066e9..09c261be 100644 --- a/lib/libdvbv5/Makefile.am +++ b/lib/libdvbv5/Makefile.am @@ -122,6 +122,3 @@ libdvbv5_la_LDFLAGS = $(LIBDVBV5_VERSION) $(ENFORCE_LIBDVBV5_STATIC) $(LIBUDEV_L libdvbv5_la_LIBADD = $(LTLIBICONV) EXTRA_DIST = README gen_dvb_structs.pl - -sync-with-kernel: - ./gen_dvb_structs.pl $(KERNEL_DIR)/usr/include/ diff --git a/sync-with-kernel.sh b/sync-with-kernel.sh new file mode 100755 index 00000000..28ad07f4 --- /dev/null +++ b/sync-with-kernel.sh @@ -0,0 +1,115 @@ +#!/bin/bash + +TOPSRCDIR="$( cd "$( dirname "$0" )" && pwd )" + +if [ -z "${KERNEL_DIR}" -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/videodev2.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/fb.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-controls.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-common.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-subdev.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/v4l2-mediabus.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/ivtv.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/dvb/frontend.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/dvb/dmx.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/lirc.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/bpf.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/bpf_common.h -o \ + ! -f ${KERNEL_DIR}/drivers/media/tuners/tuner-xc2028-types.h -o \ + ! -f ${KERNEL_DIR}/usr/include/linux/input-event-codes.h ]; then + echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir" + echo "and run 'make headers_install' in \$KERNEL_DIR." + exit 1 +fi + +cp -a ${KERNEL_DIR}/usr/include/linux/videodev2.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/fb.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-controls.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-common.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-subdev.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/v4l2-mediabus.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/media-bus-format.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/media.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/ivtv.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/dvb/frontend.h ${TOPSRCDIR}/include/linux/dvb +cp ${TOPSRCDIR}/include/linux/dvb/frontend.h ${TOPSRCDIR}/lib/include/libdvbv5/dvb-frontend.h +cp -a ${KERNEL_DIR}/usr/include/linux/dvb/dmx.h ${TOPSRCDIR}/include/linux/dvb +cp -a ${KERNEL_DIR}/usr/include/linux/lirc.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/bpf.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/bpf_common.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/cec.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/usr/include/linux/cec-funcs.h ${TOPSRCDIR}/include/linux +cp -a ${KERNEL_DIR}/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c ${TOPSRCDIR}/utils/common +cp -a ${KERNEL_DIR}/drivers/media/common/v4l2-tpg/v4l2-tpg-colors.c ${TOPSRCDIR}/utils/common +cp -a ${KERNEL_DIR}/include/media/tpg/v4l2-tpg.h ${TOPSRCDIR}/utils/common +cp -a ${KERNEL_DIR}/include/media/fwht-ctrls.h ${TOPSRCDIR}/utils/common +patch -d ${TOPSRCDIR} --no-backup-if-mismatch -p1 <${TOPSRCDIR}/utils/common/v4l2-tpg.patch +cp -a ${KERNEL_DIR}/drivers/media/test-drivers/vicodec/codec-fwht.[ch] ${TOPSRCDIR}/utils/common/ +cp -a ${KERNEL_DIR}/drivers/media/test-drivers/vicodec/codec-v4l2-fwht.[ch] ${TOPSRCDIR}/utils/common/ +patch -d ${TOPSRCDIR} --no-backup-if-mismatch -p1 <${TOPSRCDIR}/utils/common/codec-fwht.patch +grep V4L2_.*_FMT.*descr ${KERNEL_DIR}/drivers/media/v4l2-core/v4l2-ioctl.c | grep -v V4L2_PIX_FMT_H264_SLICE | grep -v V4L2_PIX_FMT_VP8_FRAME | grep -v V4L2_PIX_FMT_HEVC_SLICE | perl -pe 's/.*V4L2_(.*)_FMT/\tcase V4L2_\1_FMT/; s/:.*descr = /: return /; s/;.*/;/;' >${TOPSRCDIR}/utils/common/v4l2-pix-formats.h + +function keytable { + SRCDIR=${TOPSRCDIR}/utils/keytable + + cd ${SRCDIR} + echo generating ${SRCDIR}/parse.h + ./gen_input_events.pl < ${KERNEL_DIR}/usr/include/linux/input-event-codes.h > ${SRCDIR}/parse.h + mkdir -p ${SRCDIR}/rc_keymaps + rm -f ${SRCDIR}/rc_keymaps/* + echo storing existing keymaps at ${SRCDIR}/rc_keymaps/ + ./gen_keytables.pl ${KERNEL_DIR}; + cp ${SRCDIR}/rc_keymaps_userspace/* ${SRCDIR}/rc_keymaps/ +} + +function libdvbv5 { + SRCDIR=${TOPSRCDIR}/lib/libdvbv5 + + cd ${SRCDIR} + ./gen_dvb_structs.pl ${KERNEL_DIR}/usr/include/ +} + +function xc3028-firmware { + SRCDIR=${TOPSRCDIR}/contrib/xc3028-firmware + + cp -a ${KERNEL_DIR}/drivers/media/tuners/tuner-xc2028-types.h ${SRCDIR}/ +} + +function ioctl-test { + SRCDIR=${TOPSRCDIR}/contrib/test + + cd ${SRCDIR} + + ./gen_ioctl_list.pl --gen_ioctl_numbers >.tmp_ioctl.c + gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl32 -m32 + gcc -I ../../include/ .tmp_ioctl.c -o tmp_ioctl64 -m64 + ./tmp_ioctl32 32 >ioctl_32.h + ./tmp_ioctl64 64 >ioctl_64.h + rm .tmp_ioctl.c tmp_ioctl32 tmp_ioctl64 + ./gen_ioctl_list.pl >ioctl-test.h +} + +function freebsd { + SRCDIR=${TOPSRCDIR}/contrib/freebsd + + cd ${SRCDIR} + + rm -rf .pc + + for i in input.h input-event-codes.h ivtv.h uinput.h videodev2.h v4l2-controls.h v4l2-common.h; do + mkdir -p include/linux/$(dirname $i) + cp ${KERNEL_DIR}/usr/include/linux/$i include/linux/$i + done + + for i in ivtv.h uinput.h videodev2.h v4l2-common.h; do + sed -e 's/__u8/uint8_t/g' -e 's/__u16/uint16_t/g' -e 's/__u32/uint32_t/g' -e 's/__u64/uint64_t/g' -e 's/__s8/int8_t/g' -e 's/__s16/int16_t/g' -e 's/__s32/int32_t/g' -e 's/__s64/int64_t/g' -e 's/__le32/uint32_t/g' -e 's/__user//g' -i include/linux/$i + done + + quilt push -a +} + +keytable +libdvbv5 +freebsd +ioctl-test +xc3028-firmware diff --git a/utils/keytable/Makefile.am b/utils/keytable/Makefile.am index 4724897e..a057eb89 100644 --- a/utils/keytable/Makefile.am +++ b/utils/keytable/Makefile.am @@ -29,16 +29,3 @@ check: # custom target install-data-local: $(install_sh) -d "$(DESTDIR)$(keytableuserdir)" - -sync-with-kernel: - @if [ ! -f $(KERNEL_DIR)/usr/include/linux/input-event-codes.h ]; then \ - echo "Error you must set KERNEL_DIR to point to an extracted kernel source dir"; \ - exit 1; \ - fi - @echo generating $(srcdir)/parse.h - @./gen_input_events.pl < $(KERNEL_DIR)/usr/include/linux/input-event-codes.h > $(srcdir)/parse.h - @-mkdir -p $(srcdir)/rc_keymaps - @-rm $(srcdir)/rc_keymaps/* - @echo storing existing keymaps at $(srcdir)/rc_keymaps/ - @cd $(srcdir) && ./gen_keytables.pl $(KERNEL_DIR); - @-cp $(srcdir)/rc_keymaps_userspace/* $(srcdir)/rc_keymaps/
The sync-with-kernel make target is a collection of shell fragments scattered over the tree. Collect all of them into a single shell script. This makes it is easier to see what sync-with-kernel does, and makes the move away from autotools to meson easier. Signed-off-by: Sean Young <sean@mess.org> --- Changes since v2: - Implemented review changes - Updated to latest master --- Makefile.am | 58 +------------- README | 4 +- configure.ac | 2 +- contrib/freebsd/Makefile.am | 14 ---- contrib/test/Makefile.am | 9 --- contrib/test/gen_ioctl_list.pl | 4 +- contrib/test/ioctl-test.h | 2 +- contrib/test/ioctl_32.h | 2 +- contrib/test/ioctl_64.h | 2 +- contrib/xc3028-firmware/Makefile.am | 9 --- lib/libdvbv5/Makefile.am | 3 - sync-with-kernel.sh | 115 ++++++++++++++++++++++++++++ utils/keytable/Makefile.am | 13 ---- 13 files changed, 127 insertions(+), 110 deletions(-) create mode 100755 sync-with-kernel.sh