@@ -123,11 +123,6 @@ config S3C24XX_PLL
This also means that the PLL tables for the selected CPU(s) will
be built which may increase the size of the kernel image.
-config S3C_SETUP_CAMIF
- bool
- help
- Compile in common setup code for S3C CAMIF devices
-
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
@@ -468,7 +463,6 @@ config MACH_MINI2440
select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C_SETUP_CAMIF
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
@@ -97,4 +97,3 @@ obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
-obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o
deleted file mode 100644
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
-//
-// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-/* Number of camera port pins, without FIELD */
-#define S3C_CAMIF_NUM_GPIOS 13
-
-/* Default camera port configuration helpers. */
-
-static void camif_get_gpios(int *gpio_start, int *gpio_reset)
-{
-#ifdef CONFIG_ARCH_S3C24XX
- *gpio_start = S3C2410_GPJ(0);
- *gpio_reset = S3C2410_GPJ(12);
-#else
- /* s3c64xx */
- *gpio_start = S3C64XX_GPF(0);
- *gpio_reset = S3C64XX_GPF(3);
-#endif
-}
-
-int s3c_camif_gpio_get(void)
-{
- int gpio_start, gpio_reset;
- int ret, i;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
-
- if (gpio == gpio_reset)
- continue;
-
- ret = gpio_request(gpio, "camif");
- if (!ret)
- ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- if (ret) {
- pr_err("failed to configure GPIO %d\n", gpio);
- for (--i; i >= 0; i--)
- gpio_free(gpio--);
- return ret;
- }
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- return 0;
-}
-
-void s3c_camif_gpio_put(void)
-{
- int i, gpio_start, gpio_reset;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
- if (gpio != gpio_reset)
- gpio_free(gpio);
- }
-}
@@ -35,8 +35,4 @@ struct s3c_camif_plat_data {
int (*gpio_put)(void);
};
-/* Platform default helper functions */
-int s3c_camif_gpio_get(void);
-int s3c_camif_gpio_put(void);
-
#endif /* MEDIA_S3C_CAMIF_ */
The s3c-camif driver setup platform code does not have any users so it can be safely removed. Along with the code W=1 compile warnings go away: arch/arm/mach-s3c24xx/setup-camif.c:28:5: warning: no previous prototype for 's3c_camif_gpio_get' [-Wmissing-prototypes] arch/arm/mach-s3c24xx/setup-camif.c:56:6: warning: no previous prototype for 's3c_camif_gpio_put' [-Wmissing-prototypes] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Continuation of v2 here: https://patchwork.kernel.org/patch/11700881/ Changes since v2: 1. Drop setup-camif. Changes since v1: 1. New patch. --- arch/arm/mach-s3c24xx/Kconfig | 6 --- arch/arm/mach-s3c24xx/Makefile | 1 - arch/arm/mach-s3c24xx/setup-camif.c | 67 ----------------------------- include/media/drv-intf/s3c_camif.h | 4 -- 4 files changed, 78 deletions(-) delete mode 100644 arch/arm/mach-s3c24xx/setup-camif.c