| Message ID | 20201002165656.16744-2-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: ov772x: Enable BT.656 mode and test pattern support | expand |
Hi Prabhakar, On Fri, Oct 02, 2020 at 05:56:54PM +0100, Lad Prabhakar wrote: > Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse() > to determine the bus type and store it in the driver structure. > > Set bus_type to V4L2_MBUS_PARALLEL as it's the only supported one > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > drivers/media/i2c/ov772x.c | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c > index 2cc6a678069a..b56f8d7609e6 100644 > --- a/drivers/media/i2c/ov772x.c > +++ b/drivers/media/i2c/ov772x.c > @@ -31,6 +31,7 @@ > #include <media/v4l2-ctrls.h> > #include <media/v4l2-device.h> > #include <media/v4l2-event.h> > +#include <media/v4l2-fwnode.h> > #include <media/v4l2-image-sizes.h> > #include <media/v4l2-subdev.h> > > @@ -434,6 +435,7 @@ struct ov772x_priv { > #ifdef CONFIG_MEDIA_CONTROLLER > struct media_pad pad; > #endif > + enum v4l2_mbus_type bus_type; > }; > > /* > @@ -1348,6 +1350,33 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = { > .pad = &ov772x_subdev_pad_ops, > }; > > +static int ov772x_parse_dt(struct i2c_client *client, > + struct ov772x_priv *priv) > +{ > + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_PARALLEL }; This one gets over 80. > + struct fwnode_handle *ep; > + int ret; > + > + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), > + NULL); And this needs no newline. > + if (!ep) { > + dev_err(&client->dev, "Endpoint node not found\n"); > + return -EINVAL; > + } > + > + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); > + if (ret) > + goto error_fwnode_put; > + > + priv->bus_type = bus_cfg.bus_type; > + v4l2_fwnode_endpoint_free(&bus_cfg); > + > +error_fwnode_put: > + fwnode_handle_put(ep); > + > + return ret; > +} > + > /* > * i2c_driver function > */ > @@ -1415,6 +1444,10 @@ static int ov772x_probe(struct i2c_client *client) > goto error_clk_put; > } > > + ret = ov772x_parse_dt(client, priv); > + if (ret) > + goto error_clk_put; > + > ret = ov772x_video_probe(priv); > if (ret < 0) > goto error_gpio_put;
Hi Sakari, Thank you for the review. On Fri, Oct 2, 2020 at 10:12 PM Sakari Ailus <sakari.ailus@linux.intel.com> wrote: > > Hi Prabhakar, > > On Fri, Oct 02, 2020 at 05:56:54PM +0100, Lad Prabhakar wrote: > > Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse() > > to determine the bus type and store it in the driver structure. > > > > Set bus_type to V4L2_MBUS_PARALLEL as it's the only supported one > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > --- > > drivers/media/i2c/ov772x.c | 33 +++++++++++++++++++++++++++++++++ > > 1 file changed, 33 insertions(+) > > > > diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c > > index 2cc6a678069a..b56f8d7609e6 100644 > > --- a/drivers/media/i2c/ov772x.c > > +++ b/drivers/media/i2c/ov772x.c > > @@ -31,6 +31,7 @@ > > #include <media/v4l2-ctrls.h> > > #include <media/v4l2-device.h> > > #include <media/v4l2-event.h> > > +#include <media/v4l2-fwnode.h> > > #include <media/v4l2-image-sizes.h> > > #include <media/v4l2-subdev.h> > > > > @@ -434,6 +435,7 @@ struct ov772x_priv { > > #ifdef CONFIG_MEDIA_CONTROLLER > > struct media_pad pad; > > #endif > > + enum v4l2_mbus_type bus_type; > > }; > > > > /* > > @@ -1348,6 +1350,33 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = { > > .pad = &ov772x_subdev_pad_ops, > > }; > > > > +static int ov772x_parse_dt(struct i2c_client *client, > > + struct ov772x_priv *priv) > > +{ > > + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_PARALLEL }; > > This one gets over 80. > Argh I need to adjust my checkpatch script > > + struct fwnode_handle *ep; > > + int ret; > > + > > + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), > > + NULL); > > And this needs no newline. > Agreed. Cheers, Prabhakar
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c index 2cc6a678069a..b56f8d7609e6 100644 --- a/drivers/media/i2c/ov772x.c +++ b/drivers/media/i2c/ov772x.c @@ -31,6 +31,7 @@ #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> #include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> #include <media/v4l2-image-sizes.h> #include <media/v4l2-subdev.h> @@ -434,6 +435,7 @@ struct ov772x_priv { #ifdef CONFIG_MEDIA_CONTROLLER struct media_pad pad; #endif + enum v4l2_mbus_type bus_type; }; /* @@ -1348,6 +1350,33 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = { .pad = &ov772x_subdev_pad_ops, }; +static int ov772x_parse_dt(struct i2c_client *client, + struct ov772x_priv *priv) +{ + struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_PARALLEL }; + struct fwnode_handle *ep; + int ret; + + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), + NULL); + if (!ep) { + dev_err(&client->dev, "Endpoint node not found\n"); + return -EINVAL; + } + + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); + if (ret) + goto error_fwnode_put; + + priv->bus_type = bus_cfg.bus_type; + v4l2_fwnode_endpoint_free(&bus_cfg); + +error_fwnode_put: + fwnode_handle_put(ep); + + return ret; +} + /* * i2c_driver function */ @@ -1415,6 +1444,10 @@ static int ov772x_probe(struct i2c_client *client) goto error_clk_put; } + ret = ov772x_parse_dt(client, priv); + if (ret) + goto error_clk_put; + ret = ov772x_video_probe(priv); if (ret < 0) goto error_gpio_put;