@@ -327,12 +327,12 @@ static void __vb2_buf_mem_prepare(struct vb2_buffer *vb)
if (vb->synced)
return;
- if (vb->need_cache_sync_on_prepare) {
- for (plane = 0; plane < vb->num_planes; ++plane)
- call_void_memop(vb, prepare,
- vb->planes[plane].mem_priv);
- }
vb->synced = 1;
+ if (vb->skip_cache_sync_on_prepare)
+ return;
+
+ for (plane = 0; plane < vb->num_planes; ++plane)
+ call_void_memop(vb, prepare, vb->planes[plane].mem_priv);
}
/*
@@ -346,12 +346,12 @@ static void __vb2_buf_mem_finish(struct vb2_buffer *vb)
if (!vb->synced)
return;
- if (vb->need_cache_sync_on_finish) {
- for (plane = 0; plane < vb->num_planes; ++plane)
- call_void_memop(vb, finish,
- vb->planes[plane].mem_priv);
- }
vb->synced = 0;
+ if (vb->skip_cache_sync_on_finish)
+ return;
+
+ for (plane = 0; plane < vb->num_planes; ++plane)
+ call_void_memop(vb, finish, vb->planes[plane].mem_priv);
}
/*
@@ -415,17 +415,6 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
vb->index = q->num_buffers + buffer;
vb->type = q->type;
vb->memory = memory;
- /*
- * We need to set these flags here so that the videobuf2 core
- * will call ->prepare()/->finish() cache sync/flush on vb2
- * buffers when appropriate. However, we can avoid explicit
- * ->prepare() and ->finish() cache sync for DMABUF buffers,
- * because DMA exporter takes care of it.
- */
- if (q->memory != VB2_MEMORY_DMABUF) {
- vb->need_cache_sync_on_prepare = 1;
- vb->need_cache_sync_on_finish = 1;
- }
for (plane = 0; plane < num_planes; ++plane) {
vb->planes[plane].length = plane_sizes[plane];
vb->planes[plane].min_length = plane_sizes[plane];
@@ -351,18 +351,11 @@ static void set_buffer_cache_hints(struct vb2_queue *q,
* we always need ->prepare() or/and ->finish() cache sync.
*/
if (q->memory == VB2_MEMORY_DMABUF) {
- vb->need_cache_sync_on_finish = 0;
- vb->need_cache_sync_on_prepare = 0;
+ vb->skip_cache_sync_on_finish = 1;
+ vb->skip_cache_sync_on_prepare = 1;
return;
}
- /*
- * Cache sync/invalidation flags are set by default in order to
- * preserve existing behaviour for old apps/drivers.
- */
- vb->need_cache_sync_on_prepare = 1;
- vb->need_cache_sync_on_finish = 1;
-
if (!vb2_queue_allows_cache_hints(q)) {
/*
* Clear buffer cache flags if queue does not support user
@@ -379,13 +372,13 @@ static void set_buffer_cache_hints(struct vb2_queue *q,
* TO_DEVICE.
*/
if (q->dma_dir == DMA_TO_DEVICE)
- vb->need_cache_sync_on_finish = 0;
+ vb->skip_cache_sync_on_finish = 1;
if (b->flags & V4L2_BUF_FLAG_NO_CACHE_INVALIDATE)
- vb->need_cache_sync_on_finish = 0;
+ vb->skip_cache_sync_on_finish = 1;
if (b->flags & V4L2_BUF_FLAG_NO_CACHE_CLEAN)
- vb->need_cache_sync_on_prepare = 0;
+ vb->skip_cache_sync_on_prepare = 1;
}
static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *mdev,
@@ -265,10 +265,10 @@ struct vb2_buffer {
* after the 'buf_finish' op is called.
* copied_timestamp: the timestamp of this capture buffer was copied
* from an output buffer.
- * need_cache_sync_on_prepare: when set buffer's ->prepare() function
- * performs cache sync/invalidation.
- * need_cache_sync_on_finish: when set buffer's ->finish() function
- * performs cache sync/invalidation.
+ * skip_cache_sync_on_prepare: when set buffer's ->prepare() function
+ * skips cache sync/invalidation.
+ * skip_cache_sync_on_finish: when set buffer's ->finish() function
+ * skips cache sync/invalidation.
* queued_entry: entry on the queued buffers list, which holds
* all buffers queued from userspace
* done_entry: entry on the list that stores all buffers ready
@@ -279,8 +279,8 @@ struct vb2_buffer {
unsigned int synced:1;
unsigned int prepared:1;
unsigned int copied_timestamp:1;
- unsigned int need_cache_sync_on_prepare:1;
- unsigned int need_cache_sync_on_finish:1;
+ unsigned int skip_cache_sync_on_prepare:1;
+ unsigned int skip_cache_sync_on_finish:1;
struct vb2_plane planes[VB2_MAX_PLANES];
struct list_head queued_entry;
It would be less error prone if the default cache hints value (we kzalloc() structs, so it's zeroed out by default) would be to "always sync/flush" caches. Inverse and rename cache hints flags. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> --- .../media/common/videobuf2/videobuf2-core.c | 31 ++++++------------- .../media/common/videobuf2/videobuf2-v4l2.c | 17 +++------- include/media/videobuf2-core.h | 12 +++---- 3 files changed, 21 insertions(+), 39 deletions(-)