@@ -206,7 +206,7 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
G1_REG_TOPFIELDFIRST_E(pic->flags & V4L2_MPEG2_PIC_FLAG_TOP_FIELD_FIRST);
vdpu_write_relaxed(vpu, reg, G1_SWREG(4));
- reg = G1_REG_STRM_START_BIT(slice_params->data_bit_offset) |
+ reg = G1_REG_STRM_START_BIT(0) |
G1_REG_QSCALE_TYPE(pic->flags & V4L2_MPEG2_PIC_FLAG_Q_SCALE_TYPE) |
G1_REG_CON_MV_E(pic->flags & V4L2_MPEG2_PIC_FLAG_CONCEALMENT_MV) |
G1_REG_INTRA_DC_PREC(pic->intra_dc_precision) |
@@ -215,7 +215,7 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
vdpu_write_relaxed(vpu, reg, G1_SWREG(5));
reg = G1_REG_INIT_QP(1) |
- G1_REG_STREAM_LEN(slice_params->bit_size >> 3);
+ G1_REG_STREAM_LEN(vb2_get_plane_payload(&src_buf->vb2_buf, 0));
vdpu_write_relaxed(vpu, reg, G1_SWREG(6));
reg = G1_REG_ALT_SCAN_FLAG_E(pic->flags & V4L2_MPEG2_PIC_FLAG_ALT_SCAN) |
@@ -179,7 +179,7 @@ void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx)
vdpu_write_relaxed(vpu, reg, VDPU_SWREG(50));
reg = VDPU_REG_INIT_QP(1) |
- VDPU_REG_STREAM_LEN(slice_params->bit_size >> 3);
+ VDPU_REG_STREAM_LEN(vb2_get_plane_payload(&src_buf->vb2_buf, 0));
vdpu_write_relaxed(vpu, reg, VDPU_SWREG(51));
reg = VDPU_REG_APF_THRESHOLD(8) |
@@ -222,7 +222,7 @@ void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx)
VDPU_REG_TOPFIELDFIRST_E(pic->flags & V4L2_MPEG2_PIC_FLAG_TOP_FIELD_FIRST);
vdpu_write_relaxed(vpu, reg, VDPU_SWREG(120));
- reg = VDPU_REG_STRM_START_BIT(slice_params->data_bit_offset) |
+ reg = VDPU_REG_STRM_START_BIT(0) |
VDPU_REG_QSCALE_TYPE(pic->flags & V4L2_MPEG2_PIC_FLAG_Q_SCALE_TYPE) |
VDPU_REG_CON_MV_E(pic->flags & V4L2_MPEG2_PIC_FLAG_CONCEALMENT_MV) |
VDPU_REG_INTRA_DC_PREC(pic->intra_dc_precision) |
@@ -152,10 +152,9 @@ static void cedrus_mpeg2_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
/* Source offset and length in bits. */
- cedrus_write(dev, VE_DEC_MPEG_VLD_OFFSET,
- slice_params->data_bit_offset);
+ cedrus_write(dev, VE_DEC_MPEG_VLD_OFFSET, 0);
- reg = slice_params->bit_size - slice_params->data_bit_offset;
+ reg = vb2_get_plane_payload(&run->src->vb2_buf, 0) * 8;
cedrus_write(dev, VE_DEC_MPEG_VLD_LEN, reg);
/* Source beginning and end addresses. */
@@ -169,7 +168,7 @@ static void cedrus_mpeg2_setup(struct cedrus_ctx *ctx, struct cedrus_run *run)
cedrus_write(dev, VE_DEC_MPEG_VLD_ADDR, reg);
- reg = src_buf_addr + DIV_ROUND_UP(slice_params->bit_size, 8);
+ reg = src_buf_addr + vb2_get_plane_payload(&run->src->vb2_buf, 0);
cedrus_write(dev, VE_DEC_MPEG_VLD_END_ADDR, reg);
/* Macroblock address: start at the beginning. */
The MPEG2_SLICE_PARAMS control is designed to refer to a single slice. However, the Hantro and Cedrus drivers operate in per-frame mode, and so does the current Ffmpeg and GStreamer implementations that are tested with these two drivers. In other words, the drivers are expecting all the slices in a picture (with either frame or field structure) to be contained in the OUTPUT buffer, which means the slice size and offset shouldn't be used. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> --- drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c | 4 ++-- drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c | 4 ++-- drivers/staging/media/sunxi/cedrus/cedrus_mpeg2.c | 7 +++---- 3 files changed, 7 insertions(+), 8 deletions(-)