| Message ID | 20210330173348.30135-15-p.yadav@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | CSI2RX support on J721E | expand |
Hi Pratyush, Thank you for the patch. On Tue, Mar 30, 2021 at 11:03:46PM +0530, Pratyush Yadav wrote: > Convert Cadence DPHY binding to YAML. > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > --- > .../devicetree/bindings/phy/cdns,dphy.txt | 20 -------- > .../devicetree/bindings/phy/cdns,dphy.yaml | 51 +++++++++++++++++++ > 2 files changed, 51 insertions(+), 20 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt > create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml > > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt > deleted file mode 100644 > index 1095bc4e72d9..000000000000 > --- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt > +++ /dev/null > @@ -1,20 +0,0 @@ > -Cadence DPHY > -============ > - > -Cadence DPHY block. > - > -Required properties: > -- compatible: should be set to "cdns,dphy". > -- reg: physical base address and length of the DPHY registers. > -- clocks: DPHY reference clocks. > -- clock-names: must contain "psm" and "pll_ref". > -- #phy-cells: must be set to 0. > - > -Example: > - dphy0: dphy@fd0e0000{ > - compatible = "cdns,dphy"; > - reg = <0x0 0xfd0e0000 0x0 0x1000>; > - clocks = <&psm_clk>, <&pll_ref_clk>; > - clock-names = "psm", "pll_ref"; > - #phy-cells = <0>; > - }; > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml > new file mode 100644 > index 000000000000..d1bbf96a8250 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cadence DPHY Device Tree Bindings > + > +maintainers: > + - Pratyush Yadav <p.yadav@ti.com> > + > +properties: > + compatible: > + items: > + - const: cdns,dphy > + > + reg: > + maxItems: 1 > + description: Physical base address and length of the DPHY registers. You can drop the description. > + > + clocks: > + maxItems: 2 > + description: DPHY reference clocks. It's best to describe individual items, which will then allow dropping the maxItems property: clocks: items: - description: Description of the psm clock - description: Description of the pll_ref clock > + > + clock-names: > + items: > + - const: psm > + - const: pll_ref > + > + "#phy-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#phy-cells" > + > +additionalProperties: false > + > +examples: > + - | > + > + dphy0: dphy@fd0e0000{ This is copied verbatim from the existing description, but while at it, I'd rename the node from dphy@... to phy@..., as DT node are supposed to be named according to the class of devices, not the specific device type. With these small issues addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + compatible = "cdns,dphy"; > + reg = <0xfd0e0000 0x1000>; > + clocks = <&psm_clk>, <&pll_ref_clk>; > + clock-names = "psm", "pll_ref"; > + #phy-cells = <0>; > + };
On 02/04/21 01:23PM, Laurent Pinchart wrote: > Hi Pratyush, > > Thank you for the patch. > > On Tue, Mar 30, 2021 at 11:03:46PM +0530, Pratyush Yadav wrote: > > Convert Cadence DPHY binding to YAML. > > > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > > --- > > .../devicetree/bindings/phy/cdns,dphy.txt | 20 -------- > > .../devicetree/bindings/phy/cdns,dphy.yaml | 51 +++++++++++++++++++ > > 2 files changed, 51 insertions(+), 20 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt > > create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml > > > > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt > > deleted file mode 100644 > > index 1095bc4e72d9..000000000000 > > --- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt > > +++ /dev/null > > @@ -1,20 +0,0 @@ > > -Cadence DPHY > > -============ > > - > > -Cadence DPHY block. > > - > > -Required properties: > > -- compatible: should be set to "cdns,dphy". > > -- reg: physical base address and length of the DPHY registers. > > -- clocks: DPHY reference clocks. > > -- clock-names: must contain "psm" and "pll_ref". > > -- #phy-cells: must be set to 0. > > - > > -Example: > > - dphy0: dphy@fd0e0000{ > > - compatible = "cdns,dphy"; > > - reg = <0x0 0xfd0e0000 0x0 0x1000>; > > - clocks = <&psm_clk>, <&pll_ref_clk>; > > - clock-names = "psm", "pll_ref"; > > - #phy-cells = <0>; > > - }; > > diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml > > new file mode 100644 > > index 000000000000..d1bbf96a8250 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml > > @@ -0,0 +1,51 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Cadence DPHY Device Tree Bindings > > + > > +maintainers: > > + - Pratyush Yadav <p.yadav@ti.com> > > + > > +properties: > > + compatible: > > + items: > > + - const: cdns,dphy > > + > > + reg: > > + maxItems: 1 > > + description: Physical base address and length of the DPHY registers. > > You can drop the description. Ok. > > > + > > + clocks: > > + maxItems: 2 > > + description: DPHY reference clocks. > > It's best to describe individual items, which will then allow dropping > the maxItems property: > > clocks: > items: > - description: Description of the psm clock > - description: Description of the pll_ref clock Ok. Though I'd mention that I am not 100% sure what the pll_ref clock is supposed to be. The original binding doesn't have a description either. > > > + > > + clock-names: > > + items: > > + - const: psm > > + - const: pll_ref > > + > > + "#phy-cells": > > + const: 0 > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - "#phy-cells" > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + > > + dphy0: dphy@fd0e0000{ > > This is copied verbatim from the existing description, but while at it, > I'd rename the node from dphy@... to phy@..., as DT node are supposed to > be named according to the class of devices, not the specific device > type. Ok. > > With these small issues addressed, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Thanks. > > > + compatible = "cdns,dphy"; > > + reg = <0xfd0e0000 0x1000>; > > + clocks = <&psm_clk>, <&pll_ref_clk>; > > + clock-names = "psm", "pll_ref"; > > + #phy-cells = <0>; > > + }; > > -- > Regards, > > Laurent Pinchart
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt deleted file mode 100644 index 1095bc4e72d9..000000000000 --- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt +++ /dev/null @@ -1,20 +0,0 @@ -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - -Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml new file mode 100644 index 000000000000..d1bbf96a8250 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence DPHY Device Tree Bindings + +maintainers: + - Pratyush Yadav <p.yadav@ti.com> + +properties: + compatible: + items: + - const: cdns,dphy + + reg: + maxItems: 1 + description: Physical base address and length of the DPHY registers. + + clocks: + maxItems: 2 + description: DPHY reference clocks. + + clock-names: + items: + - const: psm + - const: pll_ref + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0xfd0e0000 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + };
Convert Cadence DPHY binding to YAML. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> --- .../devicetree/bindings/phy/cdns,dphy.txt | 20 -------- .../devicetree/bindings/phy/cdns,dphy.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 20 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml