@@ -879,24 +879,59 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
return 0;
}
+static int cal_ctx_v4l2_init_mc_format(struct cal_ctx *ctx)
+{
+ const struct cal_format_info *fmtinfo;
+ struct v4l2_pix_format *pix_fmt = &ctx->v_fmt.fmt.pix;
+
+ fmtinfo = cal_format_by_code(MEDIA_BUS_FMT_UYVY8_2X8);
+ if (!fmtinfo)
+ return -EINVAL;
+
+ pix_fmt->width = 640;
+ pix_fmt->height = 480;
+ pix_fmt->field = V4L2_FIELD_NONE;
+ pix_fmt->colorspace = V4L2_COLORSPACE_SRGB;
+ pix_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
+ pix_fmt->quantization = V4L2_QUANTIZATION_LIM_RANGE;
+ pix_fmt->xfer_func = V4L2_XFER_FUNC_SRGB;
+ pix_fmt->pixelformat = fmtinfo->fourcc;
+
+ ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ /* Save current format */
+ cal_calc_format_size(ctx, fmtinfo, &ctx->v_fmt);
+ ctx->fmtinfo = fmtinfo;
+
+ return 0;
+}
+
int cal_ctx_v4l2_register(struct cal_ctx *ctx)
{
struct video_device *vfd = &ctx->vdev;
int ret;
- ret = cal_ctx_v4l2_init_formats(ctx);
- if (ret)
- return ret;
-
if (!cal_mc_api) {
struct v4l2_ctrl_handler *hdl = &ctx->ctrl_handler;
+ ret = cal_ctx_v4l2_init_formats(ctx);
+ if (ret) {
+ ctx_err(ctx, "Failed to init formats: %d\n", ret);
+ return ret;
+ }
+
ret = v4l2_ctrl_add_handler(hdl, ctx->phy->source->ctrl_handler,
NULL, true);
if (ret < 0) {
ctx_err(ctx, "Failed to add source ctrl handler\n");
return ret;
}
+ } else {
+ ret = cal_ctx_v4l2_init_mc_format(ctx);
+ if (ret) {
+ ctx_err(ctx, "Failed to init format: %d\n", ret);
+ return ret;
+ }
}
ret = video_register_device(vfd, VFL_TYPE_VIDEO, cal_video_nr);
@@ -213,7 +213,7 @@ struct cal_ctx {
/* Used to store current pixel format */
struct v4l2_format v_fmt;
- /* Current subdev enumerated format */
+ /* Current subdev enumerated format (legacy) */
const struct cal_format_info **active_fmt;
unsigned int num_active_fmt;
CAL driver enumerates mbus codes in the connected subdev to create a list of supported formats reported to userspace, and initializes ctx->v_fmt and ctx->fmtinfo to one of those formats. This works fine for legacy mode, but is not correct for MC mode, and the list is not even used in MC mode. Fix this by adding a new function, cal_ctx_v4l2_init_mc_format, which only initializes ctx->v_fmt and ctx->fmtinfo to a default value. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> --- drivers/media/platform/ti-vpe/cal-video.c | 43 ++++++++++++++++++++--- drivers/media/platform/ti-vpe/cal.h | 2 +- 2 files changed, 40 insertions(+), 5 deletions(-)