| Message ID | 20210526152308.16525-15-p.yadav@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | CSI2RX support on J721E | expand |
On Wed, 26 May 2021 20:53:04 +0530, Pratyush Yadav wrote: > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate > capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the > parts together. > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > > --- > > Changes in v2: > - Rename to ti,j721e-csi2rx.yaml > - Add an entry in MAINTAINERS. > - Add a description for the binding. > - Change compatible to ti,j721e-csi2rx to make it SoC specific. > - Remove description from dmas, reg, power-domains. > - Remove a limit of 2 from #address-cells and #size-cells. > - Fix add ^ to csi-bridge subnode regex. > - Make ranges mandatory. > - Add unit address in example. > - Add a reference to cdns,csi2rx in csi-bridge subnode. > - Expand the example to include the csi-bridge subnode as well. > - Re-order subject prefixes. > > .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml' xargs: dt-doc-validate: exited with status 255; aborting make[1]: *** Deleting file 'Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml' Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml' make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml] Error 255 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1416: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1484096 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 27/05/21 09:23AM, Rob Herring wrote: > On Wed, 26 May 2021 20:53:04 +0530, Pratyush Yadav wrote: > > TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate > > capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the > > parts together. > > > > Signed-off-by: Pratyush Yadav <p.yadav@ti.com> > > > > --- > > > > Changes in v2: > > - Rename to ti,j721e-csi2rx.yaml > > - Add an entry in MAINTAINERS. > > - Add a description for the binding. > > - Change compatible to ti,j721e-csi2rx to make it SoC specific. > > - Remove description from dmas, reg, power-domains. > > - Remove a limit of 2 from #address-cells and #size-cells. > > - Fix add ^ to csi-bridge subnode regex. > > - Make ranges mandatory. > > - Add unit address in example. > > - Add a reference to cdns,csi2rx in csi-bridge subnode. > > - Expand the example to include the csi-bridge subnode as well. > > - Re-order subject prefixes. > > > > .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 102 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml' > xargs: dt-doc-validate: exited with status 255; aborting > make[1]: *** Deleting file 'Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml' > Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/dtschema/schemas/media/cdns,csi2rx.yaml' > make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.example.dt.yaml] Error 255 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1416: dt_binding_check] Error 2 > > See https://patchwork.ozlabs.org/patch/1484096 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. I think this is the case here since it can't find the ti,j721e-csi2rx.yaml file. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. >
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml new file mode 100644 index 000000000000..db87cfd65bed --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721E CSI2RX Wrapper Device Tree Bindings + +description: | + The TI J721E CSI2RX Wrapper is a wrapper around Cadence CSI2RX bridge that + enables sending captured frames to memory over PSI-L DMA. In the J721E + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the + CSI_RX_IF section. + +maintainers: + - Pratyush Yadav <p.yadav@ti.com> + +properties: + compatible: + items: + - const: ti,j721e-csi2rx + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx0 + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "^csi-bridge@": + type: object + description: CSI2 bridge node. + $ref: cdns,csi2rx.yaml# + +required: + - compatible + - reg + - dmas + - dma-names + - power-domains + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx"; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + reg = <0x4500000 0x1000>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cdns_csi2rx: csi-bridge@4504000 { + compatible = "cdns,csi2rx"; + reg = <0x4504000 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + + reg = <0>; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 2cf140a02063..1f9de488564d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18336,6 +18336,7 @@ TI J721E CSI2RX DRIVER M: Pratyush Yadav <p.yadav@ti.com> L: linux-media@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml F: drivers/media/platform/ti/j721e-csi2rx/ TI DAVINCI MACHINE SUPPORT
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the parts together. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> --- Changes in v2: - Rename to ti,j721e-csi2rx.yaml - Add an entry in MAINTAINERS. - Add a description for the binding. - Change compatible to ti,j721e-csi2rx to make it SoC specific. - Remove description from dmas, reg, power-domains. - Remove a limit of 2 from #address-cells and #size-cells. - Fix add ^ to csi-bridge subnode regex. - Make ranges mandatory. - Add unit address in example. - Add a reference to cdns,csi2rx in csi-bridge subnode. - Expand the example to include the csi-bridge subnode as well. - Re-order subject prefixes. .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 102 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml