diff mbox series

[4/4] rcar-csi2: Do not try to recover after transfer error

Message ID 20211108160220.767586-5-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State New, archived
Headers show
Series media: videobuf2: Add a transfer error event | expand

Commit Message

Niklas Söderlund Nov. 8, 2021, 4:02 p.m. UTC 
Instead of restarting the R-Car CSI-2 receiver if a transmission error
is detected, inform the R-Car VIN driver of the error so it can stop the
whole pipeline and inform user-space. This is done to reflect a updated
usage recommendation in later versions of the datasheet.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
* Changes since v3
- Switch to new V4L2_EVENT_XFER_ERROR from V4L2_EVENT_EOS.
- Disable error interrupts after the first one to not spam the error
  event.

* Changes since v2
- Update spelling in commit message.
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 11848d0c4a55cb4c..427c236243a03ec2 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -902,21 +902,22 @@  static irqreturn_t rcsi2_irq(int irq, void *data)
 
 	rcsi2_write(priv, INTERRSTATE_REG, err_status);
 
-	dev_info(priv->dev, "Transfer error, restarting CSI-2 receiver\n");
-
 	return IRQ_WAKE_THREAD;
 }
 
 static irqreturn_t rcsi2_irq_thread(int irq, void *data)
 {
 	struct rcar_csi2 *priv = data;
+	struct v4l2_event event = {
+		.type = V4L2_EVENT_XFER_ERROR,
+	};
 
-	mutex_lock(&priv->lock);
-	rcsi2_stop(priv);
-	usleep_range(1000, 2000);
-	if (rcsi2_start(priv))
-		dev_warn(priv->dev, "Failed to restart CSI-2 receiver\n");
-	mutex_unlock(&priv->lock);
+	/* Disable further interrupts to not spam the transfer error event. */
+	rcsi2_write(priv, INTEN_REG, 0);
+
+	dev_err(priv->dev, "Transfer error detected.\n");
+
+	v4l2_subdev_notify_event(&priv->subdev, &event);
 
 	return IRQ_HANDLED;
 }