From patchwork Sat Feb 5 18:53:34 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12736189 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1B32EC4332F for ; Sat, 5 Feb 2022 18:55:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1344394AbiBESzU (ORCPT ); Sat, 5 Feb 2022 13:55:20 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46030 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1381156AbiBESzC (ORCPT ); Sat, 5 Feb 2022 13:55:02 -0500 Received: from relay10.mail.gandi.net (relay10.mail.gandi.net [IPv6:2001:4b98:dc4:8::230]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2A418C0401C1 for ; Sat, 5 Feb 2022 10:55:00 -0800 (PST) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 662CF240005; Sat, 5 Feb 2022 18:54:57 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1644087298; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=iNMjeTSTYJWtCgqk4JWldVwNxl2M8W9yqqfxH9Lo+PQ=; b=O6brv+0gz71Bgj5FaCTMMxjJldoA7zvtEHZTLzMWrTISdZJAe2zfowEfg4BAZyUTnEvMq0 u8rWCZsPR+lyp71wgYxAyo7/6BX9O+IxWzXTmU0dfoyR16JC+EpVn+dnG5BKmO7CuLtUTH QDtyTvlqp/QSfri7vBfm2F+zsKEnK6pRUhfqnI25alRK9eNMqTAFYSvgUcsN9/r6FC0C7J zQCw/SJXdO8iPWEWWUnImI3wPK/9qHZYfgXCf9Y1rnCAGcXaiEXC+1gRj8LMX5jacHXl7m o522xb/Znw7YQggjOUvpt6cGh1Zv5NnoHWIziwB/Cux5j6drbbhc8gGLk5iXKQ== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org, linux-clk@vger.kernel.org, linux-staging@lists.linux.dev Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Maxime Ripard , Sakari Ailus , Hans Verkuil , Chen-Yu Tsai , Jernej Skrabec , Paul Kocialkowski , Greg Kroah-Hartman , Helen Koike , Laurent Pinchart , Thomas Petazzoni Subject: [PATCH v2 11/66] ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support Date: Sat, 5 Feb 2022 19:53:34 +0100 Message-Id: <20220205185429.2278860-12-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220205185429.2278860-1-paul.kocialkowski@bootlin.com> References: <20220205185429.2278860-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org MIPI CSI-2 is supported on the V3s with an A31-based MIPI CSI-2 bridge controller. The controller uses a separate D-PHY, which is the same that is otherwise used for MIPI DSI, but used in Rx mode. On the V3s, the CSI0 controller is dedicated to MIPI CSI-2 as it does not have access to any parallel interface pins. Add all the necessary nodes (CSI0, MIPI CSI-2 bridge and D-PHY) to support the MIPI CSI-2 interface. Note that a fwnode graph link is created between CSI0 and MIPI CSI-2 even when no sensor is connected. This will result in a probe failure for the controller as long as no sensor is connected but this is fine since no other interface is available. While the interconnects property is used to inherit the proper dma ranges, the associated index for the cell is set to 0 since no particular meaning is attached to it. This might need to be changed later on (when identifying a proper mbus channel becomes relevant, e.g. for things like QoS). Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/sun8i-v3s.dtsi | 71 ++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 1b3048b6f197..f5f7dfec49f9 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -614,6 +614,77 @@ gic: interrupt-controller@1c81000 { interrupts = ; }; + csi0: camera@1cb0000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + interconnects = <&mbus 0>; + interconnect-names = "dma-mem"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi0_in_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_out_csi0>; + }; + }; + }; + }; + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + phys = <&dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + + dphy: d-phy@1cb2000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01cb2000 0x1000>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_MIPI_CSI>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + allwinner,direction = "rx"; + status = "disabled"; + #phy-cells = <0>; + }; + csi1: camera@1cb4000 { compatible = "allwinner,sun8i-v3s-csi"; reg = <0x01cb4000 0x3000>;