| Message ID | 20230105140307.272052-9-tomi.valkeinen@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | i2c-atr and FPDLink | expand |
Hi Tomi, Thank you for the patch. I won't repeat here the comments made on 7/8 that also apply to this patch. On Thu, Jan 05, 2023 at 04:03:07PM +0200, Tomi Valkeinen wrote: > Add driver for TI DS90UB953 FPD-Link III Serializer. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> > --- > drivers/media/i2c/Kconfig | 13 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/ds90ub953.c | 1590 +++++++++++++++++++++++++++++++++ > 3 files changed, 1604 insertions(+) > create mode 100644 drivers/media/i2c/ds90ub953.c > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index eb312d6e9cf6..29594c724307 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -1614,6 +1614,19 @@ config VIDEO_DS90UB913 > Device driver for the Texas Instruments DS90UB913 > FPD-Link III Serializer. > > +config VIDEO_DS90UB953 > + tristate "TI DS90UB953 Serializer" I'd mention the DS90UB971 too. > + depends on OF && I2C && VIDEO_DEV > + select MEDIA_CONTROLLER > + select VIDEO_V4L2_SUBDEV_API > + select V4L2_FWNODE > + select REGMAP_I2C > + select OF_GPIO > + select I2C_ATR > + help > + Device driver for the Texas Instruments DS90UB953 > + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. > + > config VIDEO_DS90UB960 > tristate "TI DS90UB960 Deserializer" > depends on OF && I2C && VIDEO_DEV > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index c4875ec8c3b9..efd5f717a5f7 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -143,4 +143,5 @@ obj-$(CONFIG_VIDEO_VS6624) += vs6624.o > obj-$(CONFIG_VIDEO_WM8739) += wm8739.o > obj-$(CONFIG_VIDEO_WM8775) += wm8775.o > obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o > +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o > obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o > diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c > new file mode 100644 > index 000000000000..251dc8e8adfa > --- /dev/null > +++ b/drivers/media/i2c/ds90ub953.c > @@ -0,0 +1,1590 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for the Texas Instruments DS90UB953 video serializer > + * > + * Based on a driver from Luca Ceresoli <luca@lucaceresoli.net> > + * > + * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net> > + * Copyright (c) 2022 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/gpio/driver.h> > +#include <linux/i2c-atr.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/math64.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_graph.h> > +#include <linux/rational.h> > +#include <linux/regmap.h> > + > +#include <media/i2c/ds90ub9xx.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-event.h> > +#include <media/v4l2-subdev.h> > + > +#define UB953_PAD_SINK 0 > +#define UB953_PAD_SOURCE 1 > + > +#define UB953_NUM_GPIOS 4 > + > +#define UB953_REG_RESET_CTL 0x01 > +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) > +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) > + > +#define UB953_REG_GENERAL_CFG 0x02 > +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) > +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 > +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) > +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) > +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) > + > +#define UB953_REG_MODE_SEL 0x03 > +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) > +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) > +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) > + > +#define UB953_REG_CLKOUT_CTRL0 0x06 > +#define UB953_REG_CLKOUT_CTRL1 0x07 > + > +#define UB953_REG_SCL_HIGH_TIME 0x0B > +#define UB953_REG_SCL_LOW_TIME 0x0C > + > +#define UB953_REG_LOCAL_GPIO_DATA 0x0d > +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) > +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) > + > +#define UB953_REG_GPIO_INPUT_CTRL 0x0e > +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) > +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) > + > +#define UB953_REG_REV_MASK_ID 0x50 > +#define UB953_REG_GENERAL_STATUS 0x52 > + > +#define UB953_REG_GPIO_PIN_STS 0x53 > +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) > + > +#define UB953_REG_BIST_ERR_CNT 0x54 > +#define UB953_REG_CRC_ERR_CNT1 0x55 > +#define UB953_REG_CRC_ERR_CNT2 0x56 > + > +#define UB953_REG_CSI_ERR_CNT 0x5c > +#define UB953_REG_CSI_ERR_STATUS 0x5D > +#define UB953_REG_CSI_ERR_DLANE01 0x5E > +#define UB953_REG_CSI_ERR_DLANE23 0x5F > +#define UB953_REG_CSI_ERR_CLK_LANE 0x60 > +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 > +#define UB953_REG_PKT_HDR_WC_LSB 0x62 > +#define UB953_REG_PKT_HDR_WC_MSB 0x63 > +#define UB953_REG_CSI_ECC 0x64 > + > +#define UB953_REG_IND_ACC_CTL 0xb0 > +#define UB953_REG_IND_ACC_ADDR 0xb1 > +#define UB953_REG_IND_ACC_DATA 0xb2 > + > +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) > + > +/* Indirect register blocks */ > +#define UB953_IND_TARGET_PAT_GEN 0x00 > +#define UB953_IND_TARGET_FPD3_TX 0x01 > +#define UB953_IND_TARGET_DIE_ID 0x02 > + > +#define UB953_IND_PGEN_CTL 0x01 > +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) > +#define UB953_IND_PGEN_CFG 0x02 > +#define UB953_IND_PGEN_CSI_DI 0x03 > +#define UB953_IND_PGEN_LINE_SIZE1 0x04 > +#define UB953_IND_PGEN_LINE_SIZE0 0x05 > +#define UB953_IND_PGEN_BAR_SIZE1 0x06 > +#define UB953_IND_PGEN_BAR_SIZE0 0x07 > +#define UB953_IND_PGEN_ACT_LPF1 0x08 > +#define UB953_IND_PGEN_ACT_LPF0 0x09 > +#define UB953_IND_PGEN_TOT_LPF1 0x0A > +#define UB953_IND_PGEN_TOT_LPF0 0x0B > +#define UB953_IND_PGEN_LINE_PD1 0x0C > +#define UB953_IND_PGEN_LINE_PD0 0x0D > +#define UB953_IND_PGEN_VBP 0x0E > +#define UB953_IND_PGEN_VFP 0x0F > +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ > + > +/* Note: Only sync mode supported for now */ > +enum ub953_mode { > + /* FPD-Link III CSI-2 synchronous mode */ > + UB953_MODE_SYNC, > + /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */ > + UB953_MODE_NONSYNC_EXT, > + /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */ > + UB953_MODE_NONSYNC_INT, > + /* FPD-Link III DVP mode */ > + UB953_MODE_DVP, > +}; > + > +struct ub953_hw_data { > + const char *model; > + bool ub971; Maybe is_ub971, although a model enum could be nicer. Up to you. > +}; > + > +struct ub953_data { > + const struct ub953_hw_data *hw_data; > + > + struct i2c_client *client; > + struct regmap *regmap; > + > + u32 num_data_lanes; > + > + struct gpio_chip gpio_chip; > + char gpio_chip_name[64]; > + > + struct v4l2_subdev sd; > + struct media_pad pads[2]; > + > + struct v4l2_async_notifier notifier; > + > + struct v4l2_subdev *source_sd; > + > + struct v4l2_ctrl_handler ctrl_handler; > + > + u64 enabled_source_streams; > + > + struct device_node *tx_ep_np; > + > + /* lock for register access */ > + struct mutex reg_lock; Why is this needed, can you access registers from multiple contexts ? > + > + u8 current_indirect_target; > + > + struct clk_hw clkout_clk_hw; > + > + enum ub953_mode mode; > + > + struct ds90ub9xx_platform_data *plat_data; > +}; > + > +static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd) > +{ > + return container_of(sd, struct ub953_data, sd); > +} > + > +/* > + * HW Access > + */ > + > +static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) > +{ > + unsigned int v; > + int ret; > + > + mutex_lock(&priv->reg_lock); > + > + ret = regmap_read(priv->regmap, reg, &v); > + if (ret) > + dev_err(&priv->client->dev, > + "Cannot read register 0x%02x: %d!\n", reg, ret); > + else > + *val = v; > + > + mutex_unlock(&priv->reg_lock); > + > + return ret; > +} > + > +static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) > +{ > + int ret; > + > + mutex_lock(&priv->reg_lock); > + > + ret = regmap_write(priv->regmap, reg, val); > + if (ret) > + dev_err(&priv->client->dev, > + "Cannot write register 0x%02x: %d!\n", reg, ret); > + > + mutex_unlock(&priv->reg_lock); > + > + return ret; > +} > + > +static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) > +{ > + struct device *dev = &priv->client->dev; > + int ret; > + > + if (priv->current_indirect_target == block) > + return 0; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); > + if (ret) { > + dev_err(dev, "%s: cannot select indirect target %u (%d)!\n", > + __func__, block, ret); > + return ret; > + } > + > + priv->current_indirect_target = block; > + > + return 0; > +} > + > +__maybe_unused Looks like it's more than maybe unused, it's never used at all. Can the function be dropped ? > +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) > +{ > + unsigned int v; > + int ret; > + > + mutex_lock(&priv->reg_lock); > + > + ret = _ub953_select_ind_reg_block(priv, block); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); > + if (ret) > + goto out; > + > + ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); > + if (ret) > + goto out; > + > + *val = v; > + > +out: > + mutex_unlock(&priv->reg_lock); > + > + return ret; > +} > + > +static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) > +{ > + int ret; > + > + mutex_lock(&priv->reg_lock); > + > + ret = _ub953_select_ind_reg_block(priv, block); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); > + > +out: > + mutex_unlock(&priv->reg_lock); > + An error message would be useful on failure. Same in the next function. > + return ret; > +} > + > +static int ub953_write_ind16(struct ub953_data *priv, u8 block, u8 reg, u16 val) > +{ > + int ret; > + > + mutex_lock(&priv->reg_lock); > + > + ret = _ub953_select_ind_reg_block(priv, block); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val >> 8); > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg + 1); There's no auto-increment ? :-( > + if (ret) > + goto out; > + > + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val & 0xff); > + if (ret) > + goto out; > + > +out: > + mutex_unlock(&priv->reg_lock); > + > + return ret; > +} > + > +/* > + * GPIO chip > + */ > +static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) > +{ > + struct ub953_data *priv = gpiochip_get_data(gc); > + int ret; > + u8 v; > + > + ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v); > + if (ret) > + return ret; > + > + if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)) > + return GPIO_LINE_DIRECTION_IN; > + else > + return GPIO_LINE_DIRECTION_OUT; > +} > + > +static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) > +{ > + struct ub953_data *priv = gpiochip_get_data(gc); > + > + return regmap_update_bits( > + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, > + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | > + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), > + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); > +} > + > +static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, > + int value) > +{ > + struct ub953_data *priv = gpiochip_get_data(gc); > + int ret; > + > + ret = regmap_update_bits( > + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, > + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), > + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); > + > + if (ret) > + return ret; > + > + return regmap_update_bits( > + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, > + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | > + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), > + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); > +} > + > +static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) > +{ > + struct ub953_data *priv = gpiochip_get_data(gc); > + int ret; > + u8 v; > + > + ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v); > + if (ret) > + return ret; > + > + return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); > +} > + > +static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) > +{ > + struct ub953_data *priv = gpiochip_get_data(gc); > + > + regmap_update_bits( > + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, > + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), > + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); > +} > + > +static int ub953_gpio_of_xlate(struct gpio_chip *gc, > + const struct of_phandle_args *gpiospec, > + u32 *flags) > +{ > + if (flags) > + *flags = gpiospec->args[1]; > + > + return gpiospec->args[0]; > +} > + > +static int ub953_gpiochip_probe(struct ub953_data *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct gpio_chip *gc = &priv->gpio_chip; > + int ret; > + > + /* Set all GPIOs to local input mode */ > + ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); > + ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); > + > + scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", > + dev_name(dev)); > + > + gc->label = priv->gpio_chip_name; > + gc->parent = dev; > + gc->owner = THIS_MODULE; > + gc->base = -1; > + gc->can_sleep = 1; > + gc->ngpio = UB953_NUM_GPIOS; > + gc->get_direction = ub953_gpio_get_direction; > + gc->direction_input = ub953_gpio_direction_in; > + gc->direction_output = ub953_gpio_direction_out; > + gc->get = ub953_gpio_get; > + gc->set = ub953_gpio_set; > + gc->of_xlate = ub953_gpio_of_xlate; > + gc->of_node = priv->client->dev.of_node; > + gc->of_gpio_n_cells = 2; > + > + ret = gpiochip_add_data(gc, priv); > + if (ret) { > + dev_err(dev, "Failed to add GPIOs: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static void ub953_gpiochip_remove(struct ub953_data *priv) > +{ > + gpiochip_remove(&priv->gpio_chip); > +} > + > +/* > + * V4L2 > + */ > + > +static int _ub953_set_routing(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, > + struct v4l2_subdev_krouting *routing) > +{ > + static const struct v4l2_mbus_framefmt format = { > + .width = 640, > + .height = 480, > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > + .field = V4L2_FIELD_NONE, > + .colorspace = V4L2_COLORSPACE_SRGB, > + .ycbcr_enc = V4L2_YCBCR_ENC_601, > + .quantization = V4L2_QUANTIZATION_LIM_RANGE, > + .xfer_func = V4L2_XFER_FUNC_SRGB, > + }; > + int ret; > + > + /* > + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until > + * frame desc is made dynamically allocated. > + */ > + > + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) > + return -EINVAL; > + > + ret = v4l2_subdev_routing_validate(sd, routing, > + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); > + if (ret) > + return ret; > + > + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static int ub953_set_routing(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, > + enum v4l2_subdev_format_whence which, > + struct v4l2_subdev_krouting *routing) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + > + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) > + return -EBUSY; > + > + return _ub953_set_routing(sd, state, routing); > +} > + > +static int ub953_get_source_frame_desc(struct ub953_data *priv, > + struct v4l2_mbus_frame_desc *desc) > +{ > + struct media_pad *pad; > + int ret; > + > + pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); > + if (!pad) > + return -EPIPE; > + > + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, > + desc); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, > + struct v4l2_mbus_frame_desc *fd) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + const struct v4l2_subdev_krouting *routing; > + struct v4l2_mbus_frame_desc source_fd; > + struct v4l2_subdev_route *route; > + struct v4l2_subdev_state *state; > + int ret; > + > + if (pad != UB953_PAD_SOURCE) > + return -EINVAL; > + > + ret = ub953_get_source_frame_desc(priv, &source_fd); > + if (ret) > + return ret; > + > + state = v4l2_subdev_lock_and_get_active_state(sd); > + > + routing = &state->routing; > + > + memset(fd, 0, sizeof(*fd)); > + > + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; > + > + for_each_active_route(routing, route) { > + struct v4l2_mbus_frame_desc_entry *source_entry = NULL; > + unsigned int i; > + > + if (route->source_pad != pad) > + continue; > + > + for (i = 0; i < source_fd.num_entries; ++i) > + if (source_fd.entry[i].stream == route->sink_stream) { > + source_entry = &source_fd.entry[i]; > + break; > + } > + > + if (!source_entry) { > + dev_err(&priv->client->dev, > + "Failed to find stream from source frame desc\n"); > + ret = -EPIPE; > + goto out; > + } > + > + fd->entry[fd->num_entries].stream = route->source_stream; > + fd->entry[fd->num_entries].flags = source_entry->flags; > + fd->entry[fd->num_entries].length = source_entry->length; > + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; > + fd->entry[fd->num_entries].bus.csi2.vc = > + source_entry->bus.csi2.vc; > + fd->entry[fd->num_entries].bus.csi2.dt = > + source_entry->bus.csi2.dt; > + > + fd->num_entries++; > + } > + > +out: > + v4l2_subdev_unlock_state(state); > + > + return ret; > +} > + > +static int ub953_set_fmt(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, > + struct v4l2_subdev_format *format) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + struct v4l2_mbus_framefmt *fmt; > + > + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && > + priv->enabled_source_streams) > + return -EBUSY; > + > + /* No transcoding, source and sink formats must match. */ > + if (format->pad == UB953_PAD_SOURCE) > + return v4l2_subdev_get_fmt(sd, state, format); > + > + /* Set sink format */ > + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, > + format->stream); > + if (!fmt) > + return -EINVAL; > + > + *fmt = format->format; > + > + /* Propagate to source format */ > + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, > + format->stream); > + if (!fmt) > + return -EINVAL; > + > + *fmt = format->format; > + > + return 0; > +} > + > +static int ub953_init_cfg(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state) > +{ > + struct v4l2_subdev_route routes[] = { > + { > + .sink_pad = UB953_PAD_SINK, > + .sink_stream = 0, > + .source_pad = UB953_PAD_SOURCE, > + .source_stream = 0, > + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, > + }, > + }; > + > + struct v4l2_subdev_krouting routing = { > + .num_routes = ARRAY_SIZE(routes), > + .routes = routes, > + }; > + > + return _ub953_set_routing(sd, state, &routing); > +} > + > +static int ub953_log_status(struct v4l2_subdev *sd) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + struct device *dev = &priv->client->dev; > + u8 v = 0, v1 = 0, v2 = 0; > + unsigned int i; > + char id[7]; > + u8 gpio_local_data; > + u8 gpio_input_ctrl; > + u8 gpio_pin_sts; > + > + for (i = 0; i < 6; ++i) > + ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); > + id[6] = 0; > + > + dev_info(dev, "ID '%s'\n", id); > + > + ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); > + dev_info(dev, "GENERAL_STATUS %#x\n", v); > + > + ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); > + ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); > + dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); > + > + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); > + dev_info(dev, "CSI error count %u\n", v); > + > + ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); > + dev_info(dev, "CSI_ERR_STATUS %#x\n", v); > + > + ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); > + dev_info(dev, "CSI_ERR_DLANE01 %#x\n", v); > + > + ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); > + dev_info(dev, "CSI_ERR_DLANE23 %#x\n", v); > + > + ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); > + dev_info(dev, "CSI_ERR_CLK_LANE %#x\n", v); > + > + ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); > + dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); > + > + ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1); > + ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2); > + dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); > + > + ub953_read(priv, UB953_REG_CSI_ECC, &v); > + dev_info(dev, "CSI ECC %#x\n", v); > + > + ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); > + ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); > + ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); > + > + for (i = 0; i < UB953_NUM_GPIOS; ++i) { > + dev_info(dev, > + "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", > + i, > + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)), > + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)), > + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)), > + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)), > + !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i))); > + } > + > + return 0; > +} > + > +static int ub953_enable_streams(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, u32 pad, > + u64 streams_mask) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + struct media_pad *remote_pad; > + u64 sink_streams; > + int ret; > + > + if (streams_mask & priv->enabled_source_streams) > + return -EALREADY; > + > + sink_streams = v4l2_subdev_state_xlate_streams( > + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); > + > + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); > + > + ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, > + sink_streams); > + if (ret) > + return ret; > + > + priv->enabled_source_streams |= streams_mask; > + > + return 0; > +} > + > +static int ub953_disable_streams(struct v4l2_subdev *sd, > + struct v4l2_subdev_state *state, u32 pad, > + u64 streams_mask) > +{ > + struct ub953_data *priv = sd_to_ub953(sd); > + struct media_pad *remote_pad; > + int ret; > + u64 sink_streams; > + > + if ((streams_mask & priv->enabled_source_streams) != streams_mask) > + return -EALREADY; > + > + sink_streams = v4l2_subdev_state_xlate_streams( > + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); > + > + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); > + > + ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, > + sink_streams); > + if (ret) > + return ret; > + > + priv->enabled_source_streams &= ~streams_mask; > + > + return 0; > +} > + > +static const struct v4l2_subdev_pad_ops ub953_pad_ops = { > + .enable_streams = ub953_enable_streams, > + .disable_streams = ub953_disable_streams, > + .set_routing = ub953_set_routing, > + .get_frame_desc = ub953_get_frame_desc, > + .get_fmt = v4l2_subdev_get_fmt, > + .set_fmt = ub953_set_fmt, > + .init_cfg = ub953_init_cfg, > +}; > + > +static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { > + .log_status = ub953_log_status, > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, Align the = for all structures or for none. > +}; > + > +static const struct v4l2_subdev_ops ub953_subdev_ops = { > + .core = &ub953_subdev_core_ops, > + .pad = &ub953_pad_ops, > +}; > + > +static const struct media_entity_operations ub953_entity_ops = { > + .link_validate = v4l2_subdev_link_validate, > +}; > + > +enum { > + TEST_PATTERN_DISABLED = 0, > + TEST_PATTERN_V_COLOR_BARS_1, > + TEST_PATTERN_V_COLOR_BARS_2, > + TEST_PATTERN_V_COLOR_BARS_4, > + TEST_PATTERN_V_COLOR_BARS_8, > +}; > + > +static const char *const ub953_tpg_qmenu[] = { > + "Disabled", > + "1 vertical color bar", > + "2 vertical color bars", > + "4 vertical color bars", > + "8 vertical color bars", > +}; > + > +static int ub953_enable_tpg(struct ub953_data *priv, int tpg_num) > +{ > + struct v4l2_subdev *sd = &priv->sd; > + struct v4l2_subdev_state *state; > + struct v4l2_mbus_framefmt *fmt; > + u8 vbp, vfp; > + u16 blank_lines; > + u16 width; > + u16 height; > + > + u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ > + u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; > + u8 num_cbars = 1 << cbars_idx; > + > + u16 line_size; /* Line size [bytes] */ > + u16 bar_size; /* cbar size [bytes] */ > + u16 act_lpf; /* active lines/frame */ > + u16 tot_lpf; /* tot lines/frame */ > + u16 line_pd; /* Line period in 10-ns units */ > + > + u16 fps = 30; > + > + vbp = 33; > + vfp = 10; > + blank_lines = vbp + vfp + 2; /* total blanking lines */ > + > + state = v4l2_subdev_get_locked_active_state(sd); > + > + if (state->routing.num_routes != 1) > + return -EINVAL; > + > + fmt = v4l2_subdev_state_get_stream_format(state, UB953_PAD_SOURCE, 0); > + if (!fmt) > + return -EINVAL; > + > + if (fmt->code != MEDIA_BUS_FMT_UYVY8_1X16) > + return -EINVAL; > + > + width = fmt->width; > + height = fmt->height; > + > + line_size = width * bytespp; > + bar_size = line_size / num_cbars; > + act_lpf = height; > + tot_lpf = act_lpf + blank_lines; > + line_pd = 100000000 / fps / tot_lpf; > + > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, > + UB953_IND_PGEN_CTL_PGEN_ENABLE); > + > + /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CFG, > + cbars_idx << 4 | 0x2); > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CSI_DI, > + 0x1e); > + > + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, > + UB953_IND_PGEN_LINE_SIZE1, line_size); > + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, > + UB953_IND_PGEN_BAR_SIZE1, bar_size); > + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, > + UB953_IND_PGEN_ACT_LPF1, act_lpf); > + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, > + UB953_IND_PGEN_TOT_LPF1, tot_lpf); > + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, > + UB953_IND_PGEN_LINE_PD1, line_pd); > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VBP, > + vbp); > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VFP, > + vfp); > + > + return 0; > +} > + > +static void ub953_disable_tpg(struct ub953_data *priv) > +{ > + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, > + 0x0); > +} > + > +static int ub953_s_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct ub953_data *priv = > + container_of(ctrl->handler, struct ub953_data, ctrl_handler); > + int ret = 0; > + > + switch (ctrl->id) { > + case V4L2_CID_TEST_PATTERN: > + if (ctrl->val == 0) > + ub953_disable_tpg(priv); > + else > + ret = ub953_enable_tpg(priv, ctrl->val); > + break; > + } > + > + return ret; > +} > + > +static const struct v4l2_ctrl_ops ub953_ctrl_ops = { > + .s_ctrl = ub953_s_ctrl, > +}; > + > +static int ub953_notify_bound(struct v4l2_async_notifier *notifier, > + struct v4l2_subdev *source_subdev, > + struct v4l2_async_subdev *asd) > +{ > + struct ub953_data *priv = sd_to_ub953(notifier->sd); > + struct device *dev = &priv->client->dev; > + unsigned int src_pad; > + int ret; > + > + ret = media_entity_get_fwnode_pad(&source_subdev->entity, > + source_subdev->fwnode, > + MEDIA_PAD_FL_SOURCE); > + if (ret < 0) { > + dev_err(dev, "Failed to find pad for %s\n", > + source_subdev->name); > + return ret; > + } > + > + priv->source_sd = source_subdev; > + src_pad = ret; > + > + ret = media_create_pad_link( > + &source_subdev->entity, src_pad, &priv->sd.entity, 0, > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); > + if (ret) { > + dev_err(dev, "Unable to link %s:%u -> %s:0\n", > + source_subdev->name, src_pad, priv->sd.name); > + return ret; > + } > + > + return 0; > +} > + > +static const struct v4l2_async_notifier_operations ub953_notify_ops = { > + .bound = ub953_notify_bound, > +}; > + > +static int ub953_v4l2_notifier_register(struct ub953_data *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct v4l2_async_subdev *asd; > + struct device_node *ep_node; > + int ret; > + > + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); s/0, 0/UB953_PAD_SINK, 0/ Similar comment for other calls to this function below. > + if (!ep_node) { > + dev_err(dev, "No graph endpoint\n"); > + return -ENODEV; > + } > + > + v4l2_async_nf_init(&priv->notifier); > + > + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, > + of_fwnode_handle(ep_node), > + struct v4l2_async_subdev); > + > + of_node_put(ep_node); > + > + if (IS_ERR(asd)) { > + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); > + v4l2_async_nf_cleanup(&priv->notifier); > + return PTR_ERR(asd); > + } > + > + priv->notifier.ops = &ub953_notify_ops; > + > + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); > + if (ret) { > + dev_err(dev, "Failed to register subdev_notifier"); > + v4l2_async_nf_cleanup(&priv->notifier); > + return ret; > + } > + > + return 0; > +} > + > +static void ub953_v4l2_notifier_unregister(struct ub953_data *priv) > +{ > + v4l2_async_nf_unregister(&priv->notifier); > + v4l2_async_nf_cleanup(&priv->notifier); > +} > + > +/* > + * Probing > + */ > + > +static int ub953_i2c_master_init(struct ub953_data *priv) > +{ > + /* i2c fast mode */ > + u32 ref = 26250000; > + u32 scl_high = 915; /* ns */ > + u32 scl_low = 1641; /* ns */ > + int ret; > + > + scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5; > + scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5; > + > + ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high); > + if (ret) > + return ret; > + > + ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static u64 ub953_get_fc_rate(struct ub953_data *priv) > +{ > + if (priv->hw_data->ub971) { > + switch (priv->mode) { > + case UB953_MODE_SYNC: > + return priv->plat_data->bc_rate * 160ull; > + default: > + /* Not supported */ > + return 0; > + } > + } else { > + switch (priv->mode) { > + case UB953_MODE_SYNC: > + return priv->plat_data->bc_rate / 2 * 160ull; > + default: > + /* Not supported */ > + return 0; > + } > + } This could be simplified to if (priv->mode != UB953_MODE_SYNC) /* Not supported */ return 0; if (priv->hw_data->ub971) return priv->plat_data->bc_rate * 160ull; else return priv->plat_data->bc_rate / 2 * 160ull; > +} > + > +static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, > + unsigned long target, u64 fc, > + u8 *hs_div, u8 *m, u8 *n) > +{ > + /* > + * We always use 4 as a pre-divider (HS_CLK_DIV = 2). > + * > + * According to the datasheet: > + * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)." > + * - "if it is not possible to have an integer ratio of N/M, it is best to > + * select a smaller value for HS_CLK_DIV. > + * > + * For above reasons the default HS_CLK_DIV seems the best in the average > + * case. Use always that value to keep the code simple. > + */ > + static const unsigned long hs_clk_div = 4; > + > + u64 fc_divided; > + unsigned long mul, div; > + unsigned long res; > + > + /* clkout = fc / hs_clk_div * m / n */ > + > + fc_divided = div_u64(fc, hs_clk_div); > + > + rational_best_approximation(target, fc_divided, (1 << 5) - 1, > + (1 << 8) - 1, &mul, &div); > + > + res = div_u64(fc_divided * mul, div); > + > + *hs_div = hs_clk_div; > + *m = mul; > + *n = div; > + > + return res; > +} > + > +static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv, > + unsigned long target, u64 fc, > + u8 *m, u8 *n) > +{ > + u64 fc_divided; > + unsigned long mul, div; > + unsigned long res; > + > + /* clkout = fc * m / (8 * n) */ > + > + fc_divided = div_u64(fc, 8); > + > + rational_best_approximation(target, fc_divided, (1 << 5) - 1, > + (1 << 8) - 1, &mul, &div); > + > + res = div_u64(fc_divided * mul, div); > + > + *m = mul; > + *n = div; > + > + return res; > +} > + > +static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); > + struct device *dev = &priv->client->dev; > + u8 ctrl0, ctrl1; > + u32 mul, div; > + u64 fc_rate; > + u32 hs_clk_div; > + u64 rate; > + int ret; > + > + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0); > + if (ret) { > + dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret); > + return 0; > + } > + > + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1); > + if (ret) { > + dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret); > + return 0; > + } > + > + fc_rate = ub953_get_fc_rate(priv); > + > + if (priv->hw_data->ub971) { > + mul = ctrl0 & 0x1f; > + div = ctrl1; > + > + if (div == 0) > + return 0; > + > + rate = div_u64(fc_rate * mul, 8 * div); > + > + dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n", > + fc_rate, mul, div, rate); > + } else { > + mul = ctrl0 & 0x1f; > + hs_clk_div = 1 << (ctrl0 >> 5); > + div = ctrl1; > + > + if (div == 0) > + return 0; > + > + rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div); > + > + dev_dbg(dev, > + "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n", > + fc_rate, hs_clk_div, mul, div, rate); > + } > + > + return rate; > +} > + > +static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *parent_rate) > +{ > + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); > + struct device *dev = &priv->client->dev; > + unsigned long res; > + u64 fc_rate; > + u8 hs_div, m, n; > + > + fc_rate = ub953_get_fc_rate(priv); > + > + if (priv->hw_data->ub971) { > + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); > + > + dev_dbg(dev, > + "%s %llu * %u / (8 * %u) = %lu (requested %lu)", > + __func__, fc_rate, m, n, res, rate); > + } else { > + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); > + > + dev_dbg(dev, > + "%s %llu / %u * %u / %u = %lu (requested %lu)", > + __func__, fc_rate, hs_div, m, n, res, rate); > + } > + > + return res; > +} > + > +static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); > + u64 fc_rate; > + u8 hs_div, m, n; > + unsigned long res; > + > + fc_rate = ub953_get_fc_rate(priv); > + > + if (priv->hw_data->ub971) { > + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); > + > + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); > + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); > + } else { > + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); > + > + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); > + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); > + } > + > + dev_dbg(&priv->client->dev, > + "%s %lu (requested %lu)\n", __func__, res, rate); > + > + return 0; > +} > + > +static const struct clk_ops ub953_clkout_ops = { > + .recalc_rate = ub953_clkout_recalc_rate, > + .round_rate = ub953_clkout_round_rate, > + .set_rate = ub953_clkout_set_rate, > +}; > + > +static void ub953_init_clkout_ub953(struct ub953_data *priv) > +{ > + u64 fc_rate; > + u8 hs_div, m, n; > + > + fc_rate = ub953_get_fc_rate(priv); > + > + ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n); > + > + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); > + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); > +} > + > +static void ub953_init_clkout_ub971(struct ub953_data *priv) > +{ > + u64 fc_rate; > + u8 m, n; > + > + fc_rate = ub953_get_fc_rate(priv); > + > + ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n); > + > + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); > + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); > +} > + > +static int ub953_register_clkout(struct ub953_data *priv) > +{ > + struct device *dev = &priv->client->dev; > + const struct clk_init_data init = { > + .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out", > + priv->hw_data->model, dev_name(dev)), > + .ops = &ub953_clkout_ops, > + }; > + int ret; > + > + /* Initialize clkout to 25MHz by default */ > + if (priv->hw_data->ub971) > + ub953_init_clkout_ub971(priv); > + else > + ub953_init_clkout_ub953(priv); > + > + priv->clkout_clk_hw.init = &init; > + > + ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw); > + kfree(init.name); > + if (ret) > + return dev_err_probe(dev, ret, "Cannot register clock HW\n"); > + > + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, > + &priv->clkout_clk_hw); > + if (ret) > + return dev_err_probe(dev, ret, > + "Cannot add OF clock provider\n"); > + > + return 0; > +} > + > +static int ub953_add_i2c_adapter(struct ub953_data *priv) > +{ > + struct device *dev = &priv->client->dev; > + struct fwnode_handle *i2c_handle; > + int ret; > + > + i2c_handle = device_get_named_child_node(dev, "i2c"); > + if (!i2c_handle) > + return 0; > + > + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, > + i2c_handle); > + > + fwnode_handle_put(i2c_handle); > + > + if (ret) > + return ret; > + > + return 0; > +} > + > +static const struct regmap_config ub953_regmap_config = { > + .name = "ds90ub953", > + .reg_bits = 8, > + .val_bits = 8, > + .reg_format_endian = REGMAP_ENDIAN_DEFAULT, > + .val_format_endian = REGMAP_ENDIAN_DEFAULT, > +}; > + > +static int ub953_parse_dt(struct ub953_data *priv) > +{ > + struct device_node *np = priv->client->dev.of_node; > + struct device *dev = &priv->client->dev; > + struct device_node *ep_np; > + int ret; > + > + if (!np) { > + dev_err(dev, "OF: no device tree node!\n"); > + return -ENOENT; > + } > + > + ep_np = of_graph_get_endpoint_by_regs(np, 0, 0); > + if (!ep_np) { > + dev_err(dev, "OF: no endpoint\n"); > + return -ENOENT; > + } > + > + ret = of_property_count_u32_elems(ep_np, "data-lanes"); > + > + of_node_put(ep_np); > + > + if (ret <= 0) { > + dev_err(dev, "OF: failed to parse data-lanes: %d\n", ret); > + return ret; > + } > + > + if (ret != 1 && ret != 2 && ret != 4) { > + dev_err(dev, "OF: bad number of data-lanes: %d\n", ret); > + return -EINVAL; > + } > + > + priv->num_data_lanes = ret; > + > + return 0; > +} > + > +static int ub953_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct ub953_data *priv; > + int ret; > + u8 v; > + bool mode_override; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->client = client; > + > + priv->hw_data = of_device_get_match_data(dev); > + if (!priv->hw_data) > + return -ENODEV; > + > + priv->plat_data = dev_get_platdata(&client->dev); > + if (!priv->plat_data) { > + dev_err(dev, "Platform data missing\n"); > + return -ENODEV; > + } > + > + mutex_init(&priv->reg_lock); > + > + /* > + * Initialize to invalid values so that the first reg writes will > + * configure the target. > + */ > + priv->current_indirect_target = 0xff; > + > + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); > + if (IS_ERR(priv->regmap)) { > + dev_err(dev, "Failed to init regmap\n"); > + ret = PTR_ERR(priv->regmap); > + goto err_mutex_destroy; > + } > + > + ret = ub953_parse_dt(priv); > + if (ret) > + goto err_mutex_destroy; > + > + ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); > + if (ret) > + goto err_mutex_destroy; > + > + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) { > + dev_err(dev, "Mode value not stabilized\n"); > + ret = -ENODEV; > + goto err_mutex_destroy; > + } > + > + mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; > + > + switch (v & UB953_REG_MODE_SEL_MODE_MASK) { > + case 0: > + priv->mode = UB953_MODE_SYNC; > + break; > + case 2: > + priv->mode = UB953_MODE_NONSYNC_EXT; > + break; > + case 3: > + priv->mode = UB953_MODE_NONSYNC_INT; > + break; > + case 5: > + priv->mode = UB953_MODE_DVP; > + break; > + default: > + dev_err(dev, "Illegal mode in mode register\n"); > + ret = -ENODEV; > + goto err_mutex_destroy; > + } > + > + dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", > + priv->mode); > + > + if (priv->mode != UB953_MODE_SYNC) { > + dev_err(dev, "Only synchronous mode supported\n"); > + ret = -ENODEV; > + goto err_mutex_destroy; > + } > + > + ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); > + if (ret) { > + dev_err(dev, "Failed to read revision: %d", ret); > + goto err_mutex_destroy; > + } > + > + dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); > + > + ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); > + if (ret) > + goto err_mutex_destroy; > + > + dev_dbg(dev, "i2c strap setting %s V\n", > + (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); Please move the hardware checks and initialization to a separate function, probe() is too big. > + > + ret = ub953_i2c_master_init(priv); > + if (ret) { > + dev_err(dev, "i2c init failed: %d\n", ret); > + goto err_mutex_destroy; > + } > + > + ret = ub953_gpiochip_probe(priv); > + if (ret) { > + dev_err(dev, "Failed to init gpiochip\n"); > + goto err_mutex_destroy; > + } > + > + ub953_write(priv, UB953_REG_GENERAL_CFG, > + UB953_REG_GENERAL_CFG_CONT_CLK | > + ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | > + UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); This too. > + > + ret = ub953_register_clkout(priv); > + if (ret) { > + dev_err(dev, "Failed to register clkout\n"); > + goto err_gpiochip_remove; > + } > + > + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); > + > + v4l2_ctrl_handler_init(&priv->ctrl_handler, > + ARRAY_SIZE(ub953_tpg_qmenu) - 1); > + priv->sd.ctrl_handler = &priv->ctrl_handler; > + > + v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub953_ctrl_ops, > + V4L2_CID_TEST_PATTERN, > + ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0, > + ub953_tpg_qmenu); > + > + if (priv->ctrl_handler.error) { > + ret = priv->ctrl_handler.error; > + goto err_gpiochip_remove; > + } > + > + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | > + V4L2_SUBDEV_FL_STREAMS; > + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; > + priv->sd.entity.ops = &ub953_entity_ops; > + > + priv->pads[0].flags = MEDIA_PAD_FL_SINK; > + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; > + > + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); > + if (ret) { > + dev_err(dev, "Failed to init pads\n"); > + goto err_remove_ctrls; > + } > + > + priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); Error handling ? > + priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); > + > + priv->sd.state_lock = priv->sd.ctrl_handler->lock; > + > + ret = v4l2_subdev_init_finalize(&priv->sd); > + if (ret) > + goto err_entity_cleanup; I think I would move subdev init to a separate function too. > + > + ret = ub953_v4l2_notifier_register(priv); > + if (ret) { > + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); > + goto err_free_state; > + } > + > + ret = v4l2_async_register_subdev(&priv->sd); > + if (ret) { > + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); > + goto err_unreg_notif; > + } > + > + ret = ub953_add_i2c_adapter(priv); > + if (ret) { > + dev_err(dev, "failed to add remote i2c adapter\n"); > + goto err_unreg_async_subdev; > + } > + > + return 0; > + > +err_unreg_async_subdev: > + v4l2_async_unregister_subdev(&priv->sd); > +err_unreg_notif: > + ub953_v4l2_notifier_unregister(priv); > +err_free_state: > + v4l2_subdev_cleanup(&priv->sd); > +err_entity_cleanup: > + if (priv->tx_ep_np) > + of_node_put(priv->tx_ep_np); > + > + media_entity_cleanup(&priv->sd.entity); > +err_remove_ctrls: > + v4l2_ctrl_handler_free(&priv->ctrl_handler); > +err_gpiochip_remove: > + ub953_gpiochip_remove(priv); > +err_mutex_destroy: > + mutex_destroy(&priv->reg_lock); > + > + return ret; > +} > + > +static void ub953_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct ub953_data *priv = sd_to_ub953(sd); > + > + i2c_atr_del_adapter(priv->plat_data->atr, > + priv->plat_data->port); > + > + v4l2_async_unregister_subdev(&priv->sd); > + > + ub953_v4l2_notifier_unregister(priv); > + > + v4l2_subdev_cleanup(&priv->sd); > + > + of_node_put(priv->tx_ep_np); > + > + media_entity_cleanup(&priv->sd.entity); > + > + v4l2_ctrl_handler_free(&priv->ctrl_handler); > + > + ub953_gpiochip_remove(priv); > + mutex_destroy(&priv->reg_lock); > +} > + > +static const struct ub953_hw_data ds90ub953_hw = { > + .model = "ub953", > +}; > + > +static const struct ub953_hw_data ds90ub971_hw = { > + .model = "ub971", > + .ub971 = true, > +}; > + > +static const struct i2c_device_id ub953_id[] = { > + { "ds90ub953-q1", 0 }, > + { "ds90ub971-q1", 0 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, ub953_id); > + > +#ifdef CONFIG_OF > +static const struct of_device_id ub953_dt_ids[] = { > + { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, > + { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, ub953_dt_ids); > +#endif > + > +static struct i2c_driver ds90ub953_driver = { > + .probe_new = ub953_probe, > + .remove = ub953_remove, > + .id_table = ub953_id, > + .driver = { > + .name = "ds90ub953", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(ub953_dt_ids), > + }, > +}; > + > +module_i2c_driver(ds90ub953_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("Texas Instruments DS90UB953 serializer driver"); > +MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>"); > +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>"); > +MODULE_IMPORT_NS(I2C_ATR);
On 08/01/2023 06:23, Laurent Pinchart wrote: > Hi Tomi, > > Thank you for the patch. > > I won't repeat here the comments made on 7/8 that also apply to this > patch. Yep. I think I have addressed all of them for UB953 too. I also need to check UB960, I believe many comments can be applied to that driver too. > On Thu, Jan 05, 2023 at 04:03:07PM +0200, Tomi Valkeinen wrote: >> Add driver for TI DS90UB953 FPD-Link III Serializer. >> >> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> >> --- >> drivers/media/i2c/Kconfig | 13 + >> drivers/media/i2c/Makefile | 1 + >> drivers/media/i2c/ds90ub953.c | 1590 +++++++++++++++++++++++++++++++++ >> 3 files changed, 1604 insertions(+) >> create mode 100644 drivers/media/i2c/ds90ub953.c >> >> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig >> index eb312d6e9cf6..29594c724307 100644 >> --- a/drivers/media/i2c/Kconfig >> +++ b/drivers/media/i2c/Kconfig >> @@ -1614,6 +1614,19 @@ config VIDEO_DS90UB913 >> Device driver for the Texas Instruments DS90UB913 >> FPD-Link III Serializer. >> >> +config VIDEO_DS90UB953 >> + tristate "TI DS90UB953 Serializer" > > I'd mention the DS90UB971 too. I thought about it, but... How many model numbers will we add to this string? Unfortunately I don't have any kind of "family" name for these chips. I could perhaps call them "TI FPD-Link CSI-2 Serializers", but we could as well get another CSI-2 serializer which doesn't quite fit into the same driver. But perhaps that's a problem for the future. Are you fine with "TI FPD-Link III/IV CSI-2 Serializers"? I could name the UB960 and UB913 drivers similarly. I'll perhaps still keep CONFIG_VIDEO_DS90UB953, though. >> + depends on OF && I2C && VIDEO_DEV >> + select MEDIA_CONTROLLER >> + select VIDEO_V4L2_SUBDEV_API >> + select V4L2_FWNODE >> + select REGMAP_I2C >> + select OF_GPIO >> + select I2C_ATR >> + help >> + Device driver for the Texas Instruments DS90UB953 >> + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. >> + >> config VIDEO_DS90UB960 >> tristate "TI DS90UB960 Deserializer" >> depends on OF && I2C && VIDEO_DEV >> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile >> index c4875ec8c3b9..efd5f717a5f7 100644 >> --- a/drivers/media/i2c/Makefile >> +++ b/drivers/media/i2c/Makefile >> @@ -143,4 +143,5 @@ obj-$(CONFIG_VIDEO_VS6624) += vs6624.o >> obj-$(CONFIG_VIDEO_WM8739) += wm8739.o >> obj-$(CONFIG_VIDEO_WM8775) += wm8775.o >> obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o >> +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o >> obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o >> diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c >> new file mode 100644 >> index 000000000000..251dc8e8adfa >> --- /dev/null >> +++ b/drivers/media/i2c/ds90ub953.c >> @@ -0,0 +1,1590 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Driver for the Texas Instruments DS90UB953 video serializer >> + * >> + * Based on a driver from Luca Ceresoli <luca@lucaceresoli.net> >> + * >> + * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net> >> + * Copyright (c) 2022 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/clk.h> >> +#include <linux/delay.h> >> +#include <linux/gpio/driver.h> >> +#include <linux/i2c-atr.h> >> +#include <linux/i2c.h> >> +#include <linux/kernel.h> >> +#include <linux/math64.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_device.h> >> +#include <linux/of_graph.h> >> +#include <linux/rational.h> >> +#include <linux/regmap.h> >> + >> +#include <media/i2c/ds90ub9xx.h> >> +#include <media/v4l2-ctrls.h> >> +#include <media/v4l2-event.h> >> +#include <media/v4l2-subdev.h> >> + >> +#define UB953_PAD_SINK 0 >> +#define UB953_PAD_SOURCE 1 >> + >> +#define UB953_NUM_GPIOS 4 >> + >> +#define UB953_REG_RESET_CTL 0x01 >> +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) >> +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) >> + >> +#define UB953_REG_GENERAL_CFG 0x02 >> +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) >> +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 >> +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) >> +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) >> +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) >> + >> +#define UB953_REG_MODE_SEL 0x03 >> +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) >> +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) >> +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) >> + >> +#define UB953_REG_CLKOUT_CTRL0 0x06 >> +#define UB953_REG_CLKOUT_CTRL1 0x07 >> + >> +#define UB953_REG_SCL_HIGH_TIME 0x0B >> +#define UB953_REG_SCL_LOW_TIME 0x0C >> + >> +#define UB953_REG_LOCAL_GPIO_DATA 0x0d >> +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) >> +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) >> + >> +#define UB953_REG_GPIO_INPUT_CTRL 0x0e >> +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) >> +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) >> + >> +#define UB953_REG_REV_MASK_ID 0x50 >> +#define UB953_REG_GENERAL_STATUS 0x52 >> + >> +#define UB953_REG_GPIO_PIN_STS 0x53 >> +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) >> + >> +#define UB953_REG_BIST_ERR_CNT 0x54 >> +#define UB953_REG_CRC_ERR_CNT1 0x55 >> +#define UB953_REG_CRC_ERR_CNT2 0x56 >> + >> +#define UB953_REG_CSI_ERR_CNT 0x5c >> +#define UB953_REG_CSI_ERR_STATUS 0x5D >> +#define UB953_REG_CSI_ERR_DLANE01 0x5E >> +#define UB953_REG_CSI_ERR_DLANE23 0x5F >> +#define UB953_REG_CSI_ERR_CLK_LANE 0x60 >> +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 >> +#define UB953_REG_PKT_HDR_WC_LSB 0x62 >> +#define UB953_REG_PKT_HDR_WC_MSB 0x63 >> +#define UB953_REG_CSI_ECC 0x64 >> + >> +#define UB953_REG_IND_ACC_CTL 0xb0 >> +#define UB953_REG_IND_ACC_ADDR 0xb1 >> +#define UB953_REG_IND_ACC_DATA 0xb2 >> + >> +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) >> + >> +/* Indirect register blocks */ >> +#define UB953_IND_TARGET_PAT_GEN 0x00 >> +#define UB953_IND_TARGET_FPD3_TX 0x01 >> +#define UB953_IND_TARGET_DIE_ID 0x02 >> + >> +#define UB953_IND_PGEN_CTL 0x01 >> +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) >> +#define UB953_IND_PGEN_CFG 0x02 >> +#define UB953_IND_PGEN_CSI_DI 0x03 >> +#define UB953_IND_PGEN_LINE_SIZE1 0x04 >> +#define UB953_IND_PGEN_LINE_SIZE0 0x05 >> +#define UB953_IND_PGEN_BAR_SIZE1 0x06 >> +#define UB953_IND_PGEN_BAR_SIZE0 0x07 >> +#define UB953_IND_PGEN_ACT_LPF1 0x08 >> +#define UB953_IND_PGEN_ACT_LPF0 0x09 >> +#define UB953_IND_PGEN_TOT_LPF1 0x0A >> +#define UB953_IND_PGEN_TOT_LPF0 0x0B >> +#define UB953_IND_PGEN_LINE_PD1 0x0C >> +#define UB953_IND_PGEN_LINE_PD0 0x0D >> +#define UB953_IND_PGEN_VBP 0x0E >> +#define UB953_IND_PGEN_VFP 0x0F >> +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ >> + >> +/* Note: Only sync mode supported for now */ >> +enum ub953_mode { >> + /* FPD-Link III CSI-2 synchronous mode */ >> + UB953_MODE_SYNC, >> + /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */ >> + UB953_MODE_NONSYNC_EXT, >> + /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */ >> + UB953_MODE_NONSYNC_INT, >> + /* FPD-Link III DVP mode */ >> + UB953_MODE_DVP, >> +}; >> + >> +struct ub953_hw_data { >> + const char *model; >> + bool ub971; > > Maybe is_ub971, although a model enum could be nicer. Up to you. Yes I went the lazy way for now. I wasn't sure how the new models would be implemented. We probably don't so much need a model enum, but rater a feature list, and I wasn't sure what the features are so I just added a simple bool for now. >> +}; >> + >> +struct ub953_data { >> + const struct ub953_hw_data *hw_data; >> + >> + struct i2c_client *client; >> + struct regmap *regmap; >> + >> + u32 num_data_lanes; >> + >> + struct gpio_chip gpio_chip; >> + char gpio_chip_name[64]; >> + >> + struct v4l2_subdev sd; >> + struct media_pad pads[2]; >> + >> + struct v4l2_async_notifier notifier; >> + >> + struct v4l2_subdev *source_sd; >> + >> + struct v4l2_ctrl_handler ctrl_handler; >> + >> + u64 enabled_source_streams; >> + >> + struct device_node *tx_ep_np; >> + >> + /* lock for register access */ >> + struct mutex reg_lock; > > Why is this needed, can you access registers from multiple contexts ? Yes, we have gpio_chip, log_status, etc. The reg_lock is for the indirect registers, as we need to manage the paging with the help from priv->current_indirect_target. So even if the two contexts would be dealing with their own registers, and thus no lock needed, the paging makes us need a lock. >> + >> + u8 current_indirect_target; >> + >> + struct clk_hw clkout_clk_hw; >> + >> + enum ub953_mode mode; >> + >> + struct ds90ub9xx_platform_data *plat_data; >> +}; >> + >> +static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd) >> +{ >> + return container_of(sd, struct ub953_data, sd); >> +} >> + >> +/* >> + * HW Access >> + */ >> + >> +static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) >> +{ >> + unsigned int v; >> + int ret; >> + >> + mutex_lock(&priv->reg_lock); >> + >> + ret = regmap_read(priv->regmap, reg, &v); >> + if (ret) >> + dev_err(&priv->client->dev, >> + "Cannot read register 0x%02x: %d!\n", reg, ret); >> + else >> + *val = v; >> + >> + mutex_unlock(&priv->reg_lock); >> + >> + return ret; >> +} >> + >> +static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) >> +{ >> + int ret; >> + >> + mutex_lock(&priv->reg_lock); >> + >> + ret = regmap_write(priv->regmap, reg, val); >> + if (ret) >> + dev_err(&priv->client->dev, >> + "Cannot write register 0x%02x: %d!\n", reg, ret); >> + >> + mutex_unlock(&priv->reg_lock); >> + >> + return ret; >> +} >> + >> +static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) >> +{ >> + struct device *dev = &priv->client->dev; >> + int ret; >> + >> + if (priv->current_indirect_target == block) >> + return 0; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); >> + if (ret) { >> + dev_err(dev, "%s: cannot select indirect target %u (%d)!\n", >> + __func__, block, ret); >> + return ret; >> + } >> + >> + priv->current_indirect_target = block; >> + >> + return 0; >> +} >> + >> +__maybe_unused > > Looks like it's more than maybe unused, it's never used at all. Can the > function be dropped ? I'd rather keep it. I've dropped it once, then had to add it back when debugging or implementing some new feature, but then ilater t become unused again. >> +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) >> +{ >> + unsigned int v; >> + int ret; >> + >> + mutex_lock(&priv->reg_lock); >> + >> + ret = _ub953_select_ind_reg_block(priv, block); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); >> + if (ret) >> + goto out; >> + >> + ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); >> + if (ret) >> + goto out; >> + >> + *val = v; >> + >> +out: >> + mutex_unlock(&priv->reg_lock); >> + >> + return ret; >> +} >> + >> +static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) >> +{ >> + int ret; >> + >> + mutex_lock(&priv->reg_lock); >> + >> + ret = _ub953_select_ind_reg_block(priv, block); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); >> + >> +out: >> + mutex_unlock(&priv->reg_lock); >> + > > An error message would be useful on failure. Same in the next function. Right, these don't use the ub953_read and ub953_write anymore. I'll add it. >> + return ret; >> +} >> + >> +static int ub953_write_ind16(struct ub953_data *priv, u8 block, u8 reg, u16 val) >> +{ >> + int ret; >> + >> + mutex_lock(&priv->reg_lock); >> + >> + ret = _ub953_select_ind_reg_block(priv, block); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val >> 8); >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg + 1); > > There's no auto-increment ? :-( > >> + if (ret) >> + goto out; >> + >> + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val & 0xff); >> + if (ret) >> + goto out; >> + >> +out: >> + mutex_unlock(&priv->reg_lock); >> + >> + return ret; >> +} >> + >> +/* >> + * GPIO chip >> + */ >> +static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) >> +{ >> + struct ub953_data *priv = gpiochip_get_data(gc); >> + int ret; >> + u8 v; >> + >> + ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v); >> + if (ret) >> + return ret; >> + >> + if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)) >> + return GPIO_LINE_DIRECTION_IN; >> + else >> + return GPIO_LINE_DIRECTION_OUT; >> +} >> + >> +static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) >> +{ >> + struct ub953_data *priv = gpiochip_get_data(gc); >> + >> + return regmap_update_bits( >> + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, >> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | >> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), >> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); >> +} >> + >> +static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, >> + int value) >> +{ >> + struct ub953_data *priv = gpiochip_get_data(gc); >> + int ret; >> + >> + ret = regmap_update_bits( >> + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, >> + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), >> + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); >> + >> + if (ret) >> + return ret; >> + >> + return regmap_update_bits( >> + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, >> + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | >> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), >> + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); >> +} >> + >> +static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) >> +{ >> + struct ub953_data *priv = gpiochip_get_data(gc); >> + int ret; >> + u8 v; >> + >> + ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v); >> + if (ret) >> + return ret; >> + >> + return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); >> +} >> + >> +static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) >> +{ >> + struct ub953_data *priv = gpiochip_get_data(gc); >> + >> + regmap_update_bits( >> + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, >> + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), >> + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); >> +} >> + >> +static int ub953_gpio_of_xlate(struct gpio_chip *gc, >> + const struct of_phandle_args *gpiospec, >> + u32 *flags) >> +{ >> + if (flags) >> + *flags = gpiospec->args[1]; >> + >> + return gpiospec->args[0]; >> +} >> + >> +static int ub953_gpiochip_probe(struct ub953_data *priv) >> +{ >> + struct device *dev = &priv->client->dev; >> + struct gpio_chip *gc = &priv->gpio_chip; >> + int ret; >> + >> + /* Set all GPIOs to local input mode */ >> + ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); >> + ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); >> + >> + scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", >> + dev_name(dev)); >> + >> + gc->label = priv->gpio_chip_name; >> + gc->parent = dev; >> + gc->owner = THIS_MODULE; >> + gc->base = -1; >> + gc->can_sleep = 1; >> + gc->ngpio = UB953_NUM_GPIOS; >> + gc->get_direction = ub953_gpio_get_direction; >> + gc->direction_input = ub953_gpio_direction_in; >> + gc->direction_output = ub953_gpio_direction_out; >> + gc->get = ub953_gpio_get; >> + gc->set = ub953_gpio_set; >> + gc->of_xlate = ub953_gpio_of_xlate; >> + gc->of_node = priv->client->dev.of_node; >> + gc->of_gpio_n_cells = 2; >> + >> + ret = gpiochip_add_data(gc, priv); >> + if (ret) { >> + dev_err(dev, "Failed to add GPIOs: %d\n", ret); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static void ub953_gpiochip_remove(struct ub953_data *priv) >> +{ >> + gpiochip_remove(&priv->gpio_chip); >> +} >> + >> +/* >> + * V4L2 >> + */ >> + >> +static int _ub953_set_routing(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state, >> + struct v4l2_subdev_krouting *routing) >> +{ >> + static const struct v4l2_mbus_framefmt format = { >> + .width = 640, >> + .height = 480, >> + .code = MEDIA_BUS_FMT_UYVY8_1X16, >> + .field = V4L2_FIELD_NONE, >> + .colorspace = V4L2_COLORSPACE_SRGB, >> + .ycbcr_enc = V4L2_YCBCR_ENC_601, >> + .quantization = V4L2_QUANTIZATION_LIM_RANGE, >> + .xfer_func = V4L2_XFER_FUNC_SRGB, >> + }; >> + int ret; >> + >> + /* >> + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until >> + * frame desc is made dynamically allocated. >> + */ >> + >> + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) >> + return -EINVAL; >> + >> + ret = v4l2_subdev_routing_validate(sd, routing, >> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); >> + if (ret) >> + return ret; >> + >> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int ub953_set_routing(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state, >> + enum v4l2_subdev_format_whence which, >> + struct v4l2_subdev_krouting *routing) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + >> + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) >> + return -EBUSY; >> + >> + return _ub953_set_routing(sd, state, routing); >> +} >> + >> +static int ub953_get_source_frame_desc(struct ub953_data *priv, >> + struct v4l2_mbus_frame_desc *desc) >> +{ >> + struct media_pad *pad; >> + int ret; >> + >> + pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); >> + if (!pad) >> + return -EPIPE; >> + >> + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, >> + desc); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, >> + struct v4l2_mbus_frame_desc *fd) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + const struct v4l2_subdev_krouting *routing; >> + struct v4l2_mbus_frame_desc source_fd; >> + struct v4l2_subdev_route *route; >> + struct v4l2_subdev_state *state; >> + int ret; >> + >> + if (pad != UB953_PAD_SOURCE) >> + return -EINVAL; >> + >> + ret = ub953_get_source_frame_desc(priv, &source_fd); >> + if (ret) >> + return ret; >> + >> + state = v4l2_subdev_lock_and_get_active_state(sd); >> + >> + routing = &state->routing; >> + >> + memset(fd, 0, sizeof(*fd)); >> + >> + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; >> + >> + for_each_active_route(routing, route) { >> + struct v4l2_mbus_frame_desc_entry *source_entry = NULL; >> + unsigned int i; >> + >> + if (route->source_pad != pad) >> + continue; >> + >> + for (i = 0; i < source_fd.num_entries; ++i) >> + if (source_fd.entry[i].stream == route->sink_stream) { >> + source_entry = &source_fd.entry[i]; >> + break; >> + } >> + >> + if (!source_entry) { >> + dev_err(&priv->client->dev, >> + "Failed to find stream from source frame desc\n"); >> + ret = -EPIPE; >> + goto out; >> + } >> + >> + fd->entry[fd->num_entries].stream = route->source_stream; >> + fd->entry[fd->num_entries].flags = source_entry->flags; >> + fd->entry[fd->num_entries].length = source_entry->length; >> + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; >> + fd->entry[fd->num_entries].bus.csi2.vc = >> + source_entry->bus.csi2.vc; >> + fd->entry[fd->num_entries].bus.csi2.dt = >> + source_entry->bus.csi2.dt; >> + >> + fd->num_entries++; >> + } >> + >> +out: >> + v4l2_subdev_unlock_state(state); >> + >> + return ret; >> +} >> + >> +static int ub953_set_fmt(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state, >> + struct v4l2_subdev_format *format) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + struct v4l2_mbus_framefmt *fmt; >> + >> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && >> + priv->enabled_source_streams) >> + return -EBUSY; >> + >> + /* No transcoding, source and sink formats must match. */ >> + if (format->pad == UB953_PAD_SOURCE) >> + return v4l2_subdev_get_fmt(sd, state, format); >> + >> + /* Set sink format */ >> + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, >> + format->stream); >> + if (!fmt) >> + return -EINVAL; >> + >> + *fmt = format->format; >> + >> + /* Propagate to source format */ >> + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, >> + format->stream); >> + if (!fmt) >> + return -EINVAL; >> + >> + *fmt = format->format; >> + >> + return 0; >> +} >> + >> +static int ub953_init_cfg(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state) >> +{ >> + struct v4l2_subdev_route routes[] = { >> + { >> + .sink_pad = UB953_PAD_SINK, >> + .sink_stream = 0, >> + .source_pad = UB953_PAD_SOURCE, >> + .source_stream = 0, >> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, >> + }, >> + }; >> + >> + struct v4l2_subdev_krouting routing = { >> + .num_routes = ARRAY_SIZE(routes), >> + .routes = routes, >> + }; >> + >> + return _ub953_set_routing(sd, state, &routing); >> +} >> + >> +static int ub953_log_status(struct v4l2_subdev *sd) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + struct device *dev = &priv->client->dev; >> + u8 v = 0, v1 = 0, v2 = 0; >> + unsigned int i; >> + char id[7]; >> + u8 gpio_local_data; >> + u8 gpio_input_ctrl; >> + u8 gpio_pin_sts; >> + >> + for (i = 0; i < 6; ++i) >> + ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); >> + id[6] = 0; >> + >> + dev_info(dev, "ID '%s'\n", id); >> + >> + ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); >> + dev_info(dev, "GENERAL_STATUS %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); >> + ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); >> + dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); >> + >> + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); >> + dev_info(dev, "CSI error count %u\n", v); >> + >> + ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); >> + dev_info(dev, "CSI_ERR_STATUS %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); >> + dev_info(dev, "CSI_ERR_DLANE01 %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); >> + dev_info(dev, "CSI_ERR_DLANE23 %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); >> + dev_info(dev, "CSI_ERR_CLK_LANE %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); >> + dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); >> + >> + ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1); >> + ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2); >> + dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); >> + >> + ub953_read(priv, UB953_REG_CSI_ECC, &v); >> + dev_info(dev, "CSI ECC %#x\n", v); >> + >> + ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); >> + ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); >> + ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); >> + >> + for (i = 0; i < UB953_NUM_GPIOS; ++i) { >> + dev_info(dev, >> + "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", >> + i, >> + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)), >> + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)), >> + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)), >> + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)), >> + !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i))); >> + } >> + >> + return 0; >> +} >> + >> +static int ub953_enable_streams(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state, u32 pad, >> + u64 streams_mask) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + struct media_pad *remote_pad; >> + u64 sink_streams; >> + int ret; >> + >> + if (streams_mask & priv->enabled_source_streams) >> + return -EALREADY; >> + >> + sink_streams = v4l2_subdev_state_xlate_streams( >> + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); >> + >> + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); >> + >> + ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, >> + sink_streams); >> + if (ret) >> + return ret; >> + >> + priv->enabled_source_streams |= streams_mask; >> + >> + return 0; >> +} >> + >> +static int ub953_disable_streams(struct v4l2_subdev *sd, >> + struct v4l2_subdev_state *state, u32 pad, >> + u64 streams_mask) >> +{ >> + struct ub953_data *priv = sd_to_ub953(sd); >> + struct media_pad *remote_pad; >> + int ret; >> + u64 sink_streams; >> + >> + if ((streams_mask & priv->enabled_source_streams) != streams_mask) >> + return -EALREADY; >> + >> + sink_streams = v4l2_subdev_state_xlate_streams( >> + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); >> + >> + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); >> + >> + ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, >> + sink_streams); >> + if (ret) >> + return ret; >> + >> + priv->enabled_source_streams &= ~streams_mask; >> + >> + return 0; >> +} >> + >> +static const struct v4l2_subdev_pad_ops ub953_pad_ops = { >> + .enable_streams = ub953_enable_streams, >> + .disable_streams = ub953_disable_streams, >> + .set_routing = ub953_set_routing, >> + .get_frame_desc = ub953_get_frame_desc, >> + .get_fmt = v4l2_subdev_get_fmt, >> + .set_fmt = ub953_set_fmt, >> + .init_cfg = ub953_init_cfg, >> +}; >> + >> +static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { >> + .log_status = ub953_log_status, >> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, >> + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > > Align the = for all structures or for none. Ok. >> +}; >> + >> +static const struct v4l2_subdev_ops ub953_subdev_ops = { >> + .core = &ub953_subdev_core_ops, >> + .pad = &ub953_pad_ops, >> +}; >> + >> +static const struct media_entity_operations ub953_entity_ops = { >> + .link_validate = v4l2_subdev_link_validate, >> +}; >> + >> +enum { >> + TEST_PATTERN_DISABLED = 0, >> + TEST_PATTERN_V_COLOR_BARS_1, >> + TEST_PATTERN_V_COLOR_BARS_2, >> + TEST_PATTERN_V_COLOR_BARS_4, >> + TEST_PATTERN_V_COLOR_BARS_8, >> +}; >> + >> +static const char *const ub953_tpg_qmenu[] = { >> + "Disabled", >> + "1 vertical color bar", >> + "2 vertical color bars", >> + "4 vertical color bars", >> + "8 vertical color bars", >> +}; >> + >> +static int ub953_enable_tpg(struct ub953_data *priv, int tpg_num) >> +{ >> + struct v4l2_subdev *sd = &priv->sd; >> + struct v4l2_subdev_state *state; >> + struct v4l2_mbus_framefmt *fmt; >> + u8 vbp, vfp; >> + u16 blank_lines; >> + u16 width; >> + u16 height; >> + >> + u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ >> + u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; >> + u8 num_cbars = 1 << cbars_idx; >> + >> + u16 line_size; /* Line size [bytes] */ >> + u16 bar_size; /* cbar size [bytes] */ >> + u16 act_lpf; /* active lines/frame */ >> + u16 tot_lpf; /* tot lines/frame */ >> + u16 line_pd; /* Line period in 10-ns units */ >> + >> + u16 fps = 30; >> + >> + vbp = 33; >> + vfp = 10; >> + blank_lines = vbp + vfp + 2; /* total blanking lines */ >> + >> + state = v4l2_subdev_get_locked_active_state(sd); >> + >> + if (state->routing.num_routes != 1) >> + return -EINVAL; >> + >> + fmt = v4l2_subdev_state_get_stream_format(state, UB953_PAD_SOURCE, 0); >> + if (!fmt) >> + return -EINVAL; >> + >> + if (fmt->code != MEDIA_BUS_FMT_UYVY8_1X16) >> + return -EINVAL; >> + >> + width = fmt->width; >> + height = fmt->height; >> + >> + line_size = width * bytespp; >> + bar_size = line_size / num_cbars; >> + act_lpf = height; >> + tot_lpf = act_lpf + blank_lines; >> + line_pd = 100000000 / fps / tot_lpf; >> + >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, >> + UB953_IND_PGEN_CTL_PGEN_ENABLE); >> + >> + /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CFG, >> + cbars_idx << 4 | 0x2); >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CSI_DI, >> + 0x1e); >> + >> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, >> + UB953_IND_PGEN_LINE_SIZE1, line_size); >> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, >> + UB953_IND_PGEN_BAR_SIZE1, bar_size); >> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, >> + UB953_IND_PGEN_ACT_LPF1, act_lpf); >> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, >> + UB953_IND_PGEN_TOT_LPF1, tot_lpf); >> + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, >> + UB953_IND_PGEN_LINE_PD1, line_pd); >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VBP, >> + vbp); >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VFP, >> + vfp); >> + >> + return 0; >> +} >> + >> +static void ub953_disable_tpg(struct ub953_data *priv) >> +{ >> + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, >> + 0x0); >> +} >> + >> +static int ub953_s_ctrl(struct v4l2_ctrl *ctrl) >> +{ >> + struct ub953_data *priv = >> + container_of(ctrl->handler, struct ub953_data, ctrl_handler); >> + int ret = 0; >> + >> + switch (ctrl->id) { >> + case V4L2_CID_TEST_PATTERN: >> + if (ctrl->val == 0) >> + ub953_disable_tpg(priv); >> + else >> + ret = ub953_enable_tpg(priv, ctrl->val); >> + break; >> + } >> + >> + return ret; >> +} >> + >> +static const struct v4l2_ctrl_ops ub953_ctrl_ops = { >> + .s_ctrl = ub953_s_ctrl, >> +}; >> + >> +static int ub953_notify_bound(struct v4l2_async_notifier *notifier, >> + struct v4l2_subdev *source_subdev, >> + struct v4l2_async_subdev *asd) >> +{ >> + struct ub953_data *priv = sd_to_ub953(notifier->sd); >> + struct device *dev = &priv->client->dev; >> + unsigned int src_pad; >> + int ret; >> + >> + ret = media_entity_get_fwnode_pad(&source_subdev->entity, >> + source_subdev->fwnode, >> + MEDIA_PAD_FL_SOURCE); >> + if (ret < 0) { >> + dev_err(dev, "Failed to find pad for %s\n", >> + source_subdev->name); >> + return ret; >> + } >> + >> + priv->source_sd = source_subdev; >> + src_pad = ret; >> + >> + ret = media_create_pad_link( >> + &source_subdev->entity, src_pad, &priv->sd.entity, 0, >> + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); >> + if (ret) { >> + dev_err(dev, "Unable to link %s:%u -> %s:0\n", >> + source_subdev->name, src_pad, priv->sd.name); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static const struct v4l2_async_notifier_operations ub953_notify_ops = { >> + .bound = ub953_notify_bound, >> +}; >> + >> +static int ub953_v4l2_notifier_register(struct ub953_data *priv) >> +{ >> + struct device *dev = &priv->client->dev; >> + struct v4l2_async_subdev *asd; >> + struct device_node *ep_node; >> + int ret; >> + >> + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); > > s/0, 0/UB953_PAD_SINK, 0/ > > Similar comment for other calls to this function below. Ok. >> + if (!ep_node) { >> + dev_err(dev, "No graph endpoint\n"); >> + return -ENODEV; >> + } >> + >> + v4l2_async_nf_init(&priv->notifier); >> + >> + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, >> + of_fwnode_handle(ep_node), >> + struct v4l2_async_subdev); >> + >> + of_node_put(ep_node); >> + >> + if (IS_ERR(asd)) { >> + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); >> + v4l2_async_nf_cleanup(&priv->notifier); >> + return PTR_ERR(asd); >> + } >> + >> + priv->notifier.ops = &ub953_notify_ops; >> + >> + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); >> + if (ret) { >> + dev_err(dev, "Failed to register subdev_notifier"); >> + v4l2_async_nf_cleanup(&priv->notifier); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static void ub953_v4l2_notifier_unregister(struct ub953_data *priv) >> +{ >> + v4l2_async_nf_unregister(&priv->notifier); >> + v4l2_async_nf_cleanup(&priv->notifier); >> +} >> + >> +/* >> + * Probing >> + */ >> + >> +static int ub953_i2c_master_init(struct ub953_data *priv) >> +{ >> + /* i2c fast mode */ >> + u32 ref = 26250000; >> + u32 scl_high = 915; /* ns */ >> + u32 scl_low = 1641; /* ns */ >> + int ret; >> + >> + scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5; >> + scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5; >> + >> + ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high); >> + if (ret) >> + return ret; >> + >> + ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static u64 ub953_get_fc_rate(struct ub953_data *priv) >> +{ >> + if (priv->hw_data->ub971) { >> + switch (priv->mode) { >> + case UB953_MODE_SYNC: >> + return priv->plat_data->bc_rate * 160ull; >> + default: >> + /* Not supported */ >> + return 0; >> + } >> + } else { >> + switch (priv->mode) { >> + case UB953_MODE_SYNC: >> + return priv->plat_data->bc_rate / 2 * 160ull; >> + default: >> + /* Not supported */ >> + return 0; >> + } >> + } > > This could be simplified to > > if (priv->mode != UB953_MODE_SYNC) > /* Not supported */ > return 0; > > if (priv->hw_data->ub971) > return priv->plat_data->bc_rate * 160ull; > else > return priv->plat_data->bc_rate / 2 * 160ull; Ok. >> +} >> + >> +static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, >> + unsigned long target, u64 fc, >> + u8 *hs_div, u8 *m, u8 *n) >> +{ >> + /* >> + * We always use 4 as a pre-divider (HS_CLK_DIV = 2). >> + * >> + * According to the datasheet: >> + * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)." >> + * - "if it is not possible to have an integer ratio of N/M, it is best to >> + * select a smaller value for HS_CLK_DIV. >> + * >> + * For above reasons the default HS_CLK_DIV seems the best in the average >> + * case. Use always that value to keep the code simple. >> + */ >> + static const unsigned long hs_clk_div = 4; >> + >> + u64 fc_divided; >> + unsigned long mul, div; >> + unsigned long res; >> + >> + /* clkout = fc / hs_clk_div * m / n */ >> + >> + fc_divided = div_u64(fc, hs_clk_div); >> + >> + rational_best_approximation(target, fc_divided, (1 << 5) - 1, >> + (1 << 8) - 1, &mul, &div); >> + >> + res = div_u64(fc_divided * mul, div); >> + >> + *hs_div = hs_clk_div; >> + *m = mul; >> + *n = div; >> + >> + return res; >> +} >> + >> +static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv, >> + unsigned long target, u64 fc, >> + u8 *m, u8 *n) >> +{ >> + u64 fc_divided; >> + unsigned long mul, div; >> + unsigned long res; >> + >> + /* clkout = fc * m / (8 * n) */ >> + >> + fc_divided = div_u64(fc, 8); >> + >> + rational_best_approximation(target, fc_divided, (1 << 5) - 1, >> + (1 << 8) - 1, &mul, &div); >> + >> + res = div_u64(fc_divided * mul, div); >> + >> + *m = mul; >> + *n = div; >> + >> + return res; >> +} >> + >> +static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); >> + struct device *dev = &priv->client->dev; >> + u8 ctrl0, ctrl1; >> + u32 mul, div; >> + u64 fc_rate; >> + u32 hs_clk_div; >> + u64 rate; >> + int ret; >> + >> + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0); >> + if (ret) { >> + dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret); >> + return 0; >> + } >> + >> + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1); >> + if (ret) { >> + dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret); >> + return 0; >> + } >> + >> + fc_rate = ub953_get_fc_rate(priv); >> + >> + if (priv->hw_data->ub971) { >> + mul = ctrl0 & 0x1f; >> + div = ctrl1; >> + >> + if (div == 0) >> + return 0; >> + >> + rate = div_u64(fc_rate * mul, 8 * div); >> + >> + dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n", >> + fc_rate, mul, div, rate); >> + } else { >> + mul = ctrl0 & 0x1f; >> + hs_clk_div = 1 << (ctrl0 >> 5); >> + div = ctrl1; >> + >> + if (div == 0) >> + return 0; >> + >> + rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div); >> + >> + dev_dbg(dev, >> + "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n", >> + fc_rate, hs_clk_div, mul, div, rate); >> + } >> + >> + return rate; >> +} >> + >> +static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, >> + unsigned long *parent_rate) >> +{ >> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); >> + struct device *dev = &priv->client->dev; >> + unsigned long res; >> + u64 fc_rate; >> + u8 hs_div, m, n; >> + >> + fc_rate = ub953_get_fc_rate(priv); >> + >> + if (priv->hw_data->ub971) { >> + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); >> + >> + dev_dbg(dev, >> + "%s %llu * %u / (8 * %u) = %lu (requested %lu)", >> + __func__, fc_rate, m, n, res, rate); >> + } else { >> + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); >> + >> + dev_dbg(dev, >> + "%s %llu / %u * %u / %u = %lu (requested %lu)", >> + __func__, fc_rate, hs_div, m, n, res, rate); >> + } >> + >> + return res; >> +} >> + >> +static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, >> + unsigned long parent_rate) >> +{ >> + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); >> + u64 fc_rate; >> + u8 hs_div, m, n; >> + unsigned long res; >> + >> + fc_rate = ub953_get_fc_rate(priv); >> + >> + if (priv->hw_data->ub971) { >> + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); >> + >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); >> + } else { >> + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); >> + >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); >> + } >> + >> + dev_dbg(&priv->client->dev, >> + "%s %lu (requested %lu)\n", __func__, res, rate); >> + >> + return 0; >> +} >> + >> +static const struct clk_ops ub953_clkout_ops = { >> + .recalc_rate = ub953_clkout_recalc_rate, >> + .round_rate = ub953_clkout_round_rate, >> + .set_rate = ub953_clkout_set_rate, >> +}; >> + >> +static void ub953_init_clkout_ub953(struct ub953_data *priv) >> +{ >> + u64 fc_rate; >> + u8 hs_div, m, n; >> + >> + fc_rate = ub953_get_fc_rate(priv); >> + >> + ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n); >> + >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); >> +} >> + >> +static void ub953_init_clkout_ub971(struct ub953_data *priv) >> +{ >> + u64 fc_rate; >> + u8 m, n; >> + >> + fc_rate = ub953_get_fc_rate(priv); >> + >> + ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n); >> + >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); >> + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); >> +} >> + >> +static int ub953_register_clkout(struct ub953_data *priv) >> +{ >> + struct device *dev = &priv->client->dev; >> + const struct clk_init_data init = { >> + .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out", >> + priv->hw_data->model, dev_name(dev)), >> + .ops = &ub953_clkout_ops, >> + }; >> + int ret; >> + >> + /* Initialize clkout to 25MHz by default */ >> + if (priv->hw_data->ub971) >> + ub953_init_clkout_ub971(priv); >> + else >> + ub953_init_clkout_ub953(priv); >> + >> + priv->clkout_clk_hw.init = &init; >> + >> + ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw); >> + kfree(init.name); >> + if (ret) >> + return dev_err_probe(dev, ret, "Cannot register clock HW\n"); >> + >> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, >> + &priv->clkout_clk_hw); >> + if (ret) >> + return dev_err_probe(dev, ret, >> + "Cannot add OF clock provider\n"); >> + >> + return 0; >> +} >> + >> +static int ub953_add_i2c_adapter(struct ub953_data *priv) >> +{ >> + struct device *dev = &priv->client->dev; >> + struct fwnode_handle *i2c_handle; >> + int ret; >> + >> + i2c_handle = device_get_named_child_node(dev, "i2c"); >> + if (!i2c_handle) >> + return 0; >> + >> + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, >> + i2c_handle); >> + >> + fwnode_handle_put(i2c_handle); >> + >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static const struct regmap_config ub953_regmap_config = { >> + .name = "ds90ub953", >> + .reg_bits = 8, >> + .val_bits = 8, >> + .reg_format_endian = REGMAP_ENDIAN_DEFAULT, >> + .val_format_endian = REGMAP_ENDIAN_DEFAULT, >> +}; >> + >> +static int ub953_parse_dt(struct ub953_data *priv) >> +{ >> + struct device_node *np = priv->client->dev.of_node; >> + struct device *dev = &priv->client->dev; >> + struct device_node *ep_np; >> + int ret; >> + >> + if (!np) { >> + dev_err(dev, "OF: no device tree node!\n"); >> + return -ENOENT; >> + } >> + >> + ep_np = of_graph_get_endpoint_by_regs(np, 0, 0); >> + if (!ep_np) { >> + dev_err(dev, "OF: no endpoint\n"); >> + return -ENOENT; >> + } >> + >> + ret = of_property_count_u32_elems(ep_np, "data-lanes"); >> + >> + of_node_put(ep_np); >> + >> + if (ret <= 0) { >> + dev_err(dev, "OF: failed to parse data-lanes: %d\n", ret); >> + return ret; >> + } >> + >> + if (ret != 1 && ret != 2 && ret != 4) { >> + dev_err(dev, "OF: bad number of data-lanes: %d\n", ret); >> + return -EINVAL; >> + } >> + >> + priv->num_data_lanes = ret; >> + >> + return 0; >> +} >> + >> +static int ub953_probe(struct i2c_client *client) >> +{ >> + struct device *dev = &client->dev; >> + struct ub953_data *priv; >> + int ret; >> + u8 v; >> + bool mode_override; >> + >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); >> + if (!priv) >> + return -ENOMEM; >> + >> + priv->client = client; >> + >> + priv->hw_data = of_device_get_match_data(dev); >> + if (!priv->hw_data) >> + return -ENODEV; >> + >> + priv->plat_data = dev_get_platdata(&client->dev); >> + if (!priv->plat_data) { >> + dev_err(dev, "Platform data missing\n"); >> + return -ENODEV; >> + } >> + >> + mutex_init(&priv->reg_lock); >> + >> + /* >> + * Initialize to invalid values so that the first reg writes will >> + * configure the target. >> + */ >> + priv->current_indirect_target = 0xff; >> + >> + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); >> + if (IS_ERR(priv->regmap)) { >> + dev_err(dev, "Failed to init regmap\n"); >> + ret = PTR_ERR(priv->regmap); >> + goto err_mutex_destroy; >> + } >> + >> + ret = ub953_parse_dt(priv); >> + if (ret) >> + goto err_mutex_destroy; >> + >> + ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); >> + if (ret) >> + goto err_mutex_destroy; >> + >> + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) { >> + dev_err(dev, "Mode value not stabilized\n"); >> + ret = -ENODEV; >> + goto err_mutex_destroy; >> + } >> + >> + mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; >> + >> + switch (v & UB953_REG_MODE_SEL_MODE_MASK) { >> + case 0: >> + priv->mode = UB953_MODE_SYNC; >> + break; >> + case 2: >> + priv->mode = UB953_MODE_NONSYNC_EXT; >> + break; >> + case 3: >> + priv->mode = UB953_MODE_NONSYNC_INT; >> + break; >> + case 5: >> + priv->mode = UB953_MODE_DVP; >> + break; >> + default: >> + dev_err(dev, "Illegal mode in mode register\n"); >> + ret = -ENODEV; >> + goto err_mutex_destroy; >> + } >> + >> + dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", >> + priv->mode); >> + >> + if (priv->mode != UB953_MODE_SYNC) { >> + dev_err(dev, "Only synchronous mode supported\n"); >> + ret = -ENODEV; >> + goto err_mutex_destroy; >> + } >> + >> + ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); >> + if (ret) { >> + dev_err(dev, "Failed to read revision: %d", ret); >> + goto err_mutex_destroy; >> + } >> + >> + dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); >> + >> + ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); >> + if (ret) >> + goto err_mutex_destroy; >> + >> + dev_dbg(dev, "i2c strap setting %s V\n", >> + (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); > > Please move the hardware checks and initialization to a separate > function, probe() is too big. Yep. >> + >> + ret = ub953_i2c_master_init(priv); >> + if (ret) { >> + dev_err(dev, "i2c init failed: %d\n", ret); >> + goto err_mutex_destroy; >> + } >> + >> + ret = ub953_gpiochip_probe(priv); >> + if (ret) { >> + dev_err(dev, "Failed to init gpiochip\n"); >> + goto err_mutex_destroy; >> + } >> + >> + ub953_write(priv, UB953_REG_GENERAL_CFG, >> + UB953_REG_GENERAL_CFG_CONT_CLK | >> + ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | >> + UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); > > This too. > >> + >> + ret = ub953_register_clkout(priv); >> + if (ret) { >> + dev_err(dev, "Failed to register clkout\n"); >> + goto err_gpiochip_remove; >> + } >> + >> + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); >> + >> + v4l2_ctrl_handler_init(&priv->ctrl_handler, >> + ARRAY_SIZE(ub953_tpg_qmenu) - 1); >> + priv->sd.ctrl_handler = &priv->ctrl_handler; >> + >> + v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub953_ctrl_ops, >> + V4L2_CID_TEST_PATTERN, >> + ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0, >> + ub953_tpg_qmenu); >> + >> + if (priv->ctrl_handler.error) { >> + ret = priv->ctrl_handler.error; >> + goto err_gpiochip_remove; >> + } >> + >> + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | >> + V4L2_SUBDEV_FL_STREAMS; >> + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; >> + priv->sd.entity.ops = &ub953_entity_ops; >> + >> + priv->pads[0].flags = MEDIA_PAD_FL_SINK; >> + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; >> + >> + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); >> + if (ret) { >> + dev_err(dev, "Failed to init pads\n"); >> + goto err_remove_ctrls; >> + } >> + >> + priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); > > Error handling ? Will add. >> + priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); >> + >> + priv->sd.state_lock = priv->sd.ctrl_handler->lock; >> + >> + ret = v4l2_subdev_init_finalize(&priv->sd); >> + if (ret) >> + goto err_entity_cleanup; > > I think I would move subdev init to a separate function too. Yes. >> + >> + ret = ub953_v4l2_notifier_register(priv); >> + if (ret) { >> + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); >> + goto err_free_state; >> + } >> + >> + ret = v4l2_async_register_subdev(&priv->sd); >> + if (ret) { >> + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); >> + goto err_unreg_notif; >> + } >> + >> + ret = ub953_add_i2c_adapter(priv); >> + if (ret) { >> + dev_err(dev, "failed to add remote i2c adapter\n"); >> + goto err_unreg_async_subdev; >> + } >> + >> + return 0; >> + >> +err_unreg_async_subdev: >> + v4l2_async_unregister_subdev(&priv->sd); >> +err_unreg_notif: >> + ub953_v4l2_notifier_unregister(priv); >> +err_free_state: >> + v4l2_subdev_cleanup(&priv->sd); >> +err_entity_cleanup: >> + if (priv->tx_ep_np) >> + of_node_put(priv->tx_ep_np); >> + >> + media_entity_cleanup(&priv->sd.entity); >> +err_remove_ctrls: >> + v4l2_ctrl_handler_free(&priv->ctrl_handler); >> +err_gpiochip_remove: >> + ub953_gpiochip_remove(priv); >> +err_mutex_destroy: >> + mutex_destroy(&priv->reg_lock); >> + >> + return ret; >> +} >> + >> +static void ub953_remove(struct i2c_client *client) >> +{ >> + struct v4l2_subdev *sd = i2c_get_clientdata(client); >> + struct ub953_data *priv = sd_to_ub953(sd); >> + >> + i2c_atr_del_adapter(priv->plat_data->atr, >> + priv->plat_data->port); >> + >> + v4l2_async_unregister_subdev(&priv->sd); >> + >> + ub953_v4l2_notifier_unregister(priv); >> + >> + v4l2_subdev_cleanup(&priv->sd); >> + >> + of_node_put(priv->tx_ep_np); >> + >> + media_entity_cleanup(&priv->sd.entity); >> + >> + v4l2_ctrl_handler_free(&priv->ctrl_handler); >> + >> + ub953_gpiochip_remove(priv); >> + mutex_destroy(&priv->reg_lock); >> +} >> + >> +static const struct ub953_hw_data ds90ub953_hw = { >> + .model = "ub953", >> +}; >> + >> +static const struct ub953_hw_data ds90ub971_hw = { >> + .model = "ub971", >> + .ub971 = true, >> +}; >> + >> +static const struct i2c_device_id ub953_id[] = { >> + { "ds90ub953-q1", 0 }, >> + { "ds90ub971-q1", 0 }, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(i2c, ub953_id); >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id ub953_dt_ids[] = { >> + { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, >> + { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(of, ub953_dt_ids); >> +#endif >> + >> +static struct i2c_driver ds90ub953_driver = { >> + .probe_new = ub953_probe, >> + .remove = ub953_remove, >> + .id_table = ub953_id, >> + .driver = { >> + .name = "ds90ub953", >> + .owner = THIS_MODULE, >> + .of_match_table = of_match_ptr(ub953_dt_ids), >> + }, >> +}; >> + >> +module_i2c_driver(ds90ub953_driver); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_DESCRIPTION("Texas Instruments DS90UB953 serializer driver"); >> +MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>"); >> +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>"); >> +MODULE_IMPORT_NS(I2C_ATR); Tomi
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index eb312d6e9cf6..29594c724307 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1614,6 +1614,19 @@ config VIDEO_DS90UB913 Device driver for the Texas Instruments DS90UB913 FPD-Link III Serializer. +config VIDEO_DS90UB953 + tristate "TI DS90UB953 Serializer" + depends on OF && I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select REGMAP_I2C + select OF_GPIO + select I2C_ATR + help + Device driver for the Texas Instruments DS90UB953 + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. + config VIDEO_DS90UB960 tristate "TI DS90UB960 Deserializer" depends on OF && I2C && VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index c4875ec8c3b9..efd5f717a5f7 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -143,4 +143,5 @@ obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_WM8739) += wm8739.o obj-$(CONFIG_VIDEO_WM8775) += wm8775.o obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c new file mode 100644 index 000000000000..251dc8e8adfa --- /dev/null +++ b/drivers/media/i2c/ds90ub953.c @@ -0,0 +1,1590 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Texas Instruments DS90UB953 video serializer + * + * Based on a driver from Luca Ceresoli <luca@lucaceresoli.net> + * + * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net> + * Copyright (c) 2022 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + */ + +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio/driver.h> +#include <linux/i2c-atr.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/rational.h> +#include <linux/regmap.h> + +#include <media/i2c/ds90ub9xx.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <media/v4l2-subdev.h> + +#define UB953_PAD_SINK 0 +#define UB953_PAD_SOURCE 1 + +#define UB953_NUM_GPIOS 4 + +#define UB953_REG_RESET_CTL 0x01 +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) + +#define UB953_REG_GENERAL_CFG 0x02 +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) + +#define UB953_REG_MODE_SEL 0x03 +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) + +#define UB953_REG_CLKOUT_CTRL0 0x06 +#define UB953_REG_CLKOUT_CTRL1 0x07 + +#define UB953_REG_SCL_HIGH_TIME 0x0B +#define UB953_REG_SCL_LOW_TIME 0x0C + +#define UB953_REG_LOCAL_GPIO_DATA 0x0d +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) + +#define UB953_REG_GPIO_INPUT_CTRL 0x0e +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) + +#define UB953_REG_REV_MASK_ID 0x50 +#define UB953_REG_GENERAL_STATUS 0x52 + +#define UB953_REG_GPIO_PIN_STS 0x53 +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) + +#define UB953_REG_BIST_ERR_CNT 0x54 +#define UB953_REG_CRC_ERR_CNT1 0x55 +#define UB953_REG_CRC_ERR_CNT2 0x56 + +#define UB953_REG_CSI_ERR_CNT 0x5c +#define UB953_REG_CSI_ERR_STATUS 0x5D +#define UB953_REG_CSI_ERR_DLANE01 0x5E +#define UB953_REG_CSI_ERR_DLANE23 0x5F +#define UB953_REG_CSI_ERR_CLK_LANE 0x60 +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 +#define UB953_REG_PKT_HDR_WC_LSB 0x62 +#define UB953_REG_PKT_HDR_WC_MSB 0x63 +#define UB953_REG_CSI_ECC 0x64 + +#define UB953_REG_IND_ACC_CTL 0xb0 +#define UB953_REG_IND_ACC_ADDR 0xb1 +#define UB953_REG_IND_ACC_DATA 0xb2 + +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) + +/* Indirect register blocks */ +#define UB953_IND_TARGET_PAT_GEN 0x00 +#define UB953_IND_TARGET_FPD3_TX 0x01 +#define UB953_IND_TARGET_DIE_ID 0x02 + +#define UB953_IND_PGEN_CTL 0x01 +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) +#define UB953_IND_PGEN_CFG 0x02 +#define UB953_IND_PGEN_CSI_DI 0x03 +#define UB953_IND_PGEN_LINE_SIZE1 0x04 +#define UB953_IND_PGEN_LINE_SIZE0 0x05 +#define UB953_IND_PGEN_BAR_SIZE1 0x06 +#define UB953_IND_PGEN_BAR_SIZE0 0x07 +#define UB953_IND_PGEN_ACT_LPF1 0x08 +#define UB953_IND_PGEN_ACT_LPF0 0x09 +#define UB953_IND_PGEN_TOT_LPF1 0x0A +#define UB953_IND_PGEN_TOT_LPF0 0x0B +#define UB953_IND_PGEN_LINE_PD1 0x0C +#define UB953_IND_PGEN_LINE_PD0 0x0D +#define UB953_IND_PGEN_VBP 0x0E +#define UB953_IND_PGEN_VFP 0x0F +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ + +/* Note: Only sync mode supported for now */ +enum ub953_mode { + /* FPD-Link III CSI-2 synchronous mode */ + UB953_MODE_SYNC, + /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */ + UB953_MODE_NONSYNC_EXT, + /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */ + UB953_MODE_NONSYNC_INT, + /* FPD-Link III DVP mode */ + UB953_MODE_DVP, +}; + +struct ub953_hw_data { + const char *model; + bool ub971; +}; + +struct ub953_data { + const struct ub953_hw_data *hw_data; + + struct i2c_client *client; + struct regmap *regmap; + + u32 num_data_lanes; + + struct gpio_chip gpio_chip; + char gpio_chip_name[64]; + + struct v4l2_subdev sd; + struct media_pad pads[2]; + + struct v4l2_async_notifier notifier; + + struct v4l2_subdev *source_sd; + + struct v4l2_ctrl_handler ctrl_handler; + + u64 enabled_source_streams; + + struct device_node *tx_ep_np; + + /* lock for register access */ + struct mutex reg_lock; + + u8 current_indirect_target; + + struct clk_hw clkout_clk_hw; + + enum ub953_mode mode; + + struct ds90ub9xx_platform_data *plat_data; +}; + +static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ub953_data, sd); +} + +/* + * HW Access + */ + +static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) +{ + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_read(priv->regmap, reg, &v); + if (ret) + dev_err(&priv->client->dev, + "Cannot read register 0x%02x: %d!\n", reg, ret); + else + *val = v; + + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_write(priv->regmap, reg, val); + if (ret) + dev_err(&priv->client->dev, + "Cannot write register 0x%02x: %d!\n", reg, ret); + + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int _ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) +{ + struct device *dev = &priv->client->dev; + int ret; + + if (priv->current_indirect_target == block) + return 0; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); + if (ret) { + dev_err(dev, "%s: cannot select indirect target %u (%d)!\n", + __func__, block, ret); + return ret; + } + + priv->current_indirect_target = block; + + return 0; +} + +__maybe_unused +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) +{ + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = _ub953_select_ind_reg_block(priv, block); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); + if (ret) + goto out; + + ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); + if (ret) + goto out; + + *val = v; + +out: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&priv->reg_lock); + + ret = _ub953_select_ind_reg_block(priv, block); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); + +out: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub953_write_ind16(struct ub953_data *priv, u8 block, u8 reg, u16 val) +{ + int ret; + + mutex_lock(&priv->reg_lock); + + ret = _ub953_select_ind_reg_block(priv, block); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val >> 8); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg + 1); + if (ret) + goto out; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val & 0xff); + if (ret) + goto out; + +out: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +/* + * GPIO chip + */ +static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + u8 v; + + ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v); + if (ret) + return ret; + + if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)) + return GPIO_LINE_DIRECTION_IN; + else + return GPIO_LINE_DIRECTION_OUT; +} + +static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + + return regmap_update_bits( + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); +} + +static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + + ret = regmap_update_bits( + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); + + if (ret) + return ret; + + return regmap_update_bits( + priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); +} + +static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + u8 v; + + ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v); + if (ret) + return ret; + + return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); +} + +static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + + regmap_update_bits( + priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); +} + +static int ub953_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} + +static int ub953_gpiochip_probe(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct gpio_chip *gc = &priv->gpio_chip; + int ret; + + /* Set all GPIOs to local input mode */ + ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); + ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); + + scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", + dev_name(dev)); + + gc->label = priv->gpio_chip_name; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->base = -1; + gc->can_sleep = 1; + gc->ngpio = UB953_NUM_GPIOS; + gc->get_direction = ub953_gpio_get_direction; + gc->direction_input = ub953_gpio_direction_in; + gc->direction_output = ub953_gpio_direction_out; + gc->get = ub953_gpio_get; + gc->set = ub953_gpio_set; + gc->of_xlate = ub953_gpio_of_xlate; + gc->of_node = priv->client->dev.of_node; + gc->of_gpio_n_cells = 2; + + ret = gpiochip_add_data(gc, priv); + if (ret) { + dev_err(dev, "Failed to add GPIOs: %d\n", ret); + return ret; + } + + return 0; +} + +static void ub953_gpiochip_remove(struct ub953_data *priv) +{ + gpiochip_remove(&priv->gpio_chip); +} + +/* + * V4L2 + */ + +static int _ub953_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + }; + int ret; + + /* + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until + * frame desc is made dynamically allocated. + */ + + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) + return -EINVAL; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int ub953_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct ub953_data *priv = sd_to_ub953(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) + return -EBUSY; + + return _ub953_set_routing(sd, state, routing); +} + +static int ub953_get_source_frame_desc(struct ub953_data *priv, + struct v4l2_mbus_frame_desc *desc) +{ + struct media_pad *pad; + int ret; + + pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); + if (!pad) + return -EPIPE; + + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, + desc); + if (ret) + return ret; + + return 0; +} + +static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct ub953_data *priv = sd_to_ub953(sd); + const struct v4l2_subdev_krouting *routing; + struct v4l2_mbus_frame_desc source_fd; + struct v4l2_subdev_route *route; + struct v4l2_subdev_state *state; + int ret; + + if (pad != UB953_PAD_SOURCE) + return -EINVAL; + + ret = ub953_get_source_frame_desc(priv, &source_fd); + if (ret) + return ret; + + state = v4l2_subdev_lock_and_get_active_state(sd); + + routing = &state->routing; + + memset(fd, 0, sizeof(*fd)); + + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; + + for_each_active_route(routing, route) { + struct v4l2_mbus_frame_desc_entry *source_entry = NULL; + unsigned int i; + + if (route->source_pad != pad) + continue; + + for (i = 0; i < source_fd.num_entries; ++i) + if (source_fd.entry[i].stream == route->sink_stream) { + source_entry = &source_fd.entry[i]; + break; + } + + if (!source_entry) { + dev_err(&priv->client->dev, + "Failed to find stream from source frame desc\n"); + ret = -EPIPE; + goto out; + } + + fd->entry[fd->num_entries].stream = route->source_stream; + fd->entry[fd->num_entries].flags = source_entry->flags; + fd->entry[fd->num_entries].length = source_entry->length; + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; + fd->entry[fd->num_entries].bus.csi2.vc = + source_entry->bus.csi2.vc; + fd->entry[fd->num_entries].bus.csi2.dt = + source_entry->bus.csi2.dt; + + fd->num_entries++; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int ub953_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && + priv->enabled_source_streams) + return -EBUSY; + + /* No transcoding, source and sink formats must match. */ + if (format->pad == UB953_PAD_SOURCE) + return v4l2_subdev_get_fmt(sd, state, format); + + /* Set sink format */ + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + /* Propagate to source format */ + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + return 0; +} + +static int ub953_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .sink_pad = UB953_PAD_SINK, + .sink_stream = 0, + .source_pad = UB953_PAD_SOURCE, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + return _ub953_set_routing(sd, state, &routing); +} + +static int ub953_log_status(struct v4l2_subdev *sd) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct device *dev = &priv->client->dev; + u8 v = 0, v1 = 0, v2 = 0; + unsigned int i; + char id[7]; + u8 gpio_local_data; + u8 gpio_input_ctrl; + u8 gpio_pin_sts; + + for (i = 0; i < 6; ++i) + ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); + id[6] = 0; + + dev_info(dev, "ID '%s'\n", id); + + ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); + dev_info(dev, "GENERAL_STATUS %#x\n", v); + + ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); + ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); + dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); + + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); + dev_info(dev, "CSI error count %u\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); + dev_info(dev, "CSI_ERR_STATUS %#x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); + dev_info(dev, "CSI_ERR_DLANE01 %#x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); + dev_info(dev, "CSI_ERR_DLANE23 %#x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); + dev_info(dev, "CSI_ERR_CLK_LANE %#x\n", v); + + ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); + dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); + + ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1); + ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2); + dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); + + ub953_read(priv, UB953_REG_CSI_ECC, &v); + dev_info(dev, "CSI ECC %#x\n", v); + + ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); + ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); + ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); + + for (i = 0; i < UB953_NUM_GPIOS; ++i) { + dev_info(dev, + "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", + i, + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)), + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)), + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)), + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)), + !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i))); + } + + return 0; +} + +static int ub953_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct media_pad *remote_pad; + u64 sink_streams; + int ret; + + if (streams_mask & priv->enabled_source_streams) + return -EALREADY; + + sink_streams = v4l2_subdev_state_xlate_streams( + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); + + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); + + ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams |= streams_mask; + + return 0; +} + +static int ub953_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct media_pad *remote_pad; + int ret; + u64 sink_streams; + + if ((streams_mask & priv->enabled_source_streams) != streams_mask) + return -EALREADY; + + sink_streams = v4l2_subdev_state_xlate_streams( + state, UB953_PAD_SOURCE, UB953_PAD_SINK, &streams_mask); + + remote_pad = media_pad_remote_pad_first(&priv->pads[UB953_PAD_SINK]); + + ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams &= ~streams_mask; + + return 0; +} + +static const struct v4l2_subdev_pad_ops ub953_pad_ops = { + .enable_streams = ub953_enable_streams, + .disable_streams = ub953_disable_streams, + .set_routing = ub953_set_routing, + .get_frame_desc = ub953_get_frame_desc, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = ub953_set_fmt, + .init_cfg = ub953_init_cfg, +}; + +static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { + .log_status = ub953_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_ops ub953_subdev_ops = { + .core = &ub953_subdev_core_ops, + .pad = &ub953_pad_ops, +}; + +static const struct media_entity_operations ub953_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +enum { + TEST_PATTERN_DISABLED = 0, + TEST_PATTERN_V_COLOR_BARS_1, + TEST_PATTERN_V_COLOR_BARS_2, + TEST_PATTERN_V_COLOR_BARS_4, + TEST_PATTERN_V_COLOR_BARS_8, +}; + +static const char *const ub953_tpg_qmenu[] = { + "Disabled", + "1 vertical color bar", + "2 vertical color bars", + "4 vertical color bars", + "8 vertical color bars", +}; + +static int ub953_enable_tpg(struct ub953_data *priv, int tpg_num) +{ + struct v4l2_subdev *sd = &priv->sd; + struct v4l2_subdev_state *state; + struct v4l2_mbus_framefmt *fmt; + u8 vbp, vfp; + u16 blank_lines; + u16 width; + u16 height; + + u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ + u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; + u8 num_cbars = 1 << cbars_idx; + + u16 line_size; /* Line size [bytes] */ + u16 bar_size; /* cbar size [bytes] */ + u16 act_lpf; /* active lines/frame */ + u16 tot_lpf; /* tot lines/frame */ + u16 line_pd; /* Line period in 10-ns units */ + + u16 fps = 30; + + vbp = 33; + vfp = 10; + blank_lines = vbp + vfp + 2; /* total blanking lines */ + + state = v4l2_subdev_get_locked_active_state(sd); + + if (state->routing.num_routes != 1) + return -EINVAL; + + fmt = v4l2_subdev_state_get_stream_format(state, UB953_PAD_SOURCE, 0); + if (!fmt) + return -EINVAL; + + if (fmt->code != MEDIA_BUS_FMT_UYVY8_1X16) + return -EINVAL; + + width = fmt->width; + height = fmt->height; + + line_size = width * bytespp; + bar_size = line_size / num_cbars; + act_lpf = height; + tot_lpf = act_lpf + blank_lines; + line_pd = 100000000 / fps / tot_lpf; + + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, + UB953_IND_PGEN_CTL_PGEN_ENABLE); + + /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CFG, + cbars_idx << 4 | 0x2); + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CSI_DI, + 0x1e); + + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, + UB953_IND_PGEN_LINE_SIZE1, line_size); + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, + UB953_IND_PGEN_BAR_SIZE1, bar_size); + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, + UB953_IND_PGEN_ACT_LPF1, act_lpf); + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, + UB953_IND_PGEN_TOT_LPF1, tot_lpf); + ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, + UB953_IND_PGEN_LINE_PD1, line_pd); + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VBP, + vbp); + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VFP, + vfp); + + return 0; +} + +static void ub953_disable_tpg(struct ub953_data *priv) +{ + ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, + 0x0); +} + +static int ub953_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ub953_data *priv = + container_of(ctrl->handler, struct ub953_data, ctrl_handler); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_TEST_PATTERN: + if (ctrl->val == 0) + ub953_disable_tpg(priv); + else + ret = ub953_enable_tpg(priv, ctrl->val); + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops ub953_ctrl_ops = { + .s_ctrl = ub953_s_ctrl, +}; + +static int ub953_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *source_subdev, + struct v4l2_async_subdev *asd) +{ + struct ub953_data *priv = sd_to_ub953(notifier->sd); + struct device *dev = &priv->client->dev; + unsigned int src_pad; + int ret; + + ret = media_entity_get_fwnode_pad(&source_subdev->entity, + source_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "Failed to find pad for %s\n", + source_subdev->name); + return ret; + } + + priv->source_sd = source_subdev; + src_pad = ret; + + ret = media_create_pad_link( + &source_subdev->entity, src_pad, &priv->sd.entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "Unable to link %s:%u -> %s:0\n", + source_subdev->name, src_pad, priv->sd.name); + return ret; + } + + return 0; +} + +static const struct v4l2_async_notifier_operations ub953_notify_ops = { + .bound = ub953_notify_bound, +}; + +static int ub953_v4l2_notifier_register(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct v4l2_async_subdev *asd; + struct device_node *ep_node; + int ret; + + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + if (!ep_node) { + dev_err(dev, "No graph endpoint\n"); + return -ENODEV; + } + + v4l2_async_nf_init(&priv->notifier); + + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, + of_fwnode_handle(ep_node), + struct v4l2_async_subdev); + + of_node_put(ep_node); + + if (IS_ERR(asd)) { + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); + v4l2_async_nf_cleanup(&priv->notifier); + return PTR_ERR(asd); + } + + priv->notifier.ops = &ub953_notify_ops; + + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register subdev_notifier"); + v4l2_async_nf_cleanup(&priv->notifier); + return ret; + } + + return 0; +} + +static void ub953_v4l2_notifier_unregister(struct ub953_data *priv) +{ + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); +} + +/* + * Probing + */ + +static int ub953_i2c_master_init(struct ub953_data *priv) +{ + /* i2c fast mode */ + u32 ref = 26250000; + u32 scl_high = 915; /* ns */ + u32 scl_low = 1641; /* ns */ + int ret; + + scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5; + scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5; + + ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high); + if (ret) + return ret; + + ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low); + if (ret) + return ret; + + return 0; +} + +static u64 ub953_get_fc_rate(struct ub953_data *priv) +{ + if (priv->hw_data->ub971) { + switch (priv->mode) { + case UB953_MODE_SYNC: + return priv->plat_data->bc_rate * 160ull; + default: + /* Not supported */ + return 0; + } + } else { + switch (priv->mode) { + case UB953_MODE_SYNC: + return priv->plat_data->bc_rate / 2 * 160ull; + default: + /* Not supported */ + return 0; + } + } +} + +static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, + unsigned long target, u64 fc, + u8 *hs_div, u8 *m, u8 *n) +{ + /* + * We always use 4 as a pre-divider (HS_CLK_DIV = 2). + * + * According to the datasheet: + * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)." + * - "if it is not possible to have an integer ratio of N/M, it is best to + * select a smaller value for HS_CLK_DIV. + * + * For above reasons the default HS_CLK_DIV seems the best in the average + * case. Use always that value to keep the code simple. + */ + static const unsigned long hs_clk_div = 4; + + u64 fc_divided; + unsigned long mul, div; + unsigned long res; + + /* clkout = fc / hs_clk_div * m / n */ + + fc_divided = div_u64(fc, hs_clk_div); + + rational_best_approximation(target, fc_divided, (1 << 5) - 1, + (1 << 8) - 1, &mul, &div); + + res = div_u64(fc_divided * mul, div); + + *hs_div = hs_clk_div; + *m = mul; + *n = div; + + return res; +} + +static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv, + unsigned long target, u64 fc, + u8 *m, u8 *n) +{ + u64 fc_divided; + unsigned long mul, div; + unsigned long res; + + /* clkout = fc * m / (8 * n) */ + + fc_divided = div_u64(fc, 8); + + rational_best_approximation(target, fc_divided, (1 << 5) - 1, + (1 << 8) - 1, &mul, &div); + + res = div_u64(fc_divided * mul, div); + + *m = mul; + *n = div; + + return res; +} + +static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + struct device *dev = &priv->client->dev; + u8 ctrl0, ctrl1; + u32 mul, div; + u64 fc_rate; + u32 hs_clk_div; + u64 rate; + int ret; + + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0); + if (ret) { + dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret); + return 0; + } + + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1); + if (ret) { + dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret); + return 0; + } + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->ub971) { + mul = ctrl0 & 0x1f; + div = ctrl1; + + if (div == 0) + return 0; + + rate = div_u64(fc_rate * mul, 8 * div); + + dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n", + fc_rate, mul, div, rate); + } else { + mul = ctrl0 & 0x1f; + hs_clk_div = 1 << (ctrl0 >> 5); + div = ctrl1; + + if (div == 0) + return 0; + + rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div); + + dev_dbg(dev, + "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n", + fc_rate, hs_clk_div, mul, div, rate); + } + + return rate; +} + +static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + struct device *dev = &priv->client->dev; + unsigned long res; + u64 fc_rate; + u8 hs_div, m, n; + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->ub971) { + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); + + dev_dbg(dev, + "%s %llu * %u / (8 * %u) = %lu (requested %lu)", + __func__, fc_rate, m, n, res, rate); + } else { + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); + + dev_dbg(dev, + "%s %llu / %u * %u / %u = %lu (requested %lu)", + __func__, fc_rate, hs_div, m, n, res, rate); + } + + return res; +} + +static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + u64 fc_rate; + u8 hs_div, m, n; + unsigned long res; + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->ub971) { + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); + } else { + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); + } + + dev_dbg(&priv->client->dev, + "%s %lu (requested %lu)\n", __func__, res, rate); + + return 0; +} + +static const struct clk_ops ub953_clkout_ops = { + .recalc_rate = ub953_clkout_recalc_rate, + .round_rate = ub953_clkout_round_rate, + .set_rate = ub953_clkout_set_rate, +}; + +static void ub953_init_clkout_ub953(struct ub953_data *priv) +{ + u64 fc_rate; + u8 hs_div, m, n; + + fc_rate = ub953_get_fc_rate(priv); + + ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); +} + +static void ub953_init_clkout_ub971(struct ub953_data *priv) +{ + u64 fc_rate; + u8 m, n; + + fc_rate = ub953_get_fc_rate(priv); + + ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); +} + +static int ub953_register_clkout(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + const struct clk_init_data init = { + .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out", + priv->hw_data->model, dev_name(dev)), + .ops = &ub953_clkout_ops, + }; + int ret; + + /* Initialize clkout to 25MHz by default */ + if (priv->hw_data->ub971) + ub953_init_clkout_ub971(priv); + else + ub953_init_clkout_ub953(priv); + + priv->clkout_clk_hw.init = &init; + + ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw); + kfree(init.name); + if (ret) + return dev_err_probe(dev, ret, "Cannot register clock HW\n"); + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &priv->clkout_clk_hw); + if (ret) + return dev_err_probe(dev, ret, + "Cannot add OF clock provider\n"); + + return 0; +} + +static int ub953_add_i2c_adapter(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *i2c_handle; + int ret; + + i2c_handle = device_get_named_child_node(dev, "i2c"); + if (!i2c_handle) + return 0; + + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, + i2c_handle); + + fwnode_handle_put(i2c_handle); + + if (ret) + return ret; + + return 0; +} + +static const struct regmap_config ub953_regmap_config = { + .name = "ds90ub953", + .reg_bits = 8, + .val_bits = 8, + .reg_format_endian = REGMAP_ENDIAN_DEFAULT, + .val_format_endian = REGMAP_ENDIAN_DEFAULT, +}; + +static int ub953_parse_dt(struct ub953_data *priv) +{ + struct device_node *np = priv->client->dev.of_node; + struct device *dev = &priv->client->dev; + struct device_node *ep_np; + int ret; + + if (!np) { + dev_err(dev, "OF: no device tree node!\n"); + return -ENOENT; + } + + ep_np = of_graph_get_endpoint_by_regs(np, 0, 0); + if (!ep_np) { + dev_err(dev, "OF: no endpoint\n"); + return -ENOENT; + } + + ret = of_property_count_u32_elems(ep_np, "data-lanes"); + + of_node_put(ep_np); + + if (ret <= 0) { + dev_err(dev, "OF: failed to parse data-lanes: %d\n", ret); + return ret; + } + + if (ret != 1 && ret != 2 && ret != 4) { + dev_err(dev, "OF: bad number of data-lanes: %d\n", ret); + return -EINVAL; + } + + priv->num_data_lanes = ret; + + return 0; +} + +static int ub953_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub953_data *priv; + int ret; + u8 v; + bool mode_override; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->hw_data = of_device_get_match_data(dev); + if (!priv->hw_data) + return -ENODEV; + + priv->plat_data = dev_get_platdata(&client->dev); + if (!priv->plat_data) { + dev_err(dev, "Platform data missing\n"); + return -ENODEV; + } + + mutex_init(&priv->reg_lock); + + /* + * Initialize to invalid values so that the first reg writes will + * configure the target. + */ + priv->current_indirect_target = 0xff; + + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(dev, "Failed to init regmap\n"); + ret = PTR_ERR(priv->regmap); + goto err_mutex_destroy; + } + + ret = ub953_parse_dt(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); + if (ret) + goto err_mutex_destroy; + + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) { + dev_err(dev, "Mode value not stabilized\n"); + ret = -ENODEV; + goto err_mutex_destroy; + } + + mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; + + switch (v & UB953_REG_MODE_SEL_MODE_MASK) { + case 0: + priv->mode = UB953_MODE_SYNC; + break; + case 2: + priv->mode = UB953_MODE_NONSYNC_EXT; + break; + case 3: + priv->mode = UB953_MODE_NONSYNC_INT; + break; + case 5: + priv->mode = UB953_MODE_DVP; + break; + default: + dev_err(dev, "Illegal mode in mode register\n"); + ret = -ENODEV; + goto err_mutex_destroy; + } + + dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", + priv->mode); + + if (priv->mode != UB953_MODE_SYNC) { + dev_err(dev, "Only synchronous mode supported\n"); + ret = -ENODEV; + goto err_mutex_destroy; + } + + ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); + if (ret) { + dev_err(dev, "Failed to read revision: %d", ret); + goto err_mutex_destroy; + } + + dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); + + ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); + if (ret) + goto err_mutex_destroy; + + dev_dbg(dev, "i2c strap setting %s V\n", + (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); + + ret = ub953_i2c_master_init(priv); + if (ret) { + dev_err(dev, "i2c init failed: %d\n", ret); + goto err_mutex_destroy; + } + + ret = ub953_gpiochip_probe(priv); + if (ret) { + dev_err(dev, "Failed to init gpiochip\n"); + goto err_mutex_destroy; + } + + ub953_write(priv, UB953_REG_GENERAL_CFG, + UB953_REG_GENERAL_CFG_CONT_CLK | + ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | + UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); + + ret = ub953_register_clkout(priv); + if (ret) { + dev_err(dev, "Failed to register clkout\n"); + goto err_gpiochip_remove; + } + + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); + + v4l2_ctrl_handler_init(&priv->ctrl_handler, + ARRAY_SIZE(ub953_tpg_qmenu) - 1); + priv->sd.ctrl_handler = &priv->ctrl_handler; + + v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub953_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0, + ub953_tpg_qmenu); + + if (priv->ctrl_handler.error) { + ret = priv->ctrl_handler.error; + goto err_gpiochip_remove; + } + + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | + V4L2_SUBDEV_FL_STREAMS; + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + priv->sd.entity.ops = &ub953_entity_ops; + + priv->pads[0].flags = MEDIA_PAD_FL_SINK; + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); + if (ret) { + dev_err(dev, "Failed to init pads\n"); + goto err_remove_ctrls; + } + + priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); + priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); + + priv->sd.state_lock = priv->sd.ctrl_handler->lock; + + ret = v4l2_subdev_init_finalize(&priv->sd); + if (ret) + goto err_entity_cleanup; + + ret = ub953_v4l2_notifier_register(priv); + if (ret) { + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); + goto err_free_state; + } + + ret = v4l2_async_register_subdev(&priv->sd); + if (ret) { + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); + goto err_unreg_notif; + } + + ret = ub953_add_i2c_adapter(priv); + if (ret) { + dev_err(dev, "failed to add remote i2c adapter\n"); + goto err_unreg_async_subdev; + } + + return 0; + +err_unreg_async_subdev: + v4l2_async_unregister_subdev(&priv->sd); +err_unreg_notif: + ub953_v4l2_notifier_unregister(priv); +err_free_state: + v4l2_subdev_cleanup(&priv->sd); +err_entity_cleanup: + if (priv->tx_ep_np) + of_node_put(priv->tx_ep_np); + + media_entity_cleanup(&priv->sd.entity); +err_remove_ctrls: + v4l2_ctrl_handler_free(&priv->ctrl_handler); +err_gpiochip_remove: + ub953_gpiochip_remove(priv); +err_mutex_destroy: + mutex_destroy(&priv->reg_lock); + + return ret; +} + +static void ub953_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ub953_data *priv = sd_to_ub953(sd); + + i2c_atr_del_adapter(priv->plat_data->atr, + priv->plat_data->port); + + v4l2_async_unregister_subdev(&priv->sd); + + ub953_v4l2_notifier_unregister(priv); + + v4l2_subdev_cleanup(&priv->sd); + + of_node_put(priv->tx_ep_np); + + media_entity_cleanup(&priv->sd.entity); + + v4l2_ctrl_handler_free(&priv->ctrl_handler); + + ub953_gpiochip_remove(priv); + mutex_destroy(&priv->reg_lock); +} + +static const struct ub953_hw_data ds90ub953_hw = { + .model = "ub953", +}; + +static const struct ub953_hw_data ds90ub971_hw = { + .model = "ub971", + .ub971 = true, +}; + +static const struct i2c_device_id ub953_id[] = { + { "ds90ub953-q1", 0 }, + { "ds90ub971-q1", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ub953_id); + +#ifdef CONFIG_OF +static const struct of_device_id ub953_dt_ids[] = { + { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, + { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, + {} +}; +MODULE_DEVICE_TABLE(of, ub953_dt_ids); +#endif + +static struct i2c_driver ds90ub953_driver = { + .probe_new = ub953_probe, + .remove = ub953_remove, + .id_table = ub953_id, + .driver = { + .name = "ds90ub953", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ub953_dt_ids), + }, +}; + +module_i2c_driver(ds90ub953_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Texas Instruments DS90UB953 serializer driver"); +MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>"); +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>"); +MODULE_IMPORT_NS(I2C_ATR);
Add driver for TI DS90UB953 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> --- drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ds90ub953.c | 1590 +++++++++++++++++++++++++++++++++ 3 files changed, 1604 insertions(+) create mode 100644 drivers/media/i2c/ds90ub953.c